- Power Supply
- Conductors and Installation
- Devices and Consumers
- Boat Accessories
- New Products
€48.40*
% €57.12* (15.27% saved vs. recommended price)2 in stock
Available, delivery time: 1-3 business days
Product number:
1972978
EAN:
8719076025306
Manufacturer product ID:
SCC010010050R
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "Victron - Bluesolar Mppt 75/10"
Ultra fast Maximum Power Point Tracking (MPPT)
Especially in overcast sky, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield as compared to PWM charge controllers by up to 30% and in comparison to slower MPPTReglern by up to 10%.
load output
A can be prevented by all loads are connected to the output load to deep discharge of the battery.
The load output disconnects the loads when the battery has been up to a predetermined voltage value discharged.
Alternatively, can also choose an algorithm for intelligent battery management: See Battery Life.
The load output is short-circuit proof.
Some loads (particularly inverter) can be connected directly to the battery at best.
The inverter remote control is best to the load output connect. Under certain circumstances, a special interface cable is required, please refer to the manual.
Battery Life: intelligent battery management
If the solar charging controller is not able to charge the battery within one day up to its full capacity, the status of the battery changes constantly "partially loaded" and between "the end of discharge" back and forth.
This mode of operation (no regular full charging) damaged a lead-acid battery within a few weeks or months.
The Battery Life algorithm monitors the state of charge of the battery and, if necessary he lifts every day the threshold value for separating the load on (i. E., The load is disconnected earlier) until the recovered energy sufficient to charge the battery up to almost 100%.
From this point, the threshold value is modulated for the disconnection of the load, so that the charging nearly 100% is achieved about once weekly.
Programmable battery charging algorithm
For more information, see the section Software on the Victron Energy website.
Day / night time control and light insulation option
For more information, see the section Software on the Victron Energy website.
Options for programming, real-time data and display the course
- Modern Apple and Android smartphones, tablets, Macbooks and other devices: find screenshots for this purpose
In the info sheets of VE.Direct Bluetooth Smart dongle and the MPPT app.
Battery voltage: 12 / 24V automatic selection
Nominal charging current: 10A
Nominal PV power, 12 V 1a, b): 145W
Nominal PV power, 24 V 1a, b): 290W
Max. PV short-circuit current 2): 10A
Automatic load disconnect Yes, maximum load 15A
Maximum PV open voltage: 75V
Peak efficiency: 98%
Power consumption: 12V: 24V 20 mA: 10 mA
"Constant" -Ladespannung (absorption): 14.4V / 28.8V (adjustable)
"Conservation" -Ladespannung (float): 13.8V / 27.6V (adjustable)
Charging algorithm: multi-level, adaptive
Temperature Compensation: -16 mV / ° C and -32 mV / ° C
Uninterrupted / peak load current: 15A / 50A
Switching off the load at a low voltage: 11.1V / 22,2V or 11.8V / or 23,6V Battery Life algorithm
Reconnecting the load to a low voltage: 13,1V / 26,2V or 14V / 28V or Battery Life algorithm
Protection: Battery reverse polarity (fuse) Output short circuit / overheating
Operating Temperature: -30 ° C to + 60 ° C (full rated output up to 40 ° C)
Humidity: 95% non-condensing
Data communication port: VE.Direct
Connections: 6mm² / AWG10
Protection: IP43 (electronic components), IP22 (connection region
Weight: 0.5kg
Dimensions (HxWxD): 100 x 113 x 40mm
1a) If more PV power is connected, the controller limits the input power.
1b) The PV voltage must at least the height of Vbat + reach 5V, so that the controller operation Tapes. After that, the minimum value of the PV voltage at Vbat + 1V.
2) A PV system with a higher short-circuit current can damage the controller.
Especially in overcast sky, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield as compared to PWM charge controllers by up to 30% and in comparison to slower MPPTReglern by up to 10%.
load output
A can be prevented by all loads are connected to the output load to deep discharge of the battery.
The load output disconnects the loads when the battery has been up to a predetermined voltage value discharged.
Alternatively, can also choose an algorithm for intelligent battery management: See Battery Life.
The load output is short-circuit proof.
Some loads (particularly inverter) can be connected directly to the battery at best.
The inverter remote control is best to the load output connect. Under certain circumstances, a special interface cable is required, please refer to the manual.
Battery Life: intelligent battery management
If the solar charging controller is not able to charge the battery within one day up to its full capacity, the status of the battery changes constantly "partially loaded" and between "the end of discharge" back and forth.
This mode of operation (no regular full charging) damaged a lead-acid battery within a few weeks or months.
The Battery Life algorithm monitors the state of charge of the battery and, if necessary he lifts every day the threshold value for separating the load on (i. E., The load is disconnected earlier) until the recovered energy sufficient to charge the battery up to almost 100%.
From this point, the threshold value is modulated for the disconnection of the load, so that the charging nearly 100% is achieved about once weekly.
Programmable battery charging algorithm
For more information, see the section Software on the Victron Energy website.
Day / night time control and light insulation option
For more information, see the section Software on the Victron Energy website.
Options for programming, real-time data and display the course
- Modern Apple and Android smartphones, tablets, Macbooks and other devices: find screenshots for this purpose
In the info sheets of VE.Direct Bluetooth Smart dongle and the MPPT app.
Battery voltage: 12 / 24V automatic selection
Nominal charging current: 10A
Nominal PV power, 12 V 1a, b): 145W
Nominal PV power, 24 V 1a, b): 290W
Max. PV short-circuit current 2): 10A
Automatic load disconnect Yes, maximum load 15A
Maximum PV open voltage: 75V
Peak efficiency: 98%
Power consumption: 12V: 24V 20 mA: 10 mA
"Constant" -Ladespannung (absorption): 14.4V / 28.8V (adjustable)
"Conservation" -Ladespannung (float): 13.8V / 27.6V (adjustable)
Charging algorithm: multi-level, adaptive
Temperature Compensation: -16 mV / ° C and -32 mV / ° C
Uninterrupted / peak load current: 15A / 50A
Switching off the load at a low voltage: 11.1V / 22,2V or 11.8V / or 23,6V Battery Life algorithm
Reconnecting the load to a low voltage: 13,1V / 26,2V or 14V / 28V or Battery Life algorithm
Protection: Battery reverse polarity (fuse) Output short circuit / overheating
Operating Temperature: -30 ° C to + 60 ° C (full rated output up to 40 ° C)
Humidity: 95% non-condensing
Data communication port: VE.Direct
Connections: 6mm² / AWG10
Protection: IP43 (electronic components), IP22 (connection region
Weight: 0.5kg
Dimensions (HxWxD): 100 x 113 x 40mm
1a) If more PV power is connected, the controller limits the input power.
1b) The PV voltage must at least the height of Vbat + reach 5V, so that the controller operation Tapes. After that, the minimum value of the PV voltage at Vbat + 1V.
2) A PV system with a higher short-circuit current can damage the controller.