€502.40*
% €591.43* (15.05% saved vs. recommended price)will be ordered for you
Lead time: 7 days (according to manufacturer**),
est. total delivery time: 1-2 weeks
Product number:
1753501
EAN:
8719076023258
Manufacturer product ID:
PCH012030001
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "VICTRON - Phoenix Charger 12V / 30A"
Adaptive four-stage charge characteristic: bulk - absorption - float - storage. The microprocessor-controlled "adaptive" battery management system can be adapted to different types of batteries. The adaptive feature will automatically optimize the process relative to the way the battery.
Two outputs, each with full output current, for the simultaneous charge of two battery packs. Each output provides the full current.
Additional output (4 A) to maintain the charge of the starter battery.
The right amount of charge: variable absorption time.
At low battery discharge, a short absorption is chosen to avoid overcharging and excessive gas development. After a deep discharge the absorption time is automatically extended to be able to fully charge the battery.
The charger switches to Phoenix "storage" if more than 24 hours there is no discharge. The voltage is then reduced to 2.2 V / cell (13.2 V for a 12 V battery). In the battery then hardly gassing and corrosion of the positive plates is limited to a minimum. Once a
Week the voltage is increased to the absorption level to recharge the battery. Prevents stratification of the electrolyte and prevent sulfation.
To increase battery life: temperature compensation. Every Phoenix charger, a temperature sensor is included. The temperature sensor provides a decreasing charge voltage with increasing battery temperature. This is particularly important for maintenance-free batteries, which otherwise
threaten to dry out by overcharging.
Voltage sensor (voltage sense): measuring the charging voltage directly on the battery or the DC distribution. To compensate for voltage loss due to the resistance of the charging cable, the Phoenix have chargers via a "Voltage Sense" function. It ensures that the
Battery always receives the correct charge voltage
Input voltage: 90-265 VAC, 45-65 Hz / 90-400 V DC
Charging voltage -absorption-: 14.4 V DC
Float voltage: 13.8 V DC
Storage Mode: 13.2 V DC
Charge current house battery: 30 A
Charging current starter battery: 4 A
Charging characteristics: 4 steps adaptively
Battery capacity: 100 to 400 Ah
Temperature sensor: yes
Can be used as power supply: yes
Cooling (active): yes
Protection: short circuit, battery reverse polarity detection, Battery voltage too high, too high a temperature
Operating temperature range: -20 to 60 ° C max, Rel humidity.. 95%
Battery connections: M6 bolt
AC connection: screw terminal 4 mm² (AWG6)
Protection: IP21
Weight: 3,8 kg
Dimensions (HxBxT): 350 x 200 x 108 mm
Two outputs, each with full output current, for the simultaneous charge of two battery packs. Each output provides the full current.
Additional output (4 A) to maintain the charge of the starter battery.
The right amount of charge: variable absorption time.
At low battery discharge, a short absorption is chosen to avoid overcharging and excessive gas development. After a deep discharge the absorption time is automatically extended to be able to fully charge the battery.
The charger switches to Phoenix "storage" if more than 24 hours there is no discharge. The voltage is then reduced to 2.2 V / cell (13.2 V for a 12 V battery). In the battery then hardly gassing and corrosion of the positive plates is limited to a minimum. Once a
Week the voltage is increased to the absorption level to recharge the battery. Prevents stratification of the electrolyte and prevent sulfation.
To increase battery life: temperature compensation. Every Phoenix charger, a temperature sensor is included. The temperature sensor provides a decreasing charge voltage with increasing battery temperature. This is particularly important for maintenance-free batteries, which otherwise
threaten to dry out by overcharging.
Voltage sensor (voltage sense): measuring the charging voltage directly on the battery or the DC distribution. To compensate for voltage loss due to the resistance of the charging cable, the Phoenix have chargers via a "Voltage Sense" function. It ensures that the
Battery always receives the correct charge voltage
Input voltage: 90-265 VAC, 45-65 Hz / 90-400 V DC
Charging voltage -absorption-: 14.4 V DC
Float voltage: 13.8 V DC
Storage Mode: 13.2 V DC
Charge current house battery: 30 A
Charging current starter battery: 4 A
Charging characteristics: 4 steps adaptively
Battery capacity: 100 to 400 Ah
Temperature sensor: yes
Can be used as power supply: yes
Cooling (active): yes
Protection: short circuit, battery reverse polarity detection, Battery voltage too high, too high a temperature
Operating temperature range: -20 to 60 ° C max, Rel humidity.. 95%
Battery connections: M6 bolt
AC connection: screw terminal 4 mm² (AWG6)
Protection: IP21
Weight: 3,8 kg
Dimensions (HxBxT): 350 x 200 x 108 mm