Batterie-Hauptschalter von Blue Sea und Philippi

A sensible article from the electrical installation product group

Schalter für die Bordnetz- oder Starter-Batterie. 2 Schaltstellungen: An, Aus. Batterieschalter mit Gehäuse aus ABSSpannungsbereich 6-32 VDauerlast bei 12V - 230AMax. Spitzenlast 12V - 345AGehäusefarbe: rotLänge und Breite: jeweils 110 mmHöhe: 66 mm

Digital switching and taxes via PSM and PSLThe new relay module enables a maximum of 10a to switch on 8 consumers via the integrated backup or protective switch. Potential switching is also possible. The respective channel can also be switched via the digital switching input on the CMR via a button.Integrated emergency operation:Each output channel can be bridged by passing the securing or the safety machine. This means that each circuit must be operated manually if the system fails. The coverage is retained by the safety machine or backup.Delivery including M12-T cable. PSL needs from version 1.3.0 and PSM2 from version 8bCMR 811 (fuse)Switch channels: 8 (1-pin)Electricity pollution per channel: 10 aInputs: 8Additional function: 4 PWM dimmersDimensions: W 140 x L 180 x H 50 mm

DIGITAL SWITCHING AND CONTROL VIA PSM AND PSLThe new relay module enables the secure switching of 4 loads maximum 10A via the integrated fuse or circuit breaker. Potential-free switching is also possible. The respective channel can also be switched via a button via the digital switching input on the CMR.Integrated emergency operation:Each output channel can be bridged by repositioning the fuse or the automatic circuit breaker. This means that each circuit can be operated manually in the event of a system failure. The protection provided by the automatic circuit breaker or fuse is retained.Delivery incl. M12 T cable. Requires PSL from version 1.3.0 and PSM2 from version 8BCMR 411S (with automatic circuit breaker)Switching channels: 4 (1-pole)Current load per channel: 10 A.Inputs: 4Additional function: 4 PWM dimmersDimensions: W 140 x L 120 x H 50 mm

DIGITAL SWITCHING AND CONTROL VIA PSM AND PSLThe new relay module enables the secure switching of 4 loads maximum 10A via the integrated fuse or circuit breaker. Potential-free switching is also possible. The respective channel can also be switched via a button via the digital switching input on the CMR.Integrated emergency operation:Each output channel can be bridged by repositioning the fuse or the automatic circuit breaker. This means that each circuit can be operated manually in the event of a system failure. The protection provided by the automatic circuit breaker or fuse is retained.Delivery incl. M12 T cable. Requires PSL from version 1.3.0 and PSM2 from version 8BCMR 411 (fuse)Switching channels: 4 (1-pole)Current load per channel: 10 A.Inputs: 4Additional function: 4 PWM dimmersDimensions: W 140 x L 120 x H 50 mm

PHILIPPI - Power Install System 250Batteriehauptschalter 250 A / 32 V zur Aufbaumontage passend für das Power Install SystemAbmessungen L 124 x B 95 x H 106 mm Die Installation von Hochstromkomponenten wie Hauptschalter und Sicherungen ist eine platz- und zeitraubende Aufgabe, da die Verbindung der einzelnen Komponenten aufgrund von mechanischen Unterschieden oftmals nur mit flexiblen Leitungen hergestellt werden kann. Unser neu entwickeltes Hauptverteilungssystem spart enorm viel Platz, Zeit und Geld. Zudem erhöht es die Sicherheit, da alle Verbindungen über passende Kupferlaschen miteinander verbunden werden. Die zentrale Komponenten sind der mechanisch schaltbare (EBH 250) oder der elektrisch fernbedienbare Batterie-Hauptschalter (FBR/TSA/FBC 265). Die nachfolgende Absicherung kann mit den Streifensicherungshalter ESH oder den Bolzensicherunghaltern EBF erfolgen.Am Ein- und Ausgang der Batterie-Hauptschalter kann ein Sicherungs-block ESF montiert werden, um Messleitungen und Verbraucher wie Bilgenpumpe, Ladegerät oder Heizung mit Dauerplus zu versorgen. Die Strombelastbarkeit des Systems beträgt 250 A und ist für DC 12 V und 24 V geeignet.Durch Kombination von mehreren Komponenten lässt sich eine kompakte Hauptstromverteilung für Starter- und Verbraucher-Batterie aufbauen, die zusätzlich mit einem Notschalter zum Start des Motors über die Verbraucher-Batterie ergänzt werden kann. Alternativ kann auch ein Laderelais eingesetzt werden. Dabei können mechanische oder fernbedienbare Hauptschalter (FBA / TSA / FBC) verwendet werden. An die Hauptschalterausgänge können Sicherungsblöcke angebaut werden, um die Hauptleitungen abzusichern. Seitlich können noch Kleinsicherungs-blöcke zur Absicherung von Dauerplus-Verbrauchern ergänzt werden. Die Verbindung erfolgt mit den passenden Verbindungslaschen.

