Victron - MultiPlus 24V DC

Der Victron MultiPlus Compact kombiniert einen leistungsfähigen Wechselrichter mit einem intelligenten Batterieladegerät in einem kompakten Design. Ideal für US-Standardspannungen (120 V), kann er in netzunabhängigen Systemen oder in Kombination mit einer Stromquelle eingesetzt werden. Der schnelle Umschalter sichert eine unterbrechungsfreie Stromversorgung. Technische Daten:- Maße: 362 x 258 x 218 mm- Gewicht: ca. 11 kg- Nennleistung: 2000 VA- Ladeleistung: 50 A

A multiplus, plus ESS (Energy Storage System) functionThe multiplus II is a multifunctional inverter/charger with all functions of the Multiplus and an additional function, namely that of an external current sensor.As a result, the functions PowerControl and Power Assist are expanded to 50 A or 100 A.The Multiplus-II is ideal for professional seafaring, yachts, vehicles and land-bound, removable applications.The device also has a built-in anti-Icelanding function and is receiving approval for an eating application in more and more countries.Several different system configurations are possible. You can find more information in the ESS manualDesign & configuration.PowerControl and power assist- increase in network or generator performanceA maximum network or generator current can be set.The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”.This prevents the generator or the network connection from being overloaded (PowerControl function).With the power assist function, the PowerControl principle receives a new dimension.Load tips often only occur for a limited period.In such a case, the multiplus-II compensates for the weak generator, land electricity or network performance immediately through energy from the battery.The load is reduced, i.e. H. If consumers are switched off, the energy that is then sufficiently existing can be used again to load the batteries.Solar power: alternating current also in the event of a network failureThe Multiplus-II can be used in both non-linked and network-coupled PV systems as well as with other alternative energy systems.It can be used with both solar charging regulators and with network-bound inverters.Two alternating current outputsThe main exit ensures uninterrupted operation.In the event of a network failure or if the land/generator current is interrupted, the multiplus-II takes over the supply of the connected consumers.Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed.The second output only provides electricity when the multiplus II alternating current is available.Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output.Practically unlimited performance through parallel and three-phase operationUp to six multis can be switched in parallel with high power requirements.For example, this results in 25 kW/30 kva output power with 420 A charging capacity at six 48/5000/70 units.Apart from the parallel connection, three units of the same model can also be configured for a three-phase output.However, this is not enough: by switching up to 6 sets of three devices each, 75 kW/90 KVA inverter or 1200 A charging current is obtained.System configuration, monitoring and control on siteThe settings can be changed with the Veconfigure Software within a few minutes (a computer or laptop and an MK3 USB interface are necessary).Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle), battery guard, digital multi operating panel .Configuration and monitoring remotelyInstall a Color Control GX or other GX products to connect to the Internet.The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website.If systems are connected to the Internet, you can access them from a distance and settings can be changed.Multiplus-II 24/3000/70-32PowerControl & Power Assist: YesTransfer switch: 32 aMaximum AC input current: 32 aInverterDC input voltage area: 19-33VOutput output voltage: 230 VAC ± 2 %Frequency: 50 Hz ± 0.1% (can be adapted to 60 Hz)Account. Output power at 25 ° C (non -linear load, peak factor 3: 1): 3000 VAAccount. at 25 ° C: 2400 WAccount. at 40 