Bootszubehör - Nützliche Dinge für den Bordalltag

This Seilflechter braided with the sheet TORNADO 24-fold, Seilflechter expanding its existing range to another line. Here are still the breaking load and low stretch in the foreground. In addition, this case will get an improved Griffigkeit.Somit the tornado line is also suitable for sheets.Available diameter: available on request in the following diameters: mm 6, 8 mm, 10 mm, 12 mm.Colors available on request: neon yellow, gray, orange.The breaking strength of the rope depends on the diameter and is:6 mm - 1050 daN8 mm - 2.200 daN10 mm - 2.900 daN12 mm - 4800 daNdaN means deca Newton and referred the breaking strength.Example: 100 daN correspond to a breaking load of approximately 100 kg.Precise: In order to raise a body with the mass of 100 kg is needed in the world, a force of 102 daN, this is calculated by the gravitational acceleration of 9.81 m / qs.Prices are for cuts per meter. Special rates for all rings or rolls are available. If necessary, just ask the required amount. Usually there are 25% discount for all coils.

LAGUN - Ausgleichskeil

Matching Seaview SAIL and top-Pods are available for almost all instruments and multifunction displays. The fronts of the uncutSeaview Pods is simply provided for the assembly of the display device with the appropriate cut-outs.The Sailpods are designed for mounting on the bracket of the steering column. The shape of the back of the can suppliedStainless steel brackets are mounted in unterschiedlichster position. The Sail-pods can thus the optimum viewing angle for helmsmanbe mounted and fit bracket who do not have the standard pipe distance.The Power Pods are provided with a solid anodized aluminum base. The pod is rotatably mounted on the foot and with a sturdyDetent provided.With the optional instrument pod all SAIL and power pods can be on both sides extended by an additional instrument.- Housing made of UV-resistant ABS plastic- Waterproof rubber seals- GORE ™ valve for pressure equalization- Stainless steel screws with anti-theft protection- Sail-Pod can be adjusted individually mountable bracket in the tilt- Power pod can be rotated on the stand to 350 °- Optional extension with instruments pod (Art SP1BOX)WITHOUT delivery the items shown, they are NOT included!External dimensions (WxHxD): 313 x 192 x 129 mmUsable area (W x H): 298 x 178 mmMaximum possible cut-out (WxH): 279 x 156 mmMaximum possible inclination: 26 ° upward to 12 ° downward

Silikon Dichtstoff für Fenster - 300 mlPCW14 ist eine hochwertige Versiegelung für alle Arten von Fenstern und Scheiben aus Polycarbonat, Acryl oder Glas.PCW14 verursacht an vorgespanntem Acrylglas ( Plexi) und Polycarbonat ( Makrolon, Lexan) keine Spannungsrisse.Es wird primerlos, ohne Grundierung auf Holz, Metall und GFK verarbeitet.PCW14 ist ein extrem UV-beständiges, sehr langlebiges Marine-Silikon.Es ist geruchsarm, nicht überstreichbar und sehr farbbeständig.PCW14 ist geprüft und zugelassen zur Verarbeitung mit PLEXIGLAS-XT und hat die Prüfung nach IMO MareED erhalten.Basis: Polysiloxan - SilikonVernetzung: FeuchtigkeitshärtendHautbildung: 10-20 MinutenAushärtung ( 23°C/50% RF):ca. 2mm/ 24 hHärte ( Shore A): 20-25Dichte: 1,03 g/mlRückstellvermögen ( ISO7389): > 80%Zugfestigkeit ( ISO37): 1,50 N/mm²Bruchdehnung (ISO37): > 600%Verarbeitungstemp : 5°C - 35°CTemperaturbeständigkeit: - 40°C - 180°C • Extrem UV Beständig• Sehr gute Haftung auf PVC, Acryl, Polycarbonat & Glas• Sehr gute Haftung auf Holz, Metall & GFK• Kein Primer• Nicht überstreichbarFarbe: schwarz

