Duo controllers - for multiple battery groups

The Sunsa Dear Railer is equipped with full electronic protection, a PWM series control with 4 charging levels and self -diagnosis. It is the ideal charge controller for oil and gas applications, telecommunications, instrumentation, naval applications and boats, as well as solar home systems. Also designed for adverse environmental conditions and simple installation, the Sunsaver with its robust design is the ideal and reliable charge controller for industry.Product characteristics :: Charge of two batteries, the solar chary current is divided into the two batteries based on the priorities selected by the user. If one of the batteries is fully charged, the entire charging current flows to the other battery.: Provision of valuable information, the remote ado and the light -emitting diodes indicate data on the system status and any system errors. Due to the pictograms and the backlight, the display instrument is easy to read and understandable.: Lower costs, the simultaneous charge of two batteries eliminates the additional costs of two separate solar charging systems and the need for insulation between the batteries.: Simple installation, the controller becomes with the clearly marked large cable connections installed near the batteries. The remote display instrument can be installed on the wall in the wall or by means of the bracket contained in the scope of delivery. The cable for the display instrument including RJ-11 connectors are also included in the scope of delivery: longer battery life duration, the pulse-wide modulated 4-phase loading process and temperature compensation extend the lifespan of the batteries. Installation not damaged. No fuses do not have to be replaced and the controller is automatically reset after a cabling error. : High reliability, the epoxy capsule protects the controller against dust and high humidity. The powerful electronics and the gentle heated design enable the control of the controller at high temperatures. Five years of guarantee and valued lifespan of 15 years.Sunsaver duo 25a, 12VDCArticle No.: 321040Manufacturer: MorningstarProduct weight: 0.34 kgWeight including packaging: 1.00 kgDimensions: 170 x 56 x 41 mm (L x W x H)

-PWM controller zumAufladen separated from two batteries. For example: starter battery and service battery of a boat or a caravan-Programmierbares Ladestromverhaltnis (default: same amount of current for both batteries)-Ladespannungs setting for three battery types (gel, AGM, Flussigelektrolytbatterie)-Standardeinstellung: constant charge 14.4 V / V 28.8; Trickle charging 13.7 V / 27.4 V-Internal temperature sensor and optional remote temperature sensor.-Protection against overcurrentshort-circuit protection-Verpolungsschutz for solar panels and / or batteryDimensions (HxWxD): 76 x 153 x 37 mm

With triple MNL for loading the living room batteryArticle No.: 390467Manufacturer: without a logoProduct weight: 0.05 kgWeight including packaging: 0.05 kgDimensions: 0 x 0 x 0 mm (L x W x H)With triple MNL for loading the living room batteryArticle No.: 390467Manufacturer: without a logoProduct weight: 0.05 kgWeight including packaging: 0.05 kgDimensions: 0 x 0 x 0 mm (L x W x H)

Sunware FOX installer offers optimal loading efficiency and battery care: They increase the lifespan of the battery by protecting them from dangerous overload and gas development.Flexible technology: You can either connect up to 2 battery systems (only with FOX 320 and 360). A change is not necessary.Highest benefit: automatic battery care due to 14-day gas load and 3-stage charging characteristic.Optimal comfort: Fox loader is maintenance -free. After installation, your solar system works by itself.Security: Execerrated technology and intelligent functions offer maximum security for your solar system.The charge controllers FOX-220 and FOX-260 are ideal for one-battery systems, FOX-320 and FOX-360 for to two-battery systems. MD1 are connected. Fox-260/-360 have an integrated display.The FOX-220 is a solar loader for module flows up to 20 A, suitable for AGM, gel and lead acid batteries. Consumers can be connected up to a maximum of 20 A. The adaptive deep release protection monitors and protects the battery from harmful deep discharge, alternatively the night light function can be used. In combination with the Hardware PWM control, the optimized charging characteristic achieves a significantly faster and gentler load of the battery, dangerous gastung or overload are safely prevented. The controller recognizes the system voltage fully automatically. The active return flow lock guarantees the backstream protection and enables an extremely low voltage drop between the module and the battery. The three LEDs provide information about the charging status of the battery and signal whether a charging current flows or the relger reduces the charging current current (conservation load). The Multi Display FOX-MD1 can be shot at any time by simply infecting the FOX-220. The current tensions and currents can then be displayed and also shown graphically. With the programming function of the FOX-MD1, various parameters can be changed and saved.12/24v, 20a, over- and deeper charging protectionArticle No.: 320092Manufacturer: SunwareProduct weight: 0.30 kgWeight including packaging: 0.30 kgDimensions: 126 x 54 x 107 mm (L x W x H)

For FOX-220 and FOX-320Article No.: 320093Manufacturer: SunwareProduct weight: 0.15 kgWeight including packaging: 0.50 kgDimensions: 157 x 41 x 66 mm (L x W x H)For FOX-220 and FOX-320Article No.: 320093Manufacturer: SunwareProduct weight: 0.15 kgWeight including packaging: 0.50 kgDimensions: 157 x 41 x 66 mm (L x W x H)

The Steca PA LCD1 is a graphic remote display for the Steca Solarix 2020-X2 solar loader. All system information is clearly shown, the graphically designed energy flow is intuitive. The remote display has a full data logger with graphic display, which allows complete control of the overall system. With the help of the distance display, almost all loading control parameters can be set and changed. The distribution of the charging capacity between the two batteries can also be set. A complete programming of all automatic time and battery voltage functions is available for the load exit. A USB charging socket for smartphones and tablets is also available.Product characteristics: only in connection with the Steca Solarix 2020-X2, easy installation, maintenance-free, fully-fledged integrated data logger, maximum reliability, four freely programmable timers with weekday function, evening, night, morning light function, generator manager, surplus manager, automatic shutdown of More than a week,Graphical remote display for Solarix 2020-X2, 5m connecting cable, USB 0.5AArticle No.: 391128Manufacturer: StecaProduct weight: 0.40 kgWeight including packaging: 0.90 kgDimensions: 189 x 90 x 29 mm (L x W x H)

