Batteriemanagement und -überwachung an Bord

Geliefert wird 1 Stück Kontaktbrücke.Passend für Anschluss-Klemmschienen von Blue Sea24022404240624082410

Battery management shunt 300AType SHX 300 with M12 connectorSimilar to picture.

The delivery takes place including Shunt She 300The BLS battery monitor is a compact battery monitoring for battery systems consisting of a 12 V starter battery and one or more 12 V consumer battery (s).The 2.4 “TFT Touch screen shows all important data of the entire battery system at a glance without having to operate a button.The built -in brightness sensor automatically dims the screen in the dark and saves valuable energy.• Display of the current voltage, the current charging or discharge current, the remaining remaining time, the battery temperature and the loading status of the consumer battery (s).• Further information on the use of the consumer battery (s): Number of charging cycles, deep discharges and the medium discharge depth.• Warning of a dangerous deep discharge through an adjustable acoustic alarm.• Suitable for all battery types such as acid, gel, AGM and LIFEPO4easy installationThe connection between the monitor and the shunt consists of a single line, an existing line can also be used.Easy commissioningOnly the battery capacity of the consumer battery has to be entered and the system is ready for use.Easy handlingBecause all relevant information is summarized on one page, no button has to be pressed. The important information is presented in an understandable manner and enable the quick reading.Technical specificationsNominal voltage 12 VElectricity recording max. 50 MA @ 12V, stand-by: 6 mADimensions W 105 x H 75 x D 35 mmInstallation section 87 x 65 mmElectricity resilience Shunt 300A, 600 A 1min, 1500 A 0.5 sExpand the BLS monitor by connecting a charger of the ACE series to a full battery charging management systemThe interface ACE-LIN interface integrated in the automatic loader enables the BLS battery monitor to monitor and control the charging process of the ACE ACE automatic loader to optimize the load.The AC network voltage, the loading phase, the battery temperature, the charging voltage and the charging current can also be read on the display.The charging capacity can be reduced at the push of a button or the silent mode (fan-off) can be activated. For further charging monitoring, a temperature alarm can be defined, for example.

The Leakage Current Monitor is a simple way of galvanic error currents.

M12 (NMEA2000) extension cable 0.5m

AC interface in the top-hat rail for the P-BUS for measuring an AC-phase 230 V / 50 Hz.The AC interface CAV provides the following information available:- AC electrical system voltage V and AC electrical system current A- Used kilowatt hours in kWh since the last resetIn combination with an AC switching LAU possible AC power supplies are in addition, the current voltage and the active source displayed.- The electrical connection is made via screw terminals.- Following the P bus that over a one M12-T cable is included.- current measuring range (int shunt.) 16 A, 100 A (external transducer WAC)- Dimensions L 76 x W 53 x H 46 mmAVAILABLE FROM 2ND QUARTER 2017

Digital - mini - installation voltmeter, suitable for 12 and 24 volts systems.Front water -protected, IP66.Installation opening Ø 29 mm,Also uncomplicated to install existing 12 V sockets instead of already existing.Input voltage 8 - 36 V DCDisplay resolution 0.01 VAdvancement +/- 1.0 %Electricity intake 15 MA

M12 (NMEA 2000) T-piece

Contact bridge suitable for Blus Sea260226042606260826101 piece of contact bridge is delivered.

Digital battery Management Shunt for installation in the minus line of the consumer battery.The Shunt She 348 is compatible with the monitor BTM2, BLM2 and BLS.The SHUTS power is supplied via the voltage measurement line of the consumer battery.Suitable for permanent charging or discharge flows up to 300 A and battery capacities up to 1000 AH.The active Shunt She 348 captures all loading and consumer flows directly on the shunt and, with the inclusion of the tension, calculates the current charging status of the battery.• High measuring accuracy of 10 mA• Large measuring range from 0.01 a to 1500 a• Automatic battery recognition• determination of the state of charge• Measurement of the battery temperature of the consumer battery via the optional temperature sensor "Temp-BT"• Tension measurement of a second battery group (starter battery)Electricity load capacity 300A, 600 A 1min, 1500 A 0.5 sElectricity recording 10 MA@12 V, 5 MA@24 VOperating voltage DC 8-40 VMeasure area 10 MA - 1500 aConnection bolt M8Dimensions L 118 x W 40 x H 65 mm

Temperature sensor, suitable for many Victron combination devices and chargers, e.g. Quattro, Multiplus, Phoenix, etc.