Matching Seaview SAIL and top-Pods are available for almost all instruments and multifunction displays. The fronts of the uncutSeaview Pods is simply provided for the assembly of the display device with the appropriate cut-outs.The Sailpods are designed for mounting on the bracket of the steering column. The shape of the back of the can suppliedStainless steel brackets are mounted in unterschiedlichster position. The Sail-pods can thus the optimum viewing angle for helmsmanbe mounted and fit bracket who do not have the standard pipe distance.The Power Pods are provided with a solid anodized aluminum base. The pod is rotatably mounted on the foot and with a sturdyDetent provided.With the optional instrument pod all SAIL and power pods can be on both sides extended by an additional instrument.- Housing made of UV-resistant ABS plastic- Waterproof rubber seals- GORE ™ valve for pressure equalization- Stainless steel screws with anti-theft protection- Sail-Pod can be adjusted individually mountable bracket in the tilt- Power pod can be rotated on the stand to 350 °- Optional extension with instruments pod (Art SP1BOX)WITHOUT delivery the items shown, they are NOT included!External dimensions (WxHxD): 313 x 192 x 129 mmUsable area (W x H): 298 x 178 mmMaximum possible cut-out (WxH): 279 x 156 mmMaximum possible inclination: 26 ° upward to 12 ° downward

Matching Seaview sail and deck pods are available for almost all instruments and multifunction displays.The uncut fronts of the Seaview Pods are simply provided with the appropriate cutouts for the installation of the display device.The sail pods are intended for assembly on the temple of the control column. By shaping the back, the supplied stainless steel brackets can be installed in a wide variety of positions. The sail pods can thus be an optimal angle of reading to the rowerbe assembled and fit for brackets that do not have the standard pipe spacing.The power pods are provided with a solid anodized aluminum foot. The pod is stored on the foot and provided with a robust lock.With the optional instrument pod, all sail and power pods on both sides can be expanded by an additional instrument.-Housing made of UV-resistant ABS plastic- Waterproof rubber seals- Gore ™ valve for pressure compensation- stainless steel screws with theft protection- Sail pod can be adjusted by individually assembled bracket in the inclination- Power pod can be rotated by 350 ° on the base-Optionally expandable with instrument pod (item no. SP1box)Scope of delivery without the instruments shown, they are not included!External size (WXHXT): 362 x 241 x 131 mmUsable area (BXH): 349 x 229 mmMaximum possible neckline (BXH): 329 x 206 mmMaximum possible inclination: 32 ° up, 30 ° downwards

Capacity 15-20 litersSimply filled solar shower in the sun hang or place on deck.After about 2 - 3 hours, a water temperature of about 30 - 40 degrees C erreicht.20 liters! Enough for about 5 minutes showers.

This rope -lichen Novoleen Tauwerk is ideal for use as a trap or pods, and has been very well proven for many years.The core of high -strength Novolenen fiber is braided. This achieves a very low stretch.Different coloring can clearly differentiate the dew.Structure: Kern Novolenen braided, 32-fold upheaval.Properties: Soft supple case, which is characterized by low stretching, very good abrasion resistance and high fracture load.Available colors: also available in the following colors on request:White-red, white-blue, red-green, red-blue, blue-red, black and red, uni-blackAvailable diameter: On request, also available in the following diameters:1 mm, 1.5 mm, 2 mm, 3 mm 4 mm 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16mm, 18 mmThe fracture strength of the dew is dependent on the diameter and is:1 mm - 60 Dan1.5 mm - 150 Dan2 mm - 255 Dan3 mm - 380 Dan4 mm - 460 Dan5 mm - 1000 dan6 mm - 1800 Dan8 mm - 3200 Dan10 mm - 5000 Dan12 mm - 6100 Dan14 mm - 7800 Dan16 mm - 11580 Dan18 mm - 14900 DanDan means Deka Newton and denotes the breaking strength.Example: 100 dan corresponds to a break load of approximately 100 kg.Precise: To raise a body with the mass of 100 kg, you need a force of 102 dan on earth.This is calculated by accelerating the earth of 9.81 m/QS.The prices are given for cuts per meter. Special prices for entire rings or roles are available. If necessary, simply ask the required amount. Discount of 10 % with ≥ 50 m and 15 % when decreasing ≥ 100 m. The discount is automatically taken into account when determining the price.