M series-battery switch-for small spare nets, outboard motors and small installation machines- Connections made of tinned copper - best contact and maximum corrosion resistance- 22mm long connection bolts suitable for M10 ring cable shoes- Stable, closed plastic housing on the back with three inserted side parts enables the cable feed from different directions.- Suitable for structure, installation, as well as the sunken assembly in switching boards- Protection class IP66- switching function: 1/2 / off- interruption -free switching: no- Top load (30 seconds): 900A- Short -term resilience (5 min.): 500A- permanent load: 300a- Tension area up to: 32V DC- switching positions: 3Fastening screws not in the scope of delivery

Suitable for M-series-battery operator-6004The key can be secured or pulled off with a padlockM -Series Battery Switch Spare Locking Key - Red

Control button 0- (1) with LED feedback for the remote-controlled power switchFBC 260 and VCR 190thLoad 100 mA, green LED without a series resistor.

2 Poly version of the remote-controllable battery separator FBC.Manual emergency activity possible directly on the relay.Delivery including M12-T cable.Nominal voltage 12 + 24 V DCMax. Permanent current 2 x 260 a

m-series - battery switch - BLACK - For small wiring systems, outboard motors and small installation machinesThe key may be in the off position secured with a padlock or withdrawn Connections of tin-plated copper - best contact and maximum corrosion resistance22mm long connecting bolts suitable for M10 ring terminalsStable, reverse closed plastic enclosure with three retractable side members enables the cable feed from different Richtungen.Geeignet for assembly, installation, as well as the recessed mounting in control panelsprotection IP66Switching function: ON / OFFPeak loads (30 sec.): 900AShort-term load capacity (5 min.): 500AContinuous load: 300AVoltage range up to: 48V DCSwitch positions: 2

m-series - battery switch - For small wiring systems, outboard motors and small installation machinesThe key may be in the off position secured with a padlock or withdrawn Connections of tin-plated copper - best contact and maximum corrosion resistance22mm long connecting bolts suitable for M10 ring terminalsStable, reverse closed plastic enclosure with three retractable side members enables the cable feed from different Richtungen.Geeignet for assembly, installation, as well as the recessed mounting in control panelsprotection IP66Switching function: ON / OFFPeak loads (30 sec.): 900AShort-term load capacity (5 min.): 500AContinuous load: 300AVoltage range up to: 48V DCSwitch positions: 2

The ATD (Automatic Timer Dlsconnect) separates connected load after a set period of time at low voltage or with omission of the drive signal from the electrical system.- About a 12 V control signal, the load is connected into the electrical system. If the control signal from the timer is activated which separates the consumer after the preset time from the network.- With a low battery, the relay opens before the expiration of the selected switch-off time and thus protects the batteries.- Timer and undervoltage function can be disabled to the devices connected to the ATD devices via the control signal off.- sleep times 15 minutes - 4 minutes ago- System voltage 12 V DC- capacity maximum (

Battery switch for high current loads and permanent stress. High -quality professional execution based on the experiences from the relay technology in waterproof execution. Shift lever can be unscrewed.Installation or flange smuggling, installation hole Ø22 mmPermanent current: 250 aTop current: 500 A / 3 min, 1000 A / 30 sTension: Max. 80 V DCConnection: M8Protection class: IP 67Dimensions: Ø 66/54 x 105 mm BH 200-80 F

Remote-controllable battery switchwith PBUS interface FBC 265with M12 bus connectorincl. M12 T-connectorDimensions: L 111 x W 90 x H 60 mm

Remote-controllable battery switch with sub- and overvoltage shutdownThe remote-controllable battery switchgear 265 enables the comfortable remote-controlled input and switching off of DC-BRADENTSCH or individual consumers in 24V on-board networks from any point. Connection of the remote control panel FAR or the control switch RC can be operated and you can get a check-LED Feedback via the switch. The manual emergency activity (red and yellow button) integrated on the relay enables it to be switched on and off at the press of a button in the event of an error.Operating voltage: 8 - 30 VNominal current: 260 A at 20 ° C, line cross -section 95 mm²Overload / top current: 400A / 5S 1500A / 0.2SElectricity recording: Stand by: 3 MA at 26 VSwitching on undervoltage, T = 300 S --22.4 V (t = delay time)Return after undervoltage, T = 10 s --25 VSwitching on overvoltage, T = 60 s - 31.2 VReturn after overvoltage, T = 10 s - 29 VConnection terminals: M8Protection class IP 20Dimensions (LXBXH): 111 x 90 x 60 mmFigure similar

PBUS interface TSC for remote controlBattery switch with deep discharge protection