Philippi - automatal bike ACE 24/45 - 24 V / 45 a
€1,157.90*
% €1,219.00* (5.01% saved vs. recommended price)will be ordered for you
Available in 5 days according to manufacturer**, delivery time 3-5 Tage
Product number:
1970966
Product information "Philippi - automatal bike ACE 24/45 - 24 V / 45 a"
Automatic charger for medium and large battery installations for the individual charge of up to 3 groups of batteries (starter, service and bow battery) and capacities up to 1000 Ah.
The large models of the ACE series are also equipped with the currently most modern switching power supply technology and deliver the full capacity up to an ambient temperature of 50 ° C.
And so it is in the Mediterranean area at any time the full power available.
The automatic detection of the AC input voltage, in conjunction with the wide AC input voltage range from 90 to 265 V / 47-65 Hz that the device can be used worldwide without compromising performance.
Hence always full charging power is supplied independently of the AC power source or generator.
The lightweight, rugged aluminum housing can be installed quickly and securely using the supplied wall bracket.
The devices are optimized in terms of moisture protection and cooling for wall mounting.
The electrical connection area is covered by a front flap and allows safe and protected from the environment installation.
The front LED status display provides information on the device status, optionally, a 2.4 "color TFT monitor are integrated.
The device cooling takes place via a controlled fan.
The 5-stage charge characteristic for rapid and complete charging for all types of batteries: lead acid, maintenance-free, calcium-tin, AGM, GEL, lithium, custom curve, power supply mode.
The temperature sensor supplied adjusts the charging curve to the battery temperature.
a PSM-monitor can be connected to the remote monitoring of the charge to the integrated P-BUS (ACE-T cable required) interface.
- Charging current: 45 A
- Rated voltage: 24 V
. - Rec Battery Capacity: 200-450 Ah
- input voltage range: 90 - 265 VAC (47 - 65 Hz), typical 87% efficiency
- AC current consumption 230/115 V: 6.8 A / 13.6 A
- Outputs: 3, each output can output the maximum charging current
- connecting bolts: M6
- Dimensions (LxWxH): 270 x 360 x 130 mm
- Weight: 5.2 kg
- charging characteristics: IU or IUoU by internal DIP switch.
- battery types: Wet, GEL, AGM, lead-calcium, LiFePO4, DC power supply mode, Speed
The large models of the ACE series are also equipped with the currently most modern switching power supply technology and deliver the full capacity up to an ambient temperature of 50 ° C.
And so it is in the Mediterranean area at any time the full power available.
The automatic detection of the AC input voltage, in conjunction with the wide AC input voltage range from 90 to 265 V / 47-65 Hz that the device can be used worldwide without compromising performance.
Hence always full charging power is supplied independently of the AC power source or generator.
The lightweight, rugged aluminum housing can be installed quickly and securely using the supplied wall bracket.
The devices are optimized in terms of moisture protection and cooling for wall mounting.
The electrical connection area is covered by a front flap and allows safe and protected from the environment installation.
The front LED status display provides information on the device status, optionally, a 2.4 "color TFT monitor are integrated.
The device cooling takes place via a controlled fan.
The 5-stage charge characteristic for rapid and complete charging for all types of batteries: lead acid, maintenance-free, calcium-tin, AGM, GEL, lithium, custom curve, power supply mode.
The temperature sensor supplied adjusts the charging curve to the battery temperature.
a PSM-monitor can be connected to the remote monitoring of the charge to the integrated P-BUS (ACE-T cable required) interface.
- Charging current: 45 A
- Rated voltage: 24 V
. - Rec Battery Capacity: 200-450 Ah
- input voltage range: 90 - 265 VAC (47 - 65 Hz), typical 87% efficiency
- AC current consumption 230/115 V: 6.8 A / 13.6 A
- Outputs: 3, each output can output the maximum charging current
- connecting bolts: M6
- Dimensions (LxWxH): 270 x 360 x 130 mm
- Weight: 5.2 kg
- charging characteristics: IU or IUoU by internal DIP switch.
- battery types: Wet, GEL, AGM, lead-calcium, LiFePO4, DC power supply mode, Speed
Herstellernummer: 0 4524 4523