With its built-in Bluetooth, the BMV Smart is ready for the age of the "Internet of Things" (IdD).Most other Victron Energy products have also via Bluetooth. The wireless communication between the products, simplifying the installation of systems and improvesPower.Download the app Victron Bluetooth enabled Bluetooth with a smartphone or other device down.Using the app you can on your BMV-712 access and the mobile device:- Customize settings- display all important data on a screen,display historical data and -- upgrade to the latest software as new features become available.easy installationAll electrical connections are made with the circuit board connector on the current shunt.The shunt is connected to the guard via a standard RJ12 telephone cable.Included: RJ 12 cable (10 m) and the battery cable with fuse (2 m); There are no additional components required.In addition, a separate front bezel for square or round display; a security ring included for rear mounting and screws for front mounting.Monitoring the midpoint voltageA damaged cell or a damaged battery can destroy a whole big, expensive battery bank.If batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage.Please also note the BMV Manual, Section 5.2 for more information.We recommend that our Battery Balancer (BMS012201000) in order to maximize the service life of series lead-acid batteries.Very low power consumption from the batteryPower consumption: 0.7 Ah per month (1 mA) at 12 V and 0.6 Ah per month (0.8 mA) at 24 VIn particular, lithium-ion batteries have almost no capacity when discharged to shutdown due to low voltage desired.After switching off due to low voltage, the reserve capacity of a lithium-ion battery is about 1 per 1,000 Ah Ah battery capacity.The battery will be damaged if the remaining reserve capacity is taken from the battery.A residual current of 10 mA, for example, may damage a 200 Ah battery, when the system is left to stand for 8 days in a discharged state.Bistable alarm relaysPrevent an increased current consumption in the event of an alarm.Other features- battery voltage, current, power, consumed ampere hours and charging status- remaining time at current discharge- Programmable visual and audible alarm- Programmable relay to minor loads off or turn on a generator as needed.- A 500 ampere quick-connect shunt and a connection set.- shunt capacitance of up to 10,000 amperes selectable.- VE.Direct communication port- Saves a wide range of historical data can be evaluated on the basis of those usage patterns and battery condition.- Wide input voltage range: 6.5 - 70V- High current measurement resolution 10 mA (0.01 A)- Additional input for measuring voltage (a second battery), temperature or midpoint voltage and associated alarm and relay settings.Power supply voltage range from 6.5 to 70 VDCCurrent consumption; backlight <1mARange of input voltage, the auxiliary battery from 6.5 to 70 VDCBattery capacity (Ah) 1-9999 AhOperating temperature -40 + 50 ° C (-40 - 120 ° F)Measuring voltage of a second battery temperature or center YesTemperature range -20 + 50 ° CVE.Direct communication port YesBistable relay 60 V / 1 A normally open (function can be reversed)DISSOLUTION & accuracy (with a 500 A shunt):Current ± 0.01AVoltage ± 0.01 VAh ampere-hours ± 0.1Charge state (0 - 100%) ± 0.1%Remaining time ± 1 minTemperature (0 - 50 ° C or 30-120 ° F) ± 1 ° C / ° FCurrent measurement accuracy ± 0.4%Voltage measurement accuracy ± 0.3%INSTALLATION & DIMENSIONS:Installation flat mountingFront 63mm diameterFront panel 69 x 69mm (2.7 x 2.7 inches)Diameter casing 52 mm (2.0 inches)Deep casing 31 mm (1.2 inches)Shunt (supplied) 500 A / 50 mVCable (supplied) 10 meters 6 wire UTP cable with RJ12 connectors, and cables with fuse for the '+' connection

Connection cable length 2m

Temp-BT temperature sensor - Cable length 2,8mTemperature sensor for EM-box for battery management ShuntSHC and temperature monitor TPMType Temp-BT

A useful article from the group NAVIGATION

Mit diesem Konverter können Zigbee-Daten in ein USB-Signal umgewandelt werden. Er bietet eine einfache Lösung zur Verbindung von Zigbee-basierten Geräten mit Computern oder anderen USB-fähigen Geräten.Technische Daten:- Schnittstelle: Zigbee zu USB- Kabellänge: 1,5 m

With Ethernet connection.A maximum of 65a/phase.