The seaEQ dock fenders protect your boat from damage. When contact is made with the dock, the contact is significantly dampened by the dock fender, preventing damage to the boat. When in contact with the boat fender, the boat can SLIDE and is NOT STOPPED. This keeps you manoeuvrable. The intricate internal construction of the DF boat fender, provides optimum protection when in contact with the hull and also absorbs hard impacts. The seaEQ-DF fender stay is mounted on the jetty, on the pier (fastening material not included). There are openings on the back of the seaEQ-Dock fender which allow flexible fastening with screws or e.g. cable ties. The screws disappear behind the straps of the dock fender.Order an additional mounting set? You will find everything you need under the heading Accessories/Spare Parts! Variants: (LxWxD): DF 40/10 400*100*30mmVariants:DF 40/10 400*100*30mmDF 80/10 800*100*30mmDF 110/10 1100*100*30mmDF A 20/10 200*100*30mm (Dock Fender Angle, corner variant)DF B 110/20 1100*200*80mm (Dock Fender Bow, bow)DF M 110/60 1100*600*30mm (Dock Fender Mat, Matte)Colours:blackdeep-blueshark-greyMaterial:The stay fender is made of a closed cell polyethylene foam with synthetic fibre coating, the back is made of a heavy PVC.Features:Easy installation (fixing material not included).Optimal protection for your boat and yacht.The boat is NOT STOPPED, it GLIDES and REMAINS CONTROLABLE.The mooring can be completely secured, providing perfect protection for the hull of the boat.Mounting tips:There are various openings on the fenders of the seaEQ-DF series, which are covered by a circumferential webbing. To mount, lift the webbing, mark the places where you want to attach the DF and pre-drill the holes. Now screw the fender to the stay at the desired location. Use aluminium rings / washers to prevent the screws from slipping (see DF assembly set). After screwing, press the webbing down. Now the screws are covered and your boat is protected.If you want to mount your fender flexibly or if it is not allowed to screw it down at the jetty in your harbour, the fenders of the DF series can also be mounted with cable ties. All fenders are provided with double holes for this purpose. Ask your harbour master before mounting. Under the heading Accessories / Spare parts you will find seaEQ mounting sets for fixed or flexible mounting.To preserve the colours for longer, store the fender out of sunlight after the season. seaEQ fender systems are easy to handle, flexible to use and extremely robust.Made in Germany."

The BF 2/38 bow fender is foldable and protects your boat from damage, e.g. when entering the berth. At the side straps the bow fender can be easily fixed by a line. The boat fender for the bow also protects a stronger impact through its integrated Protector mats. The bow fender also protects against damage from a dropping anchor, or an anchor that is being lifted. A folded boat fender is easy to store. The boat fender for the bow has a very small pack size and is very light.The heavy, highly tear-resistant polyester fabric ensures a long service life of the fender. The strong and firm PE core provides contact damping on contact, reinforced with Protector mats.The seaEQ bow fender is available in 2 sizes and 3 colors. Variants: BF 2/38 (approx. 250mm leg dimension, approx. 400mm high).BF 2/68 (approx. 250mm leg dimension, approx. 700mm high)colors:black, deep-blue , shark-greyFeatures:Your boat is excellently protected. Easy to install.Optimal bow protection.Especially safe due to PE and PVC reinforcement.Space-saving because foldable.The seaEQ bowfender is made of high-strength, heavy polyester fabric. The side facing the yacht is PVC coated. The core consists of a special, high-strength PE foam, through a PVC reinforcement puncture-proof. The seaEQ boat fender for the bow is completely sewn around with PP straps for stability.To keep the colors longer, after the season store all fender systems protected from sunlight. There are no metal objects on all seaEQ fender systems.seaEQ fender systems are easy to handle and flexible to use.All materials come from Europe.Made in Germany"

The seaEQ fender mat is attached to the railing with the fender lines. Due to the incorporated rubber mat, this boat fender has a good own weight to be placed well on the hull. At the same time, the cushion fender is very thin and easy to store and is also rollable. The boat fender protects your boat from unnecessary damage and scratch marks, e.g. by pendulous fenders. You can use the flat fender wherever boat fenders can move on the hull and thus scratch or scuff marks on the hull can occur. The lightweight, tear-resistant polyester fabric provides a long life for the flat fender and offers little resistance to the fenders. The PU-coated inside FPM protects the hull of your boat. The 4mm cellular rubber core provides protection and flexibility.There are 3 different colors of seaEQ fender protection mat: white, deep-blue, black.Variants: FPM 2100*