Sockeladapter

Thermoplastik, Zubehör von Elios Lampenfassung

Thermoplastik, rund

für E27 Schraubgewinde

zur Aufputzmontage, Farbe weiß

70 cm cable, E27 screw frame, center contact: plus (brown), thread: minus (blue)Article No.: 107219Manufacturer: without a logoProduct weight: 0.10 kgWeight including packaging: 0.10 kgDimensions: 0 x 0 x 0 mm (L x W x H)70 cm cable, E27 screw frame, center contact: plus (brown), thread: minus (blue)Article No.: 107219Manufacturer: without a logoProduct weight: 0.10 kgWeight including packaging: 0.10 kgDimensions: 0 x 0 x 0 mm (L x W x H)

Adapter holder G4-gy6.35 on E27 for LED lamps. Caution only use Niederspannug 10-30V!These adapters permit the use of LED or halogen Leuchitteln with G4 / GU4 base in all lights with 27 mm screw socket.You can thus, depending on requirements and cylindrical Leuchittel with wide viewing angle or spots in your existing luminaires use.Color: white / silverSocket (standard designation): G4 / GU5.3 / GY6.35Socket type (standard designation) E27Dimensions: Ø 18.5 mm x 32.5 mmWeight bulk: 5 gScope: 10 - 30 V low-voltage, LED lampsWe expressly point out that navigation lights lose the authorization for use of this base with corresponding Leuchitteln. The base may therefore only for decorative purposes and are not used for operation on maritime and inland waterways!

Adapter holder G4-gy6.35 on E14 for LED lamps. Caution only use Niederspannug 10-30V!These adapters allow the use of LED or halogen Leuchitteln with G4 / GU4 base in all lights with 14mm screw mount.You can thus, depending on requirements and cylindrical Leuchittel with wide viewing angle or spots in your existing luminaires use.Color: white / silverSocket (standard designation): G4 / GU5.3 / GY6.35Socket type (standard designation) E14Weight bulk: 5 gScope: 10 - 30 V low-voltage, LED lampsWe expressly point out that navigation lights lose the authorization for use of this base with corresponding Leuchitteln. The base may therefore only for decorative purposes and are not used for operation on maritime and inland waterways!

Adapter version G4-GY6.35 on Socket Bay15D for LED lampsThis adapter has two contacts for the power supply below, the pins on the side are at different heights.These adapters enable the use of LED or halogen containers with G4/GU4 base in all lights with a 15 mm bayonet frame.Depending on the requirement, you can also use cylindrical lamps with a large beam angle or spots in your existing lights.Color: white/silverVersal type (standard designation): G4/ GU5.3/ GY6.35Base type (standard designation): Bay15D (Fig. 3, left)Dimensions: Ø 17 mm x 29 mmWeight Bulk: 8 gArea of application: 10 - 30 V Niedervolt, LED lampsWe expressly point out that position lanterns lose approval when using this base with corresponding lamps. The base may therefore only be used for decorative purposes and not for operation on sea and inland navigation streets!This article can only be used for the naval naval.Use as a lamp in motor vehicles is not permitted and permissible.

Adapter version G4-GY6.35 on base BA15D for LED lampsThis adapter has two contacts for the power supply below, the pins on the side are both at the same height.These adapters enable the use of LED or halogen lamps with G4/GU4 base in all lights with a 15 mm bayonet frame.Depending on the requirement, you can also use cylindrical lamps with a large beam angle or spots in your existing lights.Color: white/silverVersal type (standard designation): G4/ GU5.3/ GY6.35Base type (standard designation): BA15D (in Figure 3 in the middle)Dimensions: Ø 17 mm x 29 mmWeight Bulk: 8 gArea of application: 10 - 30 V Niedervolt, LED lampsScope of delivery: 1 adapterThis article can only be used for the naval area.The usual use of this BA15D is a single -down lamp with potential -free base (e.g. anchor light in boats or in the vehicle interior). The BA15D cannot be used as a replacement for a doubt lamp (brake and bottom).Use as a lamp in motor vehicles is not permitted and permissible.

Adapter version G4-GY6.35 on base BA15S for LED lampsThis adapter has a contacts for the power supply below, the pins on the side are both at the same height.These adapters enable the use of LED or halogen lamps with G4/GU4 base in all lights with a 15 mm bayonet frame.Depending on the requirement, you can also use cylindrical lamps with a large beam angle or spots in your existing lights.Color: white/silverVersal type (standard designation): G4/ GU5.3/ GY6.35Base type (standard designation): BA15S (in picture 3 whole right)Dimensions: Ø 17 mm x 29 mmWeight Bulk: 8 gArea of application: 10 - 30 V Niedervolt, LED lampsThis article can only be used for the naval area.Use as a lamp in motor vehicles is not permitted and permissible.