- Power Supply
- Conductors and Installation
- Devices and Consumers
- Boat Accessories
- New Products
€52.40*
% €61.88* (15.32% saved vs. recommended price)will be ordered for you
Lead time: 7 days (according to manufacturer**),
est. total delivery time: 1-2 weeks
Product number:
1973643
EAN:
8719076043485
Manufacturer product ID:
BMS400100000
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "VICTRON - miniBMS - Battery Management System"
A simple and inexpensive alternative to Ve.Bus BMS
The minibms can replace the Ve.Bus BMS in several applications.
However, it is not suitable for use with Ve.Bus Multiplus and Quattro inverter/chargers: there is no Ve.Bus interface.
The minibms is designed for use with Victron Smart Lifepo4 batteries with M8 round connector.
The minibms has two outputs, similar to the Ve.Bus BMS.
Output "Load Disconnect"
The output "Load" (load) is usually on high and is placed on "Free Floating" when a cell sub voltage is imminent.
Maximum current: 1a. The output "Load" is not briefly secured.
The output "Load" can be used to control the following functions:
• A high current relay or shooter
• The remote-controlled input of the input of BatteryProtect, inverter or DC-Dckonverter or other loads.
(A non-inverting or inverting cable to switch on/off may be necessary. Please note the detailed manual on the Victron Energy website.)
Output "Charge Disconnect"
The output "Charger" (charger) is usually on high and becomes "free floating" when a cell overvoltage or over temperature is imminent.
Maximum current: 10 mA.
The output "Charger" (charger) is not suitable for an inductive load such. B. to operate a relay coil.
The output "Charger" (charger) can be used to control the following devices:
• Remote-controlled on/off switch of a charger
• Cyrix-li-charging relay.
• Cyrix-Li-CT battery coupler.
Input "System on/Off"
The "System on/OFF" input controls both outputs. If it is over, both outputs are switched to "Free Floating".
The loads and chargers are therefore switched off.
The "System On/Off" input has two connections: Remote L and Remote H.
A remote-controlled on/off switch or a relay contact can be connected between l and h.
Alternatively, connection h to a battery plus pole or L can be connected to a battery minus pole.
Protects 12V, 24V and 48V systems
Operating range voltage 8 to 70V DC.
LED display
• Load on (blue): load exit high (cell voltage> 2.8 V, can be regulated on the battery).
• Temp or OVP (red): Output charger "Free Floating" (due to the cell over temperature (> 50 ° C), cell sub-temperature (<5 c) or cell overvoltage).
Technical specifications:
Input voltage range Normal operation (VBAT) 8 - 70V DC
Electricity intake, normal operation 2.7 mA (without exit "load" and output current charger)
Electricity consumption; Low cell voltage 2MA
Electricity recording remote control from 1.5 mA
Load exit
Normally high (VBAT - 0.1 V)
Source current limit: 1 a (not short -circuit -resistant)
Senkstrom: 0A (output free floating)
Output charger
Normally high (VBAT - 0.6 V)
Source current limit: 10 mA (short -circuit -resistant)
Senkstrom: 0A (output free floating)
"System on/Off":
Remote L and Remote H
Use modes of the system on/off switch:
a. One if the connections are connected l and h (switch or relay contact)
b. One if the connection l is drawn to the minus pole of the battery (v <3.5 v)
c. One when the connection h is high (2.9 V d. From all other conditions
General
Operating temperature -20 to +50 ° C 0 - 120 ° F
Protection class IP20
CASING
Weight 0.1kg
Dimensions (HXBXT) 106 x 42 x 23mm
The minibms can replace the Ve.Bus BMS in several applications.
However, it is not suitable for use with Ve.Bus Multiplus and Quattro inverter/chargers: there is no Ve.Bus interface.
The minibms is designed for use with Victron Smart Lifepo4 batteries with M8 round connector.
The minibms has two outputs, similar to the Ve.Bus BMS.
Output "Load Disconnect"
The output "Load" (load) is usually on high and is placed on "Free Floating" when a cell sub voltage is imminent.
Maximum current: 1a. The output "Load" is not briefly secured.
The output "Load" can be used to control the following functions:
• A high current relay or shooter
• The remote-controlled input of the input of BatteryProtect, inverter or DC-Dckonverter or other loads.
(A non-inverting or inverting cable to switch on/off may be necessary. Please note the detailed manual on the Victron Energy website.)
Output "Charge Disconnect"
The output "Charger" (charger) is usually on high and becomes "free floating" when a cell overvoltage or over temperature is imminent.
Maximum current: 10 mA.
The output "Charger" (charger) is not suitable for an inductive load such. B. to operate a relay coil.
The output "Charger" (charger) can be used to control the following devices:
• Remote-controlled on/off switch of a charger
• Cyrix-li-charging relay.
• Cyrix-Li-CT battery coupler.
Input "System on/Off"
The "System on/OFF" input controls both outputs. If it is over, both outputs are switched to "Free Floating".
The loads and chargers are therefore switched off.
The "System On/Off" input has two connections: Remote L and Remote H.
A remote-controlled on/off switch or a relay contact can be connected between l and h.
Alternatively, connection h to a battery plus pole or L can be connected to a battery minus pole.
Protects 12V, 24V and 48V systems
Operating range voltage 8 to 70V DC.
LED display
• Load on (blue): load exit high (cell voltage> 2.8 V, can be regulated on the battery).
• Temp or OVP (red): Output charger "Free Floating" (due to the cell over temperature (> 50 ° C), cell sub-temperature (<5 c) or cell overvoltage).
Technical specifications:
Input voltage range Normal operation (VBAT) 8 - 70V DC
Electricity intake, normal operation 2.7 mA (without exit "load" and output current charger)
Electricity consumption; Low cell voltage 2MA
Electricity recording remote control from 1.5 mA
Load exit
Normally high (VBAT - 0.1 V)
Source current limit: 1 a (not short -circuit -resistant)
Senkstrom: 0A (output free floating)
Output charger
Normally high (VBAT - 0.6 V)
Source current limit: 10 mA (short -circuit -resistant)
Senkstrom: 0A (output free floating)
"System on/Off":
Remote L and Remote H
Use modes of the system on/off switch:
a. One if the connections are connected l and h (switch or relay contact)
b. One if the connection l is drawn to the minus pole of the battery (v <3.5 v)
c. One when the connection h is high (2.9 V d. From all other conditions
General
Operating temperature -20 to +50 ° C 0 - 120 ° F
Protection class IP20
CASING
Weight 0.1kg
Dimensions (HXBXT) 106 x 42 x 23mm