Phocos - PWM controllers & accessories

The CX series offers exceptional in-class features:In addition to a PWM charge control with temperature compensationCX-controller with extensive control,Programming and safety functions equipped.The state of charge of the battery is a bar graphpermanently displayed as the energy flows to and from the batteryas well as the load state (z. B. overload, load short-circuit).The discharge can be set in five ways:two fixed voltages, two charge states or adaptive(To preserve the batteries). CX controllers are equipped with acousticWarning functions and a programmable night light function.The compact housing can optionally (CX-DR) on aDIN rail mounted.Product features: Data Logger (1 year) for system analysis,Warning against load sheddingLCD display: battery level and charge current,5 load disconnect algorithms,Temperature-compensated three-stage PWM charging control (series regulator),Automatic 12/24 volt detection,Suitable for DIN rail mounting,Optional external temperature sensor CXNT,Optional remote display CXM,Optional PC interface and software CXI CXCOM, Module 20 A, load, 12/24 VDC, captive 4 mA, LCD, IP20,Grounding (negative), charger for batteries 2, screw 16 mm²,programmable data logger (MXI / CXLink)Manufacturer: PhocosProduct Weight: 0.17 kgWeight incl. Packaging: 0.30 kgDimensions: 103 x 101 x 32 mm (LxWxH)

The CXNUP series offers extraordinary properties in its class: In addition to a PWM loading regulation with temperature compensation, CXUP controllers are equipped with extensive control, programming and security functions. The charging status of the battery is permanently displayed via a bar display, as well as the energy flows and the battery and the load condition (e.g. overload, load shortage). The deep discharge protection can be set in five species: via two fixed tension, two charging states or adaptive (for battery recovery). CXUP controls have acoustic warning functions and a programmable night light function.Product characteristics: data logger (2 years) for system analysis, warning tone of load shutdown, LCD display: battery charging status and charging current, 5 load shutdown algorithms, temperature-compensated three-stage PWM loading (standard regulator), automatic 12/24-volt detection, positive grounding.- USB connection- PC software CXLINK10 a module current, 10 a load, 12/24vdc, LCD, IP20, screw clamp, programmable, USB 1500 MAArticle No.: 321669Manufacturer: PhocosProduct weight: 0.18 kgWeight including packaging: 0.2 kgDimensions: 101 x 103 x 32 mm (L x W x H)

In the case of PV island systems that are exposed to extreme weather and ambient conditions (e.g. street lighting or navigation buoy), there is an increased risk of default in power electronics. In order to ensure reliable battery protection under these conditions, Phocos developed the fully filled loader CIS. The CIS industrial district regulator fulfills the protection class IP68 and is suitable for all PV applications. The controller offers a four-stage PWM charging process, deep discharge protection and flexible load-timer functions. A multi-LED display provides information about the system status. The CIS loader is available in two versions: Version Singleload with Dimm output (CIS): The CIS has a load exit and a control output for dimmable lamp operating devices. Version dualload with two load outputs (CIS-2L): The CIS-2L has two load outputs to control two loads independently. There are no moving parts, switches or buttons on the CIS. Battery type, depth load limits, timer and other configuration values are set via the infrared remote control. The cable connections of the CIS avoid the problems that are otherwise frequently occurring at high moisture and adverse environmental conditions (dust, water, vermin, chemicals, shock). The extremely compact aluminum housing enables the CIS to assemble within street lighting masts.Equipment: optionally with a load exit and dimmm control output (CIS) or with two load outputs (CIS-2L), full capsaturned, circuit braided in epoxy resin (IP68), compact size, programmable via infrared remote control (CIS-CU), Timer functions for lighting control, four-stage PWM charging process with temperature compensation, (main, conservation, boost and equalization load), automatic system voltage detection (12/24 V),20a module current, 1050mA LED electricity, 12/24VDC, LED, motion detector input, IP68Article No.: 321406Manufacturer: PhocosProduct weight: 0.25 kgWeight including packaging: 0.26 kgDimensions: 92 x 99 x 22 mm (L x W x H)

Control Unit Cu for CIS Design ReceivesArticle No.: 320008Manufacturer: PhocosProduct weight: 0.15 kgWeight including packaging: 0.15 kgDimensions: 70 x 135 x 24 mm (L x W x H)Control Unit Cu for CIS Design ReceivesArticle No.: 320008Manufacturer: PhocosProduct weight: 0.15 kgWeight including packaging: 0.15 kgDimensions: 70 x 135 x 24 mm (L x W x H)

Solar controllers protect against over and unloading.The controllers "control" the entire solar system fully automatically.Thanks to colored control LED, you are always informed about the operating state.- Performance: 8 A approx. 540 Wh/day- System voltage: 12/24 V- Display: LED- USB loading connectionDimensions (WXHXT): 80 x 100 x 32 mm