- Power Supply
- Conductors and Installation
- Devices and Consumers
- Boat Accessories
- New Products
€138.40*
% €163.03* (15.11% saved vs. recommended price)1 in stock
Available, delivery time: 1-3 business days
Product number:
1972997
EAN:
8719076040170
Manufacturer product ID:
SCC110030210
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "VICTRON - Smart Solar MPPT 100/30"
Built -in Bluetooth Smart: No dongle necessary
The wireless solution for set-up, monitor and updated the controller using Apple and Android smartphones, tablets or other devices.
Ve.direct
For a wired data connection with a color control panel, a Venus GX, a PC or other devices.
Ultra -fast maximum power point tracking (mppt)
Especially when the sky is covered, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield compared to PWM charging controls by up to 30 % and compared to slower MPPT regulators by up to 10 %.
Advanced maximum Power Point detection in part shading.
In the event of a partial shading, two or more points of maximum performance (MPP) may be available on the electricity voltage curve.
Conventional MPTS tend to adjust to a local MPP. However, this may not be the optimal MPP.
The innovative algorithm of the Bluesolar device will always maximize the energy yield by adjusting itself to the optimal MPP.
Excellent efficiency
No cooling fan. Maximum efficiency at over 98 %.
Full of output current up to 40 C (104 ° f).
Flexible loading algorithms
Fully programmable loading algorithm (also note the software page on the Victron Energy website) and eight pre-programmed algorithms that can be selected using a rotary knob (other details can be found in the manual).
Comprehensive electronic protection
Overheating protection and load reduction at high temperatures.
Protection against PV short circuit and PV solutions.
PV backstream protection.
Internal temperature sensor
Compensates for constant and charging conservation voltages after temperature.
Options for displaying data in real time
- Apple and Android smartphones, tablets and other devices.
- Color Control panel
Battery voltage: 12/24V automatic choice
Nominal power: 30 a
Nominal PV performance, 12 V 1a, b): 440 W
Nominal PV performance, 24V 1A, b): 880 W
Maximum PV empty voltage: 100 V
Max. Short circuit current of the solar system 2): 35 a
Max. Effect: 98 %
Self -consumption 12V: 30 MA 24V: 20 MA
"Constant" charging voltage (absorption) Standard settings: 14.4 V / 28.8 V (adjustable)
"Conservation" charging voltage Standard settings: 13.8V / 27.6V (regulable)
Ladeal gorithm: multi -stage, adaptive
Temperature compensation: -16 mv/° C or -32 mv/° C
Protection: Polation on battery (backup, no access by the user) / PV solutions / output Short circuit / overheating / overheating
Operating temperature: -30 ° C to +60 ° C (full nominal output up to 40 ° C)
Moisture: 95 % not condensing
Data communication sport: ve.direct
Connections: 13 mm²/AWG6
Protection class: IP43 (electronic components), IP22 (connection area)
Weight: 1.3 kg
Dimensions (HXBXT): 130 x 186 x 70 mm
1a) If more PV current is connected, the controller limits the input power
1b) The PV voltage must reach at least the amount of VBAT + 5 V so that the controller takes up the operation.
Then the minimum value of the PV voltage is at VBAT + 1 V.
2) A higher short-circuit current can damage the controller in the event of a flat connection of the PV system.
The wireless solution for set-up, monitor and updated the controller using Apple and Android smartphones, tablets or other devices.
Ve.direct
For a wired data connection with a color control panel, a Venus GX, a PC or other devices.
Ultra -fast maximum power point tracking (mppt)
Especially when the sky is covered, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield compared to PWM charging controls by up to 30 % and compared to slower MPPT regulators by up to 10 %.
Advanced maximum Power Point detection in part shading.
In the event of a partial shading, two or more points of maximum performance (MPP) may be available on the electricity voltage curve.
Conventional MPTS tend to adjust to a local MPP. However, this may not be the optimal MPP.
The innovative algorithm of the Bluesolar device will always maximize the energy yield by adjusting itself to the optimal MPP.
Excellent efficiency
No cooling fan. Maximum efficiency at over 98 %.
Full of output current up to 40 C (104 ° f).
Flexible loading algorithms
Fully programmable loading algorithm (also note the software page on the Victron Energy website) and eight pre-programmed algorithms that can be selected using a rotary knob (other details can be found in the manual).
Comprehensive electronic protection
Overheating protection and load reduction at high temperatures.
Protection against PV short circuit and PV solutions.
PV backstream protection.
Internal temperature sensor
Compensates for constant and charging conservation voltages after temperature.
Options for displaying data in real time
- Apple and Android smartphones, tablets and other devices.
- Color Control panel
Battery voltage: 12/24V automatic choice
Nominal power: 30 a
Nominal PV performance, 12 V 1a, b): 440 W
Nominal PV performance, 24V 1A, b): 880 W
Maximum PV empty voltage: 100 V
Max. Short circuit current of the solar system 2): 35 a
Max. Effect: 98 %
Self -consumption 12V: 30 MA 24V: 20 MA
"Constant" charging voltage (absorption) Standard settings: 14.4 V / 28.8 V (adjustable)
"Conservation" charging voltage Standard settings: 13.8V / 27.6V (regulable)
Ladeal gorithm: multi -stage, adaptive
Temperature compensation: -16 mv/° C or -32 mv/° C
Protection: Polation on battery (backup, no access by the user) / PV solutions / output Short circuit / overheating / overheating
Operating temperature: -30 ° C to +60 ° C (full nominal output up to 40 ° C)
Moisture: 95 % not condensing
Data communication sport: ve.direct
Connections: 13 mm²/AWG6
Protection class: IP43 (electronic components), IP22 (connection area)
Weight: 1.3 kg
Dimensions (HXBXT): 130 x 186 x 70 mm
1a) If more PV current is connected, the controller limits the input power
1b) The PV voltage must reach at least the amount of VBAT + 5 V so that the controller takes up the operation.
Then the minimum value of the PV voltage is at VBAT + 1 V.
2) A higher short-circuit current can damage the controller in the event of a flat connection of the PV system.