Sunware - PWM controllers & accessories

For 12 / 24V battery systemsPart No: 320089Manufacturer: SunwareProduct Weight: 0.24 kgWeight incl. Packaging: 0.24 kgDimensions: 100 x 44 x 56 mm (L x B x H) For 12 / 24V battery systemsPart No: 320089Manufacturer: SunwareProduct Weight: 0.24 kgWeight incl. Packaging: 0.24 kgDimensions: 100 x 44 x 56 mm (L x B x H)

Sunware Fox built-in charge controller provide optimum charging efficiency and battery care: you increase the battery life by protecting them from dangerous overloading and gas development.Flexible Technology: You can optionally up to 2 battery systems connect (only when Fox 320 and 360). A conversion is not necessary.Best value: Automatic battery care through 14-day gasing and 3-stage charging characteristic.Optimum comfort: Fox charge controllers are maintenance-free. After installing your solar system works by itself.Safety: Advanced technology and intelligent features provide maximum security for your solar system.The charge controller FOX-220 and FOX-260 are ideal for single battery systems, FOX-320 and FOX-360 for up dual battery Systeme.FOX-220 can / -320 (LEDs) optionally with the display FOX werden.FOX-260 connected MD1 / -360 have an integrated display.The FOX-220 is a solar charge controller module for currents up to 20 A, suitable for AGM, gel and lead-acid batteries. Consumers can be connected up to a maximum power consumption of 20 A. The adaptive total discharge protection monitors and protects the battery against harmful deep discharge, and alternatively the nightlight function can be used. The optimized charge characteristic curve in combination with the hardware PWM control achieves a distinctly faster and gentler charging of the battery, hazardous gassing or overcharging are safely prevented. The controller detects the system voltage fully automatically. The active-return valve guarantees the reverse current protection and enables an extremely low voltage drop between module and battery. The three LEDs provide information about the state of charge of the battery and signals flowing whether a charging current or the charging current of the Relger current is reduced (float charging). the digital display may FOX-MD1 being shot at the FOX-220 at any time by simply plugging in a single cable. With this, the current voltages and currents can be displayed and shown graphically. The programming function of the FOX-MD1 various parameters can be changed and saved. For one battery system, 12 / 24V, 20A, overcharge protection, LCD display, night light functionPart No: 321125Manufacturer: SunwareProduct Weight: 0.30 kgWeight incl. Packaging: 0.30 kgDimensions: 128.6 x 106.7 x 53.3 mm (L x B x H)

For FOX-220 and FOX-320Article No.: 320093Manufacturer: SunwareProduct weight: 0.15 kgWeight including packaging: 0.50 kgDimensions: 157 x 41 x 66 mm (L x W x H)For FOX-220 and FOX-320Article No.: 320093Manufacturer: SunwareProduct weight: 0.15 kgWeight including packaging: 0.50 kgDimensions: 157 x 41 x 66 mm (L x W x H)

Sunware FOX installer offers optimal loading efficiency and battery care: They increase the lifespan of the battery by protecting them from dangerous overload and gas development.Flexible technology: You can either connect up to 2 battery systems (only with FOX 320 and 360). A change is not necessary.Highest benefit: automatic battery care due to 14-day gas load and 3-stage charging characteristic.Optimal comfort: Fox loader is maintenance -free. After installation, your solar system works by itself.Security: Execerrated technology and intelligent functions offer maximum security for your solar system.The charge controllers FOX-220 and FOX-260 are ideal for one-battery systems, FOX-320 and FOX-360 for to two-battery systems. MD1 are connected. Fox-260/-360 have an integrated display.The FOX-220 is a solar loader for module flows up to 20 A, suitable for AGM, gel and lead acid batteries. Consumers can be connected up to a maximum of 20 A. The adaptive deep release protection monitors and protects the battery from harmful deep discharge, alternatively the night light function can be used. In combination with the Hardware PWM control, the optimized charging characteristic achieves a significantly faster and gentler load of the battery, dangerous gastung or overload are safely prevented. The controller recognizes the system voltage fully automatically. The active return flow lock guarantees the backstream protection and enables an extremely low voltage drop between the module and the battery. The three LEDs provide information about the charging status of the battery and signal whether a charging current flows or the relger reduces the charging current current (conservation load). The Multi Display FOX-MD1 can be shot at any time by simply infecting the FOX-220. The current tensions and currents can then be displayed and also shown graphically. With the programming function of the FOX-MD1, various parameters can be changed and saved.12/24v, 20a, over- and deeper charging protectionArticle No.: 320091Manufacturer: SunwareProduct weight: 0.30 kgWeight including packaging: 0.30 kgDimensions: 126 x 54 x 107 mm (L x W x H)

For 12/24V battery systemsArticle No.: 320090Manufacturer: SunwareProduct weight: 0.10 kgWeight including packaging: 0.20 kgDimensions: 115 x 35 x 78 mm (L x W x H)For 12/24V battery systemsArticle No.: 320090Manufacturer: SunwareProduct weight: 0.10 kgWeight including packaging: 0.20 kgDimensions: 115 x 35 x 78 mm (L x W x H)

FOX-062 plug-in charge controller 6A 12 / 24V, overcharge protection, 3-color LED