Brackets and Fittings

14 in stock

NOA - mounting plate small for table frame Lagun

To compensate for the assembly of NOA table bases.Only (!) the plate is sold, not the strut with lever shown.

€25.90*

40 in stock

Rope lichen - Täuwerk Klemme Super Sharky for 6 mm 600 Dan

Tauwerk clamp Super Sharky for 6 mm 600 Dan.Our dew plant clamp is an elegant option, in contrast to the splice without tools without tools-in a matter of secondsto produce adjustable dew shop. The advantage of a palstal is that the clamp is smaller and smoother, soCannot and that it can be opened immediately with wet dew after a long and high load.The fracture loads of the clamp are equally high or higher than the fracture loads of blocks, case clamps and many other components for comparable rope diameter.The size of the eye can be set by the adjustment.The rope-lichen dew plant clamp is suitable for almost all commercially available types of dew, i.e. also, or especially for ropes that can no longer be split.The clamp consists of a very firm, UV-resistant and salt water-resistant plastic with a high fiber optic content-a protective is not to be feared.

€4.61* €5.12* (9.96% saved vs. recommended price)

5 in stock

NOA - table frame Lagun - 750 mm for tables

The lagoon table frame is the perfect solution for installing a cockpitic.The ingenious table fitting makes it possible to set the table variable as required.- The assembly plate is attached to the side of the cockpit wall.- The table frame is snapped into this assembly plate if necessary.- The frame can be adjusted in height.- With the two 360 degrees pivot points, the table can be turned and swiveled into any position.- The missing table legs ensure optimal freedom of movement.- If you are not used, the table is removed from the bracket with just a few simple steps and can be stowed away in space.- With an additional assembly plate (available separately), the table can also be used in the cabin.- The robust base is made of solid, sea water -resistant aluminum.- Can be combined with any table top.Dimensions:- table leg 750 mm- ARM 400 mm- Recording for table top 200 x 300 mmDelivery without a table top - only the frame!Scope of delivery:• Aluminum assembly plate (92 mm x 170 mm x 13 mm)• 2 x plastic compensation skills (white)• 1 x counter plate to the aluminum assembly plate• 4 x stainless steel fastening screws including counter -nuts/washers (8 mm x 50 mm)• Aluminum table foot (750 mm)• Aluminum table arm (400 mm)• Subt table mounting plate (200 x 300 mm) for absorbing a table top.

€219.90* €229.90* (4.35% saved vs. recommended price)

20 in stock

Rope lichen - Täuwerk Klemme Super Sharky for 8 mm 700 Dan

Rope clamp Super Sharky 8 mm 700 daNOur rope clamp is an elegant way, without any tools within seconds one - as opposed to splice - againmake adjustable rope eye. The advantage over a rope at is that the clamp is small and smooth, Socan not jam and that it is also opened with wet rope after a long and high load immediately.The breaking loads of the clamp are equal to or higher than the breaking loads of blocks case, terminals, and many other components for comparable rope diameter.By adjusting the size of the eye can be adjusted.The Seilflechter rope clamp is suitable for almost all common types of rope, so too, or just for no more spliceable ropes.The terminal consists of a very strong, UV resistant and salt water resistant plastic with high glass fiber content - embrittlement is not to be feared.

€4.91* €5.46* (10.07% saved vs. recommended price)

1 in stock

NOA - Breaking the Relings adjustable for solar modules on Ø 25

Rail mount solar modules, adjustable- The adjustable attachment of framed solar modules on horizontal railing tubes (rear basket).- The solar module is mounted on two 650 mm long aluminum profiles around the railing tube horizontally pivotable.- As a result a contingent exposure to the sun is possible.- with fittings (1 pair) for attachment to 25 mm (1 ") rail tubes.

€108.90* €114.90* (5.22% saved vs. recommended price)

10 in stock

NOA - mounting plate for table frame Lagun

To compensate for the assembly of NOA table bases.Only (!) the plate is sold, not the strut with lever shown.

€42.50*

16 in stock

Rope lichen - Täuwerk Klemme Super Sharky for 10 mm 850 Dan

Rope clamp Super Sharky 10 mmBreaking load: 850 daNOur rope clamp is an elegant way, without any tools within seconds one - as opposed to splice - againmake adjustable rope eye. The advantage over a rope at is that the clamp is small and smooth, Socan not jam and that it is also opened with wet rope after a long and high load immediately.The breaking loads of the clamp are equal to or higher than the breaking loads of blocks case, terminals, and many other components for comparable rope diameter.By adjusting the size of the eye can be adjusted.The Seilflechter rope clamp is suitable for almost all common types of rope, so too, or just for no more spliceable ropes.The terminal consists of a very strong, UV resistant and salt water resistant plastic with high glass fiber content - embrittlement is not to be feared.

