€502.40*
% €591.43* (15.05% saved vs. recommended price)will be ordered for you
Lead time: 7 days (according to manufacturer**),
est. total delivery time: 1-2 weeks
Product number:
1753701
EAN:
8719076023272
Manufacturer product ID:
PCH024016001
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "VICTRON - Phoenix charger 24V / 16A"
Adaptive four -stage charging characteristic: Bulk - absorption - Float - storage. The microprocessor-controlled "adaptive" battery management system can be matched to various battery types. The adaptive function automatically adjusts the charging process to the use of the battery.
Two outputs, each with a full output current, for the simultaneous load of two batteries. Each output delivers the full current.
Additional output (4 a) for cargo maintenance for starter battery.
The correct charge quantity: adapted absorption time.
With a low battery discharge, a short absorption is chosen to avoid overload and excessive gas development. After a deep discharge, the absorption period is automatically extended in order to be able to load the battery in full.
The Phoenix charger switches to “storage” if there is no discharge for more than 24 hours. The voltage is then reduced to 2.2 V / cell (13.2 V for a 12-V battery). Hardly any gas develops in the battery and the corrosion of the anode plates is limited to a minimum. Once a
Week increases the tension to the absorption level to recharge the battery. This prevents layer formation in electrolyte and sulfuring.
Higher battery life due to temperature compensation. A temperature sensor is included for each Phoenix charger. The temperature sensor ensures a decreasing charging voltage with increasing battery temperature. This is particularly important for maintenance -free batteries that otherwise
threaten to dry out overload.
Tension sensor (Voltage Sense): Measure the charging voltage directly on the battery or on the DC distributor. To compensate for voltage losses as a result of the resistance of the charging cables, the Phoenix chargers have a "Voltage Sense" function. It ensures that the
Battery receives the correct charging voltage at any time
Input voltage: 90–265 V AC, 45-65 Hz / 90-400 V DC
Charging tension -absorption-: 28.8 V DC
Conservation voltage: 27.6 V DC
Storage fashion: 26.4 V DC
Charging current on -board net battery: 16 a
Charging current starter battery: 4 a
Charging characteristics: 4 steps adaptive
Battery capacity: 100 - 200 Ah
Temperature sensor: Yes
Can be used as a power supply: yes
Cooling (active): Yes
Protection: Short circuit, battery solving recognition, too high battery voltage, too high temperature
Operating temperature range: -20 to 60 ° C, rel. Air humidity max. 95 %
Battery connections: M6 bolts
AC connection: screw clamp 4 mm² (AWG6)
Protection class: IP21
Weight: 3.8 kg
Dimensions (HXBXT): 350 x 200 x 108 mm
Two outputs, each with a full output current, for the simultaneous load of two batteries. Each output delivers the full current.
Additional output (4 a) for cargo maintenance for starter battery.
The correct charge quantity: adapted absorption time.
With a low battery discharge, a short absorption is chosen to avoid overload and excessive gas development. After a deep discharge, the absorption period is automatically extended in order to be able to load the battery in full.
The Phoenix charger switches to “storage” if there is no discharge for more than 24 hours. The voltage is then reduced to 2.2 V / cell (13.2 V for a 12-V battery). Hardly any gas develops in the battery and the corrosion of the anode plates is limited to a minimum. Once a
Week increases the tension to the absorption level to recharge the battery. This prevents layer formation in electrolyte and sulfuring.
Higher battery life due to temperature compensation. A temperature sensor is included for each Phoenix charger. The temperature sensor ensures a decreasing charging voltage with increasing battery temperature. This is particularly important for maintenance -free batteries that otherwise
threaten to dry out overload.
Tension sensor (Voltage Sense): Measure the charging voltage directly on the battery or on the DC distributor. To compensate for voltage losses as a result of the resistance of the charging cables, the Phoenix chargers have a "Voltage Sense" function. It ensures that the
Battery receives the correct charging voltage at any time
Input voltage: 90–265 V AC, 45-65 Hz / 90-400 V DC
Charging tension -absorption-: 28.8 V DC
Conservation voltage: 27.6 V DC
Storage fashion: 26.4 V DC
Charging current on -board net battery: 16 a
Charging current starter battery: 4 a
Charging characteristics: 4 steps adaptive
Battery capacity: 100 - 200 Ah
Temperature sensor: Yes
Can be used as a power supply: yes
Cooling (active): Yes
Protection: Short circuit, battery solving recognition, too high battery voltage, too high temperature
Operating temperature range: -20 to 60 ° C, rel. Air humidity max. 95 %
Battery connections: M6 bolts
AC connection: screw clamp 4 mm² (AWG6)
Protection class: IP21
Weight: 3.8 kg
Dimensions (HXBXT): 350 x 200 x 108 mm