Zuverlässige Stromversorgung für Boote, Yachten und Reisemobile

A sensible article from the power supply product group. This article is a blocking goods. Due to the size, weight or nature of the article, there are additional shipping costs in this case, which are also calculated.

Blue Smart IP65 charger 12 V / 15 a- Automatic power supply function- Powerful in extreme cold: up to -30 ° C- Protection against splash water, dust and chemicals- Seven -stage intelligent loading algorithm- Function to restore a deep -downloaded “dead” battery- Several other functions to extend the battery life duration- Low energy mode for charging small batteries-Lithium-ion battery mode- Setup and configuration, display of voltage and electricity through Bluetooth SmartThe Blue Smart IP65 charger is the new professional battery charger with a built -in Bluetooth!The Blue Smart IP65 charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes.The seven-level loading algorithm gets the best out of her battery.The charger provides the battery the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.Unlike other brands, the Blue Smart IP65 charger will try to recharge a deep-discharged battery by forceing it to weak charging current.The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections.The charger is supplied with both crocodile terminals and M8 cable shoes - this makes connecting to the battery very simple.You can always leave the device connected if desired.The Blue Smart IP65 charger has built -in Bluetooth.In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop.All settings of the charger can be configured with the VictronConnect app.Input voltage area: 180-265 VACEfficiency: 94%Electricity consumption in standby operation: 0.5 W"Constant" charging voltage: normal: 14.4 V / high: 14.7 V / lithium-ion: 14.2 V"Conservation" charging voltage: normal: 13.8 V / high: 13.8 V / lithium ions: 13.5 V"Learning" charging voltage: normal: 13.2 V / high: 13.2 V / lithium ions: 13.5 VCharging current: 15 aLow current mode: 4 aTemperature compensation (only lead-acid batteries): 16 MV/ºCCan be used as a power supply: YesReturn current: 0.7 AH/Month (1 ma)Protection: Against pole and short circuit at the output and overheatingOperating temperature range: -20 to +50 ° C (full nominal output up to 30 ° C) cables keep flexibility at low temperaturesMoisture (not condensing): max 95 %Battery connection: 1.5 m long black and red cable230 V AC connection: Cable with 1.5 m with CEE 7/7 plugsProtection class: IP65 (dust u. Moisture protection)Weight: 0.9 kgDimensions (H x W x D): 60 x 105 x 190 mm

-Low voltage-temperature coefficient ensures high efficiency, even at high temperatures.-Außergewöhnliche performance even in low light conditions and high sensitivity to light across the entire solar spectrum.-25 years limited warranty on power output and performance.-2 years limited warranty on materials and workmanship.-Versiegelter, waterproof, multi-functional junction box gives high level of security.High-excursion bypass diodes minimize power drop caused by shading.-The sophisticated E VA (Ethylene Vinyl Acetate) encapsulation system with three-layer back sheet meets the most stringent safety regulations for high-voltage operation.-By A sturdy, anodized aluminum frame allows modules with a number of standard mounting systems can be easily installed on the roof.-The tempered glass of the highest quality, high-transmission tempered glass provides enhanced strength and impact resistance.-Vorverkabeltes quick-connect system with MC4 connectors.Lots: 115 W-12 V-Dimensions (LxWxH): 1015x668x30mm-Weight: 8 kg-Nennleistung (P MPP): 115 W-Max. Voltage (V MPP): 19 V-Max. Current intensity (I MPP): 6.04 A-Leerlaufspannung (V OC): 23.32 VShort-circuit current (I SC): 6.61 A similar image

Lead Crystal batteries are used in all areas where high standards of safety, performance and long service life are required. Insensitive to cold and heat, minimal self-discharge, extremely long life of up to 18 years, freedom from maintenance and maximum security, make it an ideal battery type.Lead Crystal batteries combine a revolutionary technological breakthrough in battery technology, the full benefits of existing technologies.- The most common shortcomings of lead-acid, lead-acid batteries such as AGM and short life, poor performance and maintenance are eliminated.- The main problems of lithium batteries such as Environmental damage in production and disposal, poor performance at low temperatures, as well as fire and explosion hazard are also removed.Lead Crystal batteries combine all the advantages of a long life, high efficiency, safety and good environmental compatibility.The main differences of the Lead Crystal® batteries to conventional lead-acid batteries are:- lead plates of the highest quality (99.97% pure lead and the lead plates are at the core of the electrochemical reaction, and thus the most important component of the battery; no cadmium, no antimony)- AGM-like separating material (made of ultra-fine glass fiber separator of high porosity)- Novel electrolyte; Using a unique complex technology using a variety of inorganic salts and organic substances, which enhances the reaction between the electrolyte and the electrode active material, its reaction and also safety. When charging / discharging of the battery, the electrolyte is solidified in a crystalline structure and there is no liquid in the battery.Advantages of Lead Crystal batteries- temperature resistance (range from -40 to +65 degrees)- Maintenance-free, no gassing, low heat- No liquids can escape- Location hard, can be mounted in all positions- Can be discharged to 0V and has after 2 cycles again full capacity- Loads and unloads 20% - 40% faster than conventional batteries, best high-rate- Extremely low self-discharge, 2 years can be stored without recharging- No hazardous during transport and storage Technical specifications- Max charge voltage (absorption). 14.3 to 14.7 V DC @ 25 ° C- Conservation charging voltage (float): 13.6 to 13.8 VDC @ 25 ° C- 3,670 cycles at 40% DOD- 2,450 cycles at 60% DOD- 1,630 cycles at 80% DOD- 680 cycles at 100% DOD6-CNFJ-55Rated voltage: 12 V DCCapacitance (C20): 60 AhCapacitance (C10): 55 AhDimensions (LxWxH): 229 x 138 x 215 mmOverall height inkl.Pole: 215 mmWeight: 16.9 kg

