- Power Supply
- Conductors and Installation
- Devices and Consumers
- Boat Accessories
- New Products
€447.90*
% €527.17* (15.04% saved vs. recommended price)will be ordered for you
Lead time: 7 days (according to manufacturer**),
est. total delivery time: 1-2 weeks
Product number:
1973003
EAN:
8719076050322
Manufacturer product ID:
SCC115070411
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "Victron - Smartsolar Mppt 150/70 -True Ve.can"
Ultra fast Maximum Power Point Tracking (MPPT)
Especially in overcast sky, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield as compared to PWM charge controllers by up to 30% and in comparison to slower MPPT controllers by up to 10%.
Advanced maximum power point detection in partial shade.
In case of partial shading of maximum power (MPP) may be present on the current-voltage curve two or more points.
Conventional MPPTs tend to adapt to a local MPP. However, this might not be the optimum MPP.
The innovative algorithm of the smart solar device always maximize the energy yield by adjusts to the optimum MPP.
outstanding efficiency
No cooling fan. Maximum efficiency at over 98%.
Flexible charging algorithms
Fully programmable charging algorithm and eight pre-programmed algorithms that can be selected via a rotary knob (for further details, see the manual).
Comprehensive electronic protection
Overheating protection and power derating at high temperatures.
Protection against PV short circuit and PV reverse polarity.
PV reverse current protection.
Internal temperature sensor
Compensates constant and trickle charging voltages to temperature from.
Built-in Bluetooth Smart: No dongle needed
The wireless solution for set-up, monitoring and updating of the controller using Apple and Android smart phones, tablets or other devices.
VE.Direct
For a wired data connection with a Color Control panel, Venus GX, PC or other devices.
Remote-controlled on / off circuit
For example, to connect to a VE.Bus BMS
programmable relay
Can be programmed (u. A. With a smartphone) to trigger an alarm or other events.
Optional: pluggable LCD display
Simply remove the rubber seal that protects the connector on the front of the controller and plug in the display.
Battery voltage: 12/24 / 48V Auto Select (software tool needed to select 36 V)
Nominal charging current: 70 A
Nominal PV power, 12 V 1a, b): 1000 W
Nominal PV power, 24 V 1a, b): 2000 W
Nominal PV power, 36 V 1a, b): 3000 W
Nominal PV power, 48 V 1a, b): 4000 W
Max. Short-circuit current of the solar system 2): 50 A
Maximum PV open voltage: 150V absolute maximum coldest conditions / 145 V maximum for power-up and operation
Max. Efficiency: 98%
Power consumption: Less than 35 mA @ 12 V / @ 48 V 20 mA
"Constant" -Ladespannung (absorption): default settings: 14.4 / 28.8 / 57.6 V (adapted with: knob, display, VE.Direct or Bluetooth)
"Maintenance" -Ladespannung: default settings: 13.8 / 27.6 / 41.4 / 55.2 V (customizable: knob, display, VE.Direct or Bluetooth)
Compensation charging voltage: default settings: 16.2 V / V 32.4 / 48.6 V / 64.8 V (regulated)
Charging algorithm: multi-stage adaptive (eight pre-programmed algorithms) or user-defined algorithm
Temperature compensation: -16 mV / -32 mV / -64 mV / ° C
Protection: reverse polarity of battery (backup, no access by the user) / PV reverse polarity / output short-circuit / temperature
Operating Temperature: -30 ° C to +60 ° C (full rated output up to 40 ° C)
Humidity: 95% non-condensing
Maximum height: 5000 m (full rated output m to 2000)
Environmental conditions: for indoor use without special conditions
Pollution degree PD3
Data communication port: VE.Direct or Bluetooth
Remote-controlled on / off circuit: Yes (2-pin plug)
Programmable Relay: DPST AC nominal value: 240 VAC / 4 A DC / nominal value: 4 A up to 35 VDC, 60 VDC up to 1 A
Parallel operation: Yes (not synchronized)
Color: Blue (RAL 5012)
PV terminals: 35 mm² / AWG2
Battery Terminals: 35 mm² / AWG2
Protection: IP43 (electronic components), IP22 (connection area)
Weight: 3 kg
Dimensions (H x W x D): 185 x 250 x 95 mm
1a) If more PV power is connected, the controller limits the input power
1b) The PV voltage must reach at least the height of Vbat + 5 V, so that the controller receives the operation. After that, the minimum value of the PV voltage at Vbat + 1 V. is
2) A higher short-circuit current can damage the regulator in the event of a reverse polarity connection of the PV system.
