Go to homepage
€0.00*

Filter products

–

Buttons

14 in stock

%
Blue Sea - Boot Reset Button Blk
Blue Sea - Boot Reset Button Blk
BLUE SEA - Boot Reset Button Blk

€2.30* €2.42* (4.96% saved vs. recommended price)

13 in stock

%
Blue Sea - Boot Reset Button Clear
Blue Sea - Boot Reset Button Clear
Boot Reset button Clear

€2.30* €2.42* (4.96% saved vs. recommended price)

9 in stock

%
Installation pressure button, horn / start button, chrome -plated
Installation pressure button, horn / start button, chrome -plated
Button, 1 poly, brass version, button and decorative mother chrome -plated. Screw connections, max. 16 aInstallation diameter 16 mm, max. Wall thickness 22 mmOverall parking road (TXBXH): 54 x 22 x 33 mm

€15.90* €18.90* (15.87% saved vs. recommended price)

9 in stock

%
Installation pressure button, horn / start button, with rubber cap
Installation pressure button, horn / start button, with rubber cap
Pushbutton, 1 pole, brass finish, with waterproof GummikappeSchraubanschlüsse, max. 16 AEinbau diameter 16 mm, max. Wall thickness 22 mmGesamteinbaumaße

€14.90* €17.90* (16.76% saved vs. recommended price)

5 in stock

%
Installation pressure button, horn / start button
Installation pressure button, horn / start button
Plastic housing, push button with black rubber cap. Installation for wall thickness up to 9 mm, hole diameter 22.5 mm.Exception article - available as long as the stock lasts

€4.95* €5.80* (14.66% saved vs. recommended price)

2 in stock

Installation pressure button, horn / start button - brass version
Installation pressure button, horn / start button - brass version
Sea water resistant, brass case, pushbutton with black rubber cap Silberkontakte.Schaltleistung 250 W (10 sec.). Installation for wall thickness mm to 9, hole diameter. 22.5 mm.

€38.90*

Backordered

%
PHILIPPI - Drucktaster WT22RG
PHILIPPI - Drucktaster WT22RG
Print button in two red / green illuminated.Protection class IP67 for external assembly.Installation hole diameter 22 mm, for panel thickness 1-6 mm.The LEDs can be connected directly to the DC 12/24 V supply span.Electricity resilience switch contact NO/NC: 5 A.Delivery with plug -in connection cable 20 cm and with silicone cap to protect against mechanical blockages due to salt water crusts.

€21.90* €22.90* (4.37% saved vs. recommended price)

Backordered

%
PHILIPPI - Drucktaster WT22RG „Batterie Notstart“
PHILIPPI - Drucktaster WT22RG „Batterie Notstart“
Two-tone light-light stainless steel pressure button with laser-cut symbol.As a result, the symbol itself is also illuminated and cannot be removed.Protection class IP67 for external assembly.Electricity load capacity of DC 5 A. Installation diameter 22 mm, thread length 10 mm for panel thickness up to 6 mm.Delivery with plug -in connection cable 20 cm and with silicone cap to protect against mechanical blockages due to salt water crusts.Both LEDs can be controlled without potential (e.g. night lighting red + function lighting green).

€23.40* €24.90* (6.02% saved vs. recommended price)

Backordered

%
BLUE SEA - boat reset button Wht
BLUE SEA - boat reset button Wht
BLUE SEA - Boot Reset Button Wht

€2.30* €2.42* (4.96% saved vs. recommended price)

Backordered

%
Philippi-Kippetaster, chrome, two-pole (1) -0- (2)
Philippi-Kippetaster, chrome, two-pole (1) -0- (2)
Toggle switch, chrome, two-pole (1) -0- (2)

€13.90* €14.50* (4.14% saved vs. recommended price)

Backordered

%
PHILIPPI - Drucktaster WT30RG
PHILIPPI - Drucktaster WT30RG
Drucktaster zweifarbig rot / grün beleuchtbar. Schutzart IP67 für die Außenmontage. Einbauloch-Durchmesser 30 mm, für Paneldicke 1-6 mm. Die LEDs können direkt an die Versorgungsspan_x0002_nung DC 12/24 V angeschlossen werden. Strombelastbarkeit Schaltkontakt NO/NC: 5 A. Lieferung mit steckbaren Anschlusskabel 20 cm und mit Silikonkappe zum Schutz gegen mechanische Blockaden durch Salzwasserkrusten.

€22.40* €23.90* (6.28% saved vs. recommended price)

Backordered

%
PHILIPPI - Drucktaster WT22RG „Bilgepumpe“
PHILIPPI - Drucktaster WT22RG „Bilgepumpe“
Two-tone light-light stainless steel pressure button with laser-cut symbol.As a result, the symbol itself is also illuminated and cannot be removed.Protection class IP67 for external assembly.Electricity load capacity of DC 5 A. Installation diameter 22 mm, thread length 10 mm for panel thickness up to 6 mm.Delivery with plug -in connection cable 20 cm and with silicone cap to protect against mechanical blockages due to salt water crusts.Both LEDs can be controlled without potential (e.g. night lighting red + function lighting green).

