Philippi ACE Ladegeräte

Automatik-Ladegerät für mittlere und große Batterie-Anlagen von bis zu 3 Batteriegruppen (Starter, Service und Bug-Batterie) und Kapazitäten bis zu 1000 Ah. Die großen Modelle der ACE-Serie sind ebenfalls mit der aktuell modernsten Schaltnetzteiltechnik ausgestattet und liefern die volle Ladeleistung bis zu einer Umgebungstemperatur von 50°C. So steht auch in der Mittelmeerumgebung jederzeit die volle Leistung zur Verfügung. Die automatische Erkennung der AC-Eingangsspannung sorgt in Verbindung mit dem weiten AC-Eingangsspannungsbereich von 90 - 265 V/47 - 65 Hz dafür, dass das Gerät weltweit ohne Leistungseinbußen eingesetzt werden kann. Damit wird auch stets die volle Ladeleistung unabhängig von der AC-Stromquelle oder Generator geliefert. An die integrierte P-Bus Schnittstelle kann ein System-Monitor zur Fernüberwachung der Ladung angeschlossen werden.Ladestrom: 80ANennspannung: 24V                     Empf. Bat. Kapazität: 300-800 AhStromaufnahme 230/115 V: 12,0/24,0 AAbmessungen L x B x H: 270x360x130 mmGewicht: 6,8 kg

ACE-T cable for ACE high-power chargers.ACE 12/90ACE 24/45ACE 24/60ACE 24/80ACE 24/100

Automatic charger for medium and large battery systems for the individual charge of up to 3 battery groups (starter, service and bug battery) and capacities of up to 1000 AH.The large models of the ACE series are also equipped with the most modern switching power supply technology and deliver the full charging capacity up to an ambient temperature of 50 ° C.Full performance is always available in the Mediterranean environment.The automatic detection of the AC input voltage in conjunction with the wide AC input voltage range of 90 - 265 V/47 - 65 Hz ensures that the device can be used worldwide without performance losses.This always supplies the full charging capacity regardless of the AC power source or generator.The light and stable aluminum housing can be installed quickly and safely using the supplied wall bracket.The devices are optimized with regard to moisture protection and cooling for wall mounting.The electrical connection area is covered by a front -side flap and enables safe installation and protected from environmental influences.The front-side LED state indicator provides information about the device state, optionally a 2.4 “color-TFT monitor can be integrated.The device cooling is via a regulated fan.The 5-stage loading characteristic for fast and complete charging for all battery types: lead-acid, maintenance-free, calcium-tin, AGM, gel, lithium, custom characteristic, power supply mode.The temperature sensor contained in the scope of delivery adapts the charging characteristic to the battery temperature.A PSM monitor can be connected to the integrated P-bus (ACE-T cable required) Interface to remove the charge.- charging current: 100 a- Nominal voltage: 24 V-Rec. Battery capacity: 400-1000 AH- Input voltage range: 90 - 265 VAC (47 - 65 Hz), efficiency typical 87%- AC power recording 230/115 V: 15.1 A / 30.2 a- Outputs: 3, each output can hand over the maximum charging current- Connection bolts: M8- Dimensions (LXBXH): 270 x 410 x 130 mm- Weight: 7.5 kg- Charging characteristics: iu or iuou adjustable by internal dip switch.- Battery types: wet, gel, AGM, lead-kalcium, lifepo4, dc power supply mode, free characteristic- Conservation voltage: 28.8 V / 27.6 V DC (Lead of Lead Setting)- Cooling: Microprocessor controlled fan