Especially in overcast sky, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield as compared to PWM charge controllers by up to 30% and in comparison to slower MPPT controllers by up to 10%.
Advanced maximum power point detection in partial shade.
In case of partial shading of maximum power (MPP) may be present on the current-voltage curve two or more points.
Conventional MPPTs tend to adapt to a local MPP. However, this might not be the optimum MPP.
The innovative algorithm of the smart solar device always maximize the energy yield by adjusts to the optimum MPP.
outstanding efficiency
No cooling fan. Maximum efficiency at over 98%.
Flexible charging algorithms
Fully programmable charging algorithm and eight pre-programmed algorithms that can be selected via a rotary knob (for further details, see the manual).
Comprehensive electronic protection
Overheating protection and power derating at high temperatures.
Protection against PV short circuit and PV reverse polarity.
PV reverse current protection.
Internal temperature sensor
Compensates constant and trickle charging voltages to temperature from.
Built-in Bluetooth Smart: No dongle needed
The wireless solution for set-up, monitoring and updating of the controller using Apple and Android smart phones, tablets or other devices.
VE.Direct
For a wired data connection with a Color Control panel, Venus GX, PC or other devices.
Remote-controlled on / off circuit
For example, to connect to a VE.Bus BMS
programmable relay
Can be programmed (u. A. With a smartphone) to trigger an alarm or other events.
Optional: pluggable LCD display
Simply remove the rubber seal that protects the connector on the front of the controller and plug in the display.
Battery voltage: 12/24 / 48V Auto Select (software tool needed to select 36 V)
Nominal charging current: 70 A
Nominal PV power, 12 V 1a, b): 1000 W
Nominal PV power, 24 V 1a, b): 2000 W
Nominal PV power, 36 V 1a, b): 3000 W
Nominal PV power, 48 V 1a, b): 4000 W
Max. Short-circuit current of the solar system 2): 50 A
Maximum PV open voltage: 150V absolute maximum coldest conditions / 145 V maximum for power-up and operation
Max. Efficiency: 98%
Power consumption: Less than 35 mA @ 12 V / @ 48 V 20 mA
"Constant" -Ladespannung (absorption): default settings: 14.4 / 28.8 / 57.6 V (adapted with: knob, display, VE.Direct or Bluetooth)
"Maintenance" -Ladespannung: default settings: 13.8 / 27.6 / 41.4 / 55.2 V (customizable: knob, display, VE.Direct or Bluetooth)
Compensation charging voltage: default settings: 16.2 V / V 32.4 / 48.6 V / 64.8 V (regulated)
Charging algorithm: multi-stage adaptive (eight pre-programmed algorithms) or user-defined algorithm
Temperature compensation: -16 mV / -32 mV / -64 mV / ° C
Protection: reverse polarity of battery (backup, no access by the user) / PV reverse polarity / output short-circuit / temperature
Operating Temperature: -30 ° C to +60 ° C (full rated output up to 40 ° C)
Humidity: 95% non-condensing
Maximum height: 5000 m (full rated output m to 2000)
Environmental conditions: for indoor use without special conditions
Pollution degree PD3
Data communication port: VE.Direct or Bluetooth
Remote-controlled on / off circuit: Yes (2-pin plug)
Programmable Relay: DPST AC nominal value: 240 VAC / 4 A DC / nominal value: 4 A up to 35 VDC, 60 VDC up to 1 A
Parallel operation: Yes (not synchronized)
Color: Blue (RAL 5012)
PV terminals: 35 mm² / AWG2
Battery Terminals: 35 mm² / AWG2
Protection: IP43 (electronic components), IP22 (connection area)
Weight: 3 kg
Dimensions (H x W x D): 185 x 250 x 95 mm
1a) If more PV power is connected, the controller limits the input power
1b) The PV voltage must reach at least the height of Vbat + 5 V, so that the controller receives the operation. After that, the minimum value of the PV voltage at Vbat + 1 V. is
2) A higher short-circuit current can damage the regulator in the event of a reverse polarity connection of the PV system.