€5.57* €6.19* (10.02% saved vs. recommended price)

7 in stock

NOA - Lagun table frame - 500 mm for tables

!! Unfortunately, the manufacturer currently has delivery delays, please book by buying a copy - that deliver order !!The Lagun table frame is the perfect solution for mounting a cockpit table.The brilliant table fitting allows you to set the table variable as needed.- The mounting plate is secured to the cockpit wall laterally.- In this mounting plate the table frame is snapped when needed.- The frame can be adjusted in height.- With the two 360 degree pivot points, the table can be rotated and swiveled in any position.- Under the table optimum freedom of movement is guaranteed by the missing legs.- When not in use, the table is just a few steps away from the holder and can be stored in a space-saving manner.- (sold separately) With an additional mounting plate, the table can also be used in the cabin.- The robust chassis is made of solid, seawater resistant aluminum.- Can be combined with any table.Dimensions:- Leg 500 mm (in 750 mm available - Item No. 1918102)- Arm 400 mm- Recording for table top 200 x 300 mmDelivery without table top - only the frame!

€209.90* €219.90* (4.55% saved vs. recommended price)

5 in stock

NOA table arm, 400 mm

Replacement arm for table frame LagunDelivery without a plate !!, only the horizontal arm

€64.40* €64.50* (0.16% saved vs. recommended price)

Backordered

Rope lichen - pipe clamp A2, half shell for 25 mm

Pipe clamp A2, half shell, for round diameter 25 mm

€1.95* €2.00* (2.5% saved vs. recommended price)

Backordered

NOA - cover frame support, holder 25mm

LAGUN - deck frame support, bracket 25mm

€13.90*

5 in stock

LAGUN - Ausgleichskeil aus Kunststoff für Tischgestell

LAGUN - Ausgleichskeil

€5.00*

Backordered

NOA - universal fitting for Ø 30 mm (1 1/8 ") - Relings tube

Universal fitting from aluminum.Solves endless attachment problems on board. Suitable for mounting on all rail tubes, stanchions, bow and stern baskets.

€19.40* €19.80* (2.02% saved vs. recommended price)

1 in stock

NOA - table leg, 750 mm

For Lagun table frame 700

€59.40* €62.50* (4.96% saved vs. recommended price)

Backordered

NOA - pipe holder with clamping screw 25mm

Universal fitting from aluminum.- Suitable for use of two parallel rail tubes, stanchions, bow and stern baskets, etc.- For pipe diameters of 25 mm (1 ").

€41.90*

1 in stock

Rope lichen - Niro -Wantenpanner M6 for 3 mm rope

Niro-Wantenpanner M6 for 3 mm rope, with two fork standard.Length: 95/145 mm

€5.88* €6.53* (9.95% saved vs. recommended price)

3 in stock

NOA - table leg, 500 mm

Ersatz-Tischbein für alle Lagun Tischgestelle.Länge 500 mmAuch für in 700 und 900 mm Länge erhältlich.

€56.40* €59.50* (5.21% saved vs. recommended price)

Backordered

NOA - universal fitting for Ø 25 mm (1 ") - Relings tube

Universal fitting for railing pipes.- Multi-purpose fitting from aluminum.- Solves endless attachment problems on board.- Suitable for mounting on all rail tubes, stanchions, bow and stern baskets.- For railing tubes with 25 mm (1 '') diameter

€13.90*

4 in stock

Rope lichen - plastic clamping clamp

Plastic cleat 75 mm.Two holes.

€0.92* €1.02* (9.8% saved vs. recommended price)

Backordered

NOA - universal fitting for Ø 38 mm (1 1/2 ") - Relings tube

Universal fitting from aluminum.Solves endless attachment problems on board. Suitable for mounting on all rail tubes, stanchions, bow and stern baskets.

€16.50*

Backordered

NOA - knurled screw replacement for solar module relay holder,

M8 x 30mmsuitable for e.g. NA10606

€6.80*

2 in stock

Rope braid - mast plate with ring A2, 60 x 36 mm, diamond

Mast plate with ring A2-Aisi 304,Dimensions: 60 x 36 mm, diamond shape, four hole boresRing strength: 5 mm.

€3.76* €4.18* (10.05% saved vs. recommended price)

4 in stock

LAGUN - Plastikzapfen (für LAGUN Bein/Tischfuß)

LAGUN - Plastikzapfen (für Lagun Bein/Tischfuß)

€19.90*

4 in stock

NOA - double fitting for relay tubes

Universal fitting from aluminum.- Suitable for use of two parallel rail tubes, stanchions, bow and stern baskets, etc.- For pipe diameters of 25 mm (1 ").

€22.50*

Filter products

Brackets and Fittings