-
Power Supply
- Batteries
- Battery Management
- Battery Chargers
- Solar Power
- Wind Generators
- Charging Current Distribution
- Voltage Converters
- Inverter/Charger Combinations
- Conductors and Installation
- Devices and Consumers
- Boat Accessories
- New Products
€1,532.40*
% €1,802.85* (15% saved vs. recommended price)will be ordered for you
Lead time: 7 days (according to manufacturer**),
est. total delivery time: 1-2 weeks
Product number:
1759401
EAN:
8719076023951
Manufacturer product ID:
PMP123021010
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "Victron - Multiplus 12/3000/120-50 - 230V"
The Multiplus is a powerful inverter with a pure sinus wave, an advanced battery loader that uses adaptive charging technology, and a high-speed change voltage transfer switch in a single compact housing. Apart from these primary functions, the Multiplus also offers several extended functions, which are explained below.
Two alternating current outputs: The main exit ensures uninterrupted operation. In the event of a network failure or if the land/generator current is interrupted, the Multiplus takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if there is an alternating current available on one of the inputs of the Multiplus AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output (a second output is only available for models with an output power of 3000 VA and more).
Practically unlimited performance through parallel circuit: up to six multis can be switched in parallel with high power requirements.
Three phase operation: Apart from the parallel connection, three units of the same model can also be configured for a three-phase output.
PowerControl: Working with limited generator performance, limited land or network current. With the remote control panel Multi Control, the maximum network or generator current can be set. The Multiplus then takes into account other connected alternating current consumers and only uses the electricity that is still "left". This prevents the generator or the land power connection from being overloaded.
Power Assist: With this function, the PowerControl principle receives a new dimension. It enables the multiplus to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Multiplus ensures that too weak land electricity or generator output is immediately compensated for by energy from the battery. The load is reduced, i.e. H. If consumers are switched off, the energy that is then sufficiently existing can be used again to load the batteries.
Four-stage adaptive charger and loading of two batteries: The main output using the advanced "adaptive charging" software ensures that the battery system is powerful. Another fourth stage for long periods of time in conservation mode. Apart from that, the Multiplus also loads a second battery by using an independent maintenance load output (conservation load output only available from 12 V and 24 V models). If settings have to be changed, this can be changed within of a few minutes using the new DIP switch setting process.
Multi Plus - battery voltage 12 V 12/3000/120-50
- Power Control / Power Assist: Yes
- Transfer switch: 50 a
-Parallel circuit and three-phase operation: Javerwichter
- Input voltage area: 9.5–17 V (V DC)
- Exit: output voltage: 230 V AC ± 2%, frequency: 50 Hz ± 0.1%
- Kont. Output power at 25 ° C: 3000 VA **
- Kont. Output power. at 25 ° C: 2500 W
- Kont. Output power. at 40 ° C: 2200 W
- Top performance: 6000 W
- Max. Effect: 93 %
- Zero-load performance: 15 W
-Zero-load performance in AES mode: 10W
-Zero-load performance in search mode: 4 wladitor
-AC input: Input voltage area: 187-265VAC, input frequency: 45–65 Hz / performance factor: 1
- Constant charging voltage: 14.4 V DC
- Conservation charging voltage: 13.8 V DC
- Storage mode: 13.2 V DC
- charging current house battery: 120 a
-Charging current Starter battery: 4 Abatter Temperature Sensor: Yes
- General
- Additional outcome (A): Yes (16 a)
- Programmable relay: relay adjustable and a. As an alarm relay or start / stop function for an aggregate
-Protection: output ceiling, overload, battery overvoltage, battery sub voltage, over temperature, 230 V AC at the inverter output, too high humming voltage at the input
- Ve. Bus interface: for parallel circuits and three-phase operation, remote monitoring and system integration
- Com port for general use: on request
- Common features: operating temperature range: -20 to +50 ° C (blower testing), protection class: IP21
-Battery connection: Four M8 bolts (2+ / 2-)
- 230 V AC connection: screw terminals 13 mm²
- Weight: 18 kg
- Dimensions (HXBXT): 362 x 258 x 218 mm ** Nonlinear load, top factor 3: 1
Two alternating current outputs: The main exit ensures uninterrupted operation. In the event of a network failure or if the land/generator current is interrupted, the Multiplus takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if there is an alternating current available on one of the inputs of the Multiplus AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output (a second output is only available for models with an output power of 3000 VA and more).
Practically unlimited performance through parallel circuit: up to six multis can be switched in parallel with high power requirements.
Three phase operation: Apart from the parallel connection, three units of the same model can also be configured for a three-phase output.
PowerControl: Working with limited generator performance, limited land or network current. With the remote control panel Multi Control, the maximum network or generator current can be set. The Multiplus then takes into account other connected alternating current consumers and only uses the electricity that is still "left". This prevents the generator or the land power connection from being overloaded.
Power Assist: With this function, the PowerControl principle receives a new dimension. It enables the multiplus to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Multiplus ensures that too weak land electricity or generator output is immediately compensated for by energy from the battery. The load is reduced, i.e. H. If consumers are switched off, the energy that is then sufficiently existing can be used again to load the batteries.
Four-stage adaptive charger and loading of two batteries: The main output using the advanced "adaptive charging" software ensures that the battery system is powerful. Another fourth stage for long periods of time in conservation mode. Apart from that, the Multiplus also loads a second battery by using an independent maintenance load output (conservation load output only available from 12 V and 24 V models). If settings have to be changed, this can be changed within of a few minutes using the new DIP switch setting process.
Multi Plus - battery voltage 12 V 12/3000/120-50
- Power Control / Power Assist: Yes
- Transfer switch: 50 a
-Parallel circuit and three-phase operation: Javerwichter
- Input voltage area: 9.5–17 V (V DC)
- Exit: output voltage: 230 V AC ± 2%, frequency: 50 Hz ± 0.1%
- Kont. Output power at 25 ° C: 3000 VA **
- Kont. Output power. at 25 ° C: 2500 W
- Kont. Output power. at 40 ° C: 2200 W
- Top performance: 6000 W
- Max. Effect: 93 %
- Zero-load performance: 15 W
-Zero-load performance in AES mode: 10W
-Zero-load performance in search mode: 4 wladitor
-AC input: Input voltage area: 187-265VAC, input frequency: 45–65 Hz / performance factor: 1
- Constant charging voltage: 14.4 V DC
- Conservation charging voltage: 13.8 V DC
- Storage mode: 13.2 V DC
- charging current house battery: 120 a
-Charging current Starter battery: 4 Abatter Temperature Sensor: Yes
- General
- Additional outcome (A): Yes (16 a)
- Programmable relay: relay adjustable and a. As an alarm relay or start / stop function for an aggregate
-Protection: output ceiling, overload, battery overvoltage, battery sub voltage, over temperature, 230 V AC at the inverter output, too high humming voltage at the input
- Ve. Bus interface: for parallel circuits and three-phase operation, remote monitoring and system integration
- Com port for general use: on request
- Common features: operating temperature range: -20 to +50 ° C (blower testing), protection class: IP21
-Battery connection: Four M8 bolts (2+ / 2-)
- 230 V AC connection: screw terminals 13 mm²
- Weight: 18 kg
- Dimensions (HXBXT): 362 x 258 x 218 mm ** Nonlinear load, top factor 3: 1