Automatic charger for medium and large battery installations for the individual charge of up to 3 groups of batteries (starter, service and bow battery) and capacities up to 1000 Ah.The large models of the ACE series are also equipped with the currently most modern switching power supply technology and deliver the full capacity up to an ambient temperature of 50 ° C.And so it is in the Mediterranean area at any time the full power available.The automatic detection of the AC input voltage, in conjunction with the wide AC input voltage range from 90 to 265 V / 47-65 Hz that the device can be used worldwide without compromising performance.Hence always full charging power is supplied independently of the AC power source or generator.The lightweight, rugged aluminum housing can be installed quickly and securely using the supplied wall bracket.The devices are optimized in terms of moisture protection and cooling for wall mounting.The electrical connection area is covered by a front flap and allows safe and protected from the environment installation.The front LED status display provides information on the device status, optionally, a 2.4 "color TFT monitor are integrated.The device cooling takes place via a controlled fan.The 5-stage charge characteristic for rapid and complete charging for all types of batteries: lead acid, maintenance-free, calcium-tin, AGM, GEL, lithium, custom curve, power supply mode.The temperature sensor supplied adjusts the charging curve to the battery temperature.a PSM-monitor can be connected to the remote monitoring of the charge to the integrated P-BUS (ACE-T cable required) interface.- Charging current: 60 A- Rated voltage: 24 V. - Rec Battery Capacity: 250-600 Ah- input voltage range: 90 - 265 VAC (47 - 65 Hz), typical 87% efficiency- AC current consumption 230/115 V: 9.0 A / 18.1 A- Outputs: 3, each output can output the maximum charging current- connecting bolts: M6- Dimensions (LxWxH): 270 x 360 x 130 mm- Weight: 5.2 kg- charging characteristics: IU or IUoU by internal DIP switch.- battery types: Wet, GEL, AGM, lead-calcium, LiFePO4, DC power supply mode, Speed

Automatic charger for medium and large battery installations for the individual charge of up to 3 groups of batteries (starter, service and bow battery) and capacities up to 1000 Ah.The large models of the ACE series are also equipped with the currently most modern switching power supply technology and deliver the full capacity up to an ambient temperature of 50 ° C.And so it is in the Mediterranean area at any time the full power available.The automatic detection of the AC input voltage, in conjunction with the wide AC input voltage range from 90 to 265 V / 47-65 Hz that the device can be used worldwide without compromising performance.Hence always full charging power is supplied independently of the AC power source or generator.The lightweight, rugged aluminum housing can be installed quickly and securely using the supplied wall bracket.The devices are optimized in terms of moisture protection and cooling for wall mounting.The electrical connection area is covered by a front flap and allows safe and protected from the environment installation.The front LED status display provides information on the device status, optionally, a 2.4 "color TFT monitor are integrated.The device cooling takes place via a controlled fan.The 5-stage charge characteristic for rapid and complete charging for all types of batteries: lead acid, maintenance-free, calcium-tin, AGM, GEL, lithium, custom curve, power supply mode.The temperature sensor supplied adjusts the charging curve to the battery temperature.a PSM-monitor can be connected to the remote monitoring of the charge to the integrated P-BUS (ACE-T cable required) interface.- Charging current: 45 A- Rated voltage: 24 V. - Rec Battery Capacity: 200-450 Ah- input voltage range: 90 - 265 VAC (47 - 65 Hz), typical 87% efficiency- AC current consumption 230/115 V: 6.8 A / 13.6 A- Outputs: 3, each output can output the maximum charging current- connecting bolts: M6- Dimensions (LxWxH): 270 x 360 x 130 mm- Weight: 5.2 kg- charging characteristics: IU or IUoU by internal DIP switch.- battery types: Wet, GEL, AGM, lead-calcium, LiFePO4, DC power supply mode, Speed