€23.40* €24.90* (6.02% saved vs. recommended price)

Backordered

%
PHILIPPI - Druckschalter WS19RG
PHILIPPI - Druckschalter WS19RG
Druckschalter zweifarbig rot / grün beleuchtbar. Schutzart IP67 für die Außenmontage. Einbauloch-Durchmesser 19 mm, für Paneldicke 1-6 mm. Die LEDs können direkt an die Versorgungsspan_x0002_nung DC 12/24 V angeschlossen werden. Strombelastbarkeit Schaltkontakt NO/NC: 5 A. Lieferung mit steckbaren Anschlusskabel 20 cm und mit Silikonkappe zum Schutz gegen mechanische Blockaden durch Salzwasserkrusten.

€21.90* €22.90* (4.37% saved vs. recommended price)

Backordered

%
Philippi - Print button WT22RG "Hupe"
Philippi - Print button WT22RG "Hupe"
Two-tone light-light stainless steel pressure button with laser-cut symbol.As a result, the symbol itself is also illuminated and cannot be removed.Protection class IP67 for external assembly.Electricity load capacity of DC 5 A. Installation diameter 22 mm, thread length 10 mm for panel thickness up to 6 mm.Delivery with plug -in connection cable 20 cm and with silicone cap to protect against mechanical blockages due to salt water crusts.Both LEDs can be controlled without potential (e.g. night lighting red + function lighting green).

€23.40* €24.90* (6.02% saved vs. recommended price)

Backordered

%
PHILIPPI - Drucktaster WT19RG
PHILIPPI - Drucktaster WT19RG
Druckschalter zweifarbig rot / grün beleuchtbar. Schutzart IP67 für die Außenmontage. Einbauloch-Durchmesser 19 mm, für Paneldicke 1-6 mm. Die LEDs können direkt an die Versorgungsspan_x0002_nung DC 12/24 V angeschlossen werden. Strombelastbarkeit Schaltkontakt NO/NC: 5 A. Lieferung mit steckbaren Anschlusskabel 20 cm und mit Silikonkappe zum Schutz gegen mechanische Blockaden durch Salzwasserkrusten.

€21.90* €22.90* (4.37% saved vs. recommended price)

Backordered

%
PHILIPPI - Drucktaster WT22RG „Batterie“
PHILIPPI - Drucktaster WT22RG „Batterie“
Two-tone light-light stainless steel pressure button with laser-cut symbol.As a result, the symbol itself is also illuminated and cannot be removed.Protection class IP67 for external assembly.Electricity load capacity of DC 5 A. Installation diameter 22 mm, thread length 10 mm for panel thickness up to 6 mm.Delivery with plug -in connection cable 20 cm and with silicone cap to protect against mechanical blockages due to salt water crusts.Both LEDs can be controlled without potential (e.g. night lighting red + function lighting green).

€22.40* €23.90* (6.28% saved vs. recommended price)

Backordered

Joystick / Coordinate button Y-axis
Joystick / Coordinate button Y-axis
Plastic housing, push-button mm with black Gummikappe.Einbau for wall thickness to 9, hole diameter 22.5 mm.

€25.40*

Backordered

%
PHILIPPI - Druckschalter WS22RG „Licht“
PHILIPPI - Druckschalter WS22RG „Licht“
Two-colored light stainless steel pressure switch with laser-cut symbol.As a result, the symbol itself is also illuminated and cannot be removed.Protection class IP67 for external assembly.Electricity load capacity of DC 5 A. Installation diameter 22 mm, thread length 10 mm for panel thickness up to 6 mm.Delivery with plug -in connection cable 20 cm and with silicone cap to protect against mechanical blockages due to salt water crusts.Both LEDs can be controlled without potential (e.g. night lighting red + function lighting green).

€23.40* €24.90* (6.02% saved vs. recommended price)

Backordered

%
PHILIPPI - Drucktaster WT22RG „Auf/Ab (Pfeil)“
PHILIPPI - Drucktaster WT22RG „Auf/Ab (Pfeil)“
Two-tone light-light stainless steel pressure button with laser-cut symbol.As a result, the symbol itself is also illuminated and cannot be removed.Protection class IP67 for external assembly.Electricity load capacity of DC 5 A. Installation diameter 22 mm, thread length 10 mm for panel thickness up to 6 mm.Delivery with plug -in connection cable 20 cm and with silicone cap to protect against mechanical blockages due to salt water crusts.Both LEDs can be controlled without potential (e.g. night lighting red + function lighting green).

€23.40* €24.90* (6.02% saved vs. recommended price)
This website uses cookies to ensure the best experience possible.