The intelligent battery shuntThe Smartshunt is an all-in-one battery device, only without a display. Your phone acts as a display. The Smartshunt connects via Bluetooth with the VictronConnect app on your phone (or tablet) and you can read all monitored battery parameters such as loading time, remaining term, course information and much more.Alternatively, the Smartshunt can be connected and read by a GX device. The Smartshunt is connected via a VE.Direct cable.The Smartshunt is a good alternative for BMV battery monitoring, especially for systems in which battery monitoring is required, but less wiring and disorder is required.The Smartshunt is equipped with Bluetooth, a Ve.Direct port and a connection that can be used for the following: monitoring of a second battery, the center monitoring or a temperature sensor.Tension range power supply 6.5 - 70 VDCElectricity recording

The intelligent battery shuntThe Smart Hunt is an all-in-one battery monitor, only without the display. Your phone acts as a display. The Smart Hunt connects via Bluetooth with the VictronConnect app on your phone (or tablet) and you can read all monitored battery parameters such as charge status, remaining time, course information and much more comfortable.Alternatively, the Smart Hunt can be connected and be read by a GX device. Connection to the Smart Hunt via a VE.Direct cable.The Smart Hunt is a good alternative for a BMV battery monitor, especially for systems where a battery monitoring is required, but less wiring and disorder is desired.The Smart Hunt is equipped with Bluetooth, a VE.Direct port and a compound that can be used for: monitoring a second battery monitoring center or a temperature sensor.Power supply voltage range from 6.5 to 70 VDCCurrent consumption

The intelligent battery shuntThe Smart Hunt is an all-in-one battery monitor, only without the display. Your phone acts as a display. The Smart Hunt connects via Bluetooth with the VictronConnect app on your phone (or tablet) and you can read all monitored battery parameters such as charge status, remaining time, course information and much more comfortable.Alternatively, the Smart Hunt can be connected and be read by a GX device. Connection to the Smart Hunt via a VE.Direct cable.The Smart Hunt is a good alternative for a BMV battery monitor, especially for systems where a battery monitoring is required, but less wiring and disorder is desired.The Smart Hunt is equipped with Bluetooth, a VE.Direct port and a compound that can be used for: monitoring a second battery monitoring center or a temperature sensor.Power supply voltage range from 6.5 to 70 VDCCurrent consumption

Pure sinus voltage, 500W, 48V DC input voltage, 230V 50 Hz, IP30 with solar loader 15a

A useful article from the group POWER

The CX series offers exceptional in-class features:In addition to a PWM charge control with temperature compensationCX-controller with extensive control,Programming and safety functions equipped.The state of charge of the battery is a bar graphpermanently displayed as the energy flows to and from the batteryas well as the load state (z. B. overload, load short-circuit).The discharge can be set in five ways:two fixed voltages, two charge states or adaptive(To preserve the batteries). CX controllers are equipped with acousticWarning functions and a programmable night light function.The compact housing can optionally (CX-DR) on aDIN rail mounted.Product features: Data Logger (1 year) for system analysis,Warning against load sheddingLCD display: battery level and charge current,5 load disconnect algorithms,Temperature-compensated three-stage PWM charging control (series regulator),Automatic 12/24 volt detection,Suitable for DIN rail mounting,Optional external temperature sensor CXNT,Optional remote display CXM,Optional PC interface and software CXI CXCOM, Module 20 A, load, 12/24 VDC, captive 4 mA, LCD, IP20,Grounding (negative), charger for batteries 2, screw 16 mm²,programmable data logger (MXI / CXLink)Manufacturer: PhocosProduct Weight: 0.17 kgWeight incl. Packaging: 0.30 kgDimensions: 103 x 101 x 32 mm (LxWxH)

Length 0.9 m