Automatic charger for medium and large battery systems for the individual charge of up to 3 battery groups (starter, service and bug battery) and capacities of up to 1000 AH.The large models of the ACE series are also equipped with the most modern switching power supply technology and deliver the full charging capacity up to an ambient temperature of 50 ° C.Full performance is always available in the Mediterranean environment.The automatic detection of the AC input voltage in conjunction with the wide AC input voltage range of 90 - 265 V/47 - 65 Hz ensures that the device can be used worldwide without performance losses.This always supplies the full charging capacity regardless of the AC power source or generator.The light and stable aluminum housing can be installed quickly and safely using the supplied wall bracket.The devices are optimized with regard to moisture protection and cooling for wall mounting.The electrical connection area is covered by a front -side flap and enables safe installation and protected from environmental influences.The front-side LED state indicator provides information about the device state, optionally a 2.4 “color-TFT monitor can be integrated.The device cooling is via a regulated fan.The 5-stage loading characteristic for fast and complete charging for all battery types: lead-acid, maintenance-free, calcium-tin, AGM, gel, lithium, custom characteristic, power supply mode.The temperature sensor contained in the scope of delivery adapts the charging characteristic to the battery temperature.A PSM monitor can be connected to the integrated P-bus (ACE-T cable required) Interface to remove the charge.- charging current: 80 a- Nominal voltage: 12 V-Rec. Battery capacity: 400-800 AH- Input voltage range: 90 - 265 VAC (47 - 65 Hz), efficiency typical 87%- AC power recording 230/115 V: 6.0 A/12.0 A- Outputs: 3, each output can hand over the maximum charging current- Connection bolts: M8- Dimensions (LXBXH): 270 x 360 x 130 mm- Weight: 6.2 kg- Charging characteristics: iu or iuou adjustable by internal dip switch.- Battery types: wet, gel, AGM, lead-kalcium, lifepo4, dc power supply mode, free characteristic- Conservation voltage: 14.4 V /13.8 V DC (Lead of Lead Setting)- Cooling: Microprocessor controlled fan

ACE-T cable for chargers with P-bus interface.ACE 12/60ACE 24/30Also suitable for Lau

Das neue Batterie-Ladegerät ACE ist der Start in die vollkommen neu konstruierte Modellgeneration. Die neuen Modelle stehen für modernste Schaltnetzteiltechnik in Hinblick auf Effizienz und Wirkungsgrad. Dadurch konnte die Eigenerwärmung der Geräte minimiert und der Kühlbedarf reduziert werden. Alle Geräte bis zu einem Ausgangsstrom von 40A bei 12V und 20A bei 24V arbeiten lüfterlos und somit weitgehend geräuschlos, welches einen großen Komfortgewinn speziell im Betrieb nachts in Kojennähe darstellt. Ein großer Vorteil gegenüber anderen Ladegeräten besteht darin, dass die volle Ladeleistung bis zu einer Umgebungstemperatur von 60°C aegeben wird. So steht auch in der Mittelmeerumgebung jederzeit die volle Leistung zur Verfügung.Die Geräte sind in Bezug auf Feuchtigkeitsschutz und Kühlung zur Wandmontage optimiert, welches an Bord die bevorzugte Montageart darstellt. Alle Anschlüsse sind steckbar ausgeführt und erleichtern die Montage auch an schlecht zugänglichen Orten.- Die Ladekennlinie kann am Gerät über interne DIP-Schalter aus 7 unterschiedlichen Kennlinien gewählt werden. Außerdem steht ein Winterlager- sowie ein Netzteilmodus zur Verfügung. Eine zusätzlich aktivierbare Refresh-Funktion dient der Batteriepflege.- Ein im Gerät integrierter Ausgangsladestromverteiler ermöglicht den Anschluss von bis zu 3 Batteriegruppen.- Eine Power- und eine zweifarbige Ladezustandsanzeige zeigen den Gerätezustand an, ein integriertes Farbdisplay ist optional erhältlich, ab ACE 12/60 Serienausstattung.- Anschlussmöglichkeit für ein Fernanzeige-Display. P-BUS-Schnittstelle ab ACE 12/40, Nachrüstung für ACE 12/25 möglich.- Anschluss für einen Temperaturfühler Temp-BT (im Lieferumfang enthalten).- Weltweit einsetzbar durch Eingangsspannungsbereich 110-230 V

Automatic charger - ACE12 / 25 - 12V, max. 25A

Cable set, length 2 m, suitable for automatic charger 65A.Type KS KS 2-65 or 2-60 (for ALC 12/65)

Cable kits suitable for respective automatic charger - m length secondPart No .: 049220045KS 2-50 cable set 50 A

Cable kits suitable for respective automatic charger - m length secondPart No .: 049220030KS 2-30 cable set 30 A