Victron - Bluesolar Mppt 100/50

Ultra fast Maximum Power Point Tracking (MPPT)
Especially in overcast sky, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield as compared to PWM charge controllers by up to 30% and in comparison to slower MPPT controllers by up to 10%.

Advanced maximum power point detection in partial shade.
In case of partial shading of maximum power (MPP) may be present on the current-voltage curve two or more points.
Conventional MPPTs tend to adapt to a local MPP.
However, this might not be the optimum MPP.
The innovative algorithm of BlueSolar device always maximize the energy yield by adjusts to the optimum MPP.

outstanding efficiency
No cooling fan. Maximum efficiency at over 98%. Full output power up to 40 ° C (104 ° F).

Flexible charging algorithms
Fully programmable charging algorithm (also refer to the software side of the Victron Energy website) and eight pre-programmed algorithms that can be selected via a rotary knob (for further details, see the manual).

Comprehensive electronic protection
Overheating protection and power derating at high temperatures.
Protection against PV short circuit and PV reverse polarity.
PV reverse current protection.

Internal temperature sensor
Compensates constant and trickle charging voltages to temperature from.

Options for displaying data in real time
- Apple and Android smartphones, tablets and other devices: note the VE.Direct to Bluetooth Smart Dongle
- Color Control Panel


Battery voltage: 12/24 V automatic selection
Nominal charging current: 50A
Rated PV power, 12V 1a, b): 700W
Nominal PV power, 24 V 1a, b): 1400W
Maximum PV open voltage: 100V
Max PV short-circuit current 2):. 60A
Peak efficiency: 98%
Power consumption 12V: 30 mA 24 V: 20 mA
"Constant" -Ladespannung (absorption) Standard settings: 14.4 V / 28.8 V (regulated)
"Maintenance" -Ladespannung (float) Standard settings: 13.8 V / 27.6 V (regulated)
Charging algorithm: multi-level, adaptive
Temperature Compensation: -16 mV / ° C and -32 mV / ° C
Protection: reverse polarity of battery (backup, no access by the user), PV reverse polarity, output short circuit, overheating
Operating Temperature: -30 ° C to + 60 ° C (full rated output up to 40 ° C)
Humidity: 95% non-condensing
Data communication port: VE.Direct
Connections: 13 mm² / AWG6
Protection: IP43 (electronic components), IP22 (connection area)
Weight: 1.3 kg
Dimensions (HxBxT): 130 x 186 x 70 mm

1a) If more PV power is connected, the controller limits the input power.
1b) The PV voltage must reach at least the height of Vbat + 5 V, so that the controller receives the operation. After that, the minimum value of the PV voltage at Vbat + 1 V. is
2) A PV system with a higher short-circuit current can damage the controller.