M12-4T-Stück (4 fach)

P-Bus System Monitor for display, control and monitoring of all data.The PSL system is the size of the PSM 2 size and is equipped with a 5 ”color touchscreen.It provides information on all available data on various pages.A connection to an NMEA 2000 network can be established with the CBN component to be acquired. This network bridge translates the P-Bus data into the NMEA2000 network (if it supports the plotter software).- 5 “Voll colored graphics display with touchscreen-An M12-T cable and the two P-Bus Terminators (final resistance) are included in the scope of delivery- Operating voltage 8 - 32 V DC- Electricity recording max. 200 MA- Dimensions B 157.5 x H 105 x D 35 mm- Installation section B 120 x H 80 mmAvailable from the 3rd quarter of 2017

The intelligent battery shuntThe Smart Hunt is an all-in-one battery monitor, only without the display. Your phone acts as a display. The Smart Hunt connects via Bluetooth with the VictronConnect app on your phone (or tablet) and you can read all monitored battery parameters such as charge status, remaining time, course information and much more comfortable.Alternatively, the Smart Hunt can be connected and be read by a GX device. Connection to the Smart Hunt via a VE.Direct cable.The Smart Hunt is a good alternative for a BMV battery monitor, especially for systems where a battery monitoring is required, but less wiring and disorder is desired.The Smart Hunt is equipped with Bluetooth, a VE.Direct port and a compound that can be used for: monitoring a second battery monitoring center or a temperature sensor.Power supply voltage range from 6.5 to 70 VDCCurrent consumption <1mARange of input voltage,Additional battery 6.5 to 70 VDCBattery capacity (Ah) 1-9999 AhOperating temperature -40 + 50 ° C (-40 - 120 ° F)Measuring voltage of a second battery,Temperature or center YesTemperature range -20 + 50 ° CVE.Direct communication port YesRESOLUTION AND ACCURACYCurrent ± 0.1AVoltage ± 0.01VAmpere hours ± 0.1 AhCharge state (0 - 100%) ± 0.1%Remaining time ± 1 minTemperature (if optionalTemperature sensor is attached)± 1 ° C / ° F(0 - 50 ° C or 30-120 ° F)Current measurement accuracy ± 0.4%Offset Less than 20/40/80 mAVoltage measurement accuracy ± 0.3%INSTALLATION & DIMENSIONSDimensions (HxBxT) 46 x 120 x 54 mmProtection class IP21STANDARDSSafety EN 60335-1Emissions / Immunity EN 61000-6-1 IEC EN 61000-6-2 IECEN-IEC 61000-6-3Automotive industry EN 50498Cable (supplied) Two cables with fuse for '+' - Connectionand starter battery or midpoint connectingOptionally, temperature sensor (ASS000100000)

Digitaler Strommessshunt zum Einbau in die Minus-Leitung einer Ladequelle oder eines Verbrauchers. Der Anschluss der Stromversorgung erfolgt über die steckbare Klemme. Anschlussbolzen M8, P-Bus Steckverbinder M12-T. Strombelastbarkeit: 300 A, 600 A 1 min, 1500 A 0,5 sStromaufnahme: 20 mA (5 mA sleep-mode)Betriebsspannung: 8 - 32 VMeßbereich: 10 mA - 300 AAbmessungen L 118 x B 40 x H 65 mm

Remote monitoring panels &

Two-stage discharge protection for optimum protection of your batteriesDischarge 12 / 24V with alarm, Type TSD 40The remote-controlled discharge TSD 40 protects the battery (ies) from damage by deep discharge.Conventional devices switch to a shock loads connected from.With the two-stage discharge, you can continue to operate important or safety-relevant consumers, while luxury is disconnected if declining battery voltage in a first step.Of the impending shutdown warns an audible alarm.The restart occurs automatically at 12.5 / 25V.The setting "13 V" an energy management can be realized, e.g.. an additional cooler, a heating mat or a water heater can be activated as soon as the generator is running or a solar panel generates enough energy.With the remote control panel FB-TSA, the two outputs can be remotely switched and turned back on in an emergency for a short period of time.Operating voltage 12/24 V DC, set via DIP switchesSwitching capacity per channel (2) max. 40 ACut-off voltage Rel.1 * via DIP switches: 11.8 / 12.0 / 12.2 / 13 V @ 300 sShutdown voltage Rel.2 * via DIP switches: 10.8 / 11.2 V @ 50 sReclosing voltage * 12.5VCurrent consumption of 1,3 mA / 12 V, 2 mA / 24 VConnection screw terminals, max. 10 mm2Dimensions L 130 x W 80 x H 42 mm* At 24V: duplicate values!

Control panel 40 for the discharge TSD Using the control panel can be switched consumers (to 40A) on the TSD 40 (ON / OFF). The control LED indicates the operating state.not suitable for TSA 265!Dimensions W x H 105 52.5 x 40 mm T