Sunware FOX installer offers optimal loading efficiency and battery care: They increase the lifespan of the battery by protecting them from dangerous overload and gas development.Flexible technology: You can either connect up to 2 battery systems (only with FOX 320 and 360). A change is not necessary.Highest benefit: automatic battery care due to 14-day gas load and 3-stage charging characteristic.Optimal comfort: Fox loader is maintenance -free. After installation, your solar system works by itself.Security: Execerrated technology and intelligent functions offer maximum security for your solar system.The charge controllers FOX-220 and FOX-260 are ideal for one-battery systems, FOX-320 and FOX-360 for to two-battery systems. MD1 are connected. Fox-260/-360 have an integrated display.The FOX-220 is a solar loader for module flows up to 20 A, suitable for AGM, gel and lead acid batteries. Consumers can be connected up to a maximum of 20 A. The adaptive deep release protection monitors and protects the battery from harmful deep discharge, alternatively the night light function can be used. In combination with the Hardware PWM control, the optimized charging characteristic achieves a significantly faster and gentler load of the battery, dangerous gastung or overload are safely prevented. The controller recognizes the system voltage fully automatically. The active return flow lock guarantees the backstream protection and enables an extremely low voltage drop between the module and the battery. The three LEDs provide information about the charging status of the battery and signal whether a charging current flows or the relger reduces the charging current current (conservation load). The Multi Display FOX-MD1 can be shot at any time by simply infecting the FOX-220. The current tensions and currents can then be displayed and also shown graphically. With the programming function of the FOX-MD1, various parameters can be changed and saved.For 2 battery systems, 12/24V, 20A, overload protection, LCD display, night light functionArticle No.: 321124Manufacturer: SunwareProduct weight: 0.30 kgWeight including packaging: 0.30 kgDimensions: 128.6 x 106.7 x 53.3 mm (L x W x H)

The Sunsa Dear Railer is equipped with full electronic protection, a PWM series control with 4 charging levels and self -diagnosis. It is the ideal charge controller for oil and gas applications, telecommunications, instrumentation, naval applications and boats, as well as solar home systems. Also designed for adverse environmental conditions and simple installation, the Sunsaver with its robust design is the ideal and reliable charge controller for industry.Product characteristics :: Charge of two batteries, the solar chary current is divided into the two batteries based on the priorities selected by the user. If one of the batteries is fully charged, the entire charging current flows to the other battery.: Provision of valuable information, the remote ado and the light -emitting diodes indicate data on the system status and any system errors. Due to the pictograms and the backlight, the display instrument is easy to read and understandable.: Lower costs, the simultaneous charge of two batteries eliminates the additional costs of two separate solar charging systems and the need for insulation between the batteries.: Simple installation, the controller becomes with the clearly marked large cable connections installed near the batteries. The remote display instrument can be installed on the wall in the wall or by means of the bracket contained in the scope of delivery. The cable for the display instrument including RJ-11 connectors are also included in the scope of delivery: longer battery life duration, the pulse-wide modulated 4-phase loading process and temperature compensation extend the lifespan of the batteries. Installation not damaged. No fuses do not have to be replaced and the controller is automatically reset after a cabling error. : High reliability, the epoxy capsule protects the controller against dust and high humidity. The powerful electronics and the gentle heated design enable the control of the controller at high temperatures. Five years of guarantee and valued lifespan of 15 years.Sunsaver duo 25a, 12VDC distance display (kit)Article No.: 321041Manufacturer: MorningstarProduct weight: 0.48 kgWeight including packaging: 1.05 kgDimensions: 170 x 56 x 41 mm (L x W x H)

This state-of-the-art two-battery loader is ideal for use in the leisure sector. It has a solar module input, which is suitable for all 36 or 24 V systems for all 72-cell, crystalline solar modules for 12 V systems. Both the main and the starter battery are permanently loaded and at the same time loaded by the solar module. 90 percent of the available service flow into the main battery, while the secondary battery is kept at the full charging level with 10 percent of the power.Product characteristics :: Series controller, automatic voltage adjustment, voltage and power control, PWM control, multi-stage loading technology, current-compensated load resolution, automatic load recovery, temperature compensation, negative grounding of several terminals possible, self-test function, monthly maintenance charging, USB load sector for smartphones and tablets,20a module current, 20A load current, 12/24V, charger for 2 batteries, USB 1.5A, LEDArticle No.: 321283Manufacturer: PhaesunProduct weight: 0.50 kgWeight including packaging: 0.80 kgDimensions: 190 x 120 x 57 mm (L x W x H)

The proven solar charge controller for EBL Schaudt are ideal for use in mobile homes for charging two batteries. 20 A 12 VDC, for 2 batteries, LEDPart No: 321004Manufacturer: plainProduct Weight: 0.16 kgWeight incl. Packaging: 0.16 kgDimensions: 110 x 75 x 56 mm (L x B x H)

The distance display is connected directly to a corresponding SHOLAR regulator. The solar power in the living room and starter battery is displayed via a red LED display.Features :: Display of the Solar Charging Current of the Living Room Or Starter Battery, PowannoUncement er-Saving: LED display only when information is retrieved, H: 106mm, B: 110mm, T: 35mm,12 VDC, 7 segment LED display, for LR and LRM 1218Article No.: 391164Manufacturer: without a logoProduct weight: 0.20 kgWeight including packaging: 0.85 kgDimensions: 106 x 110 x 35 mm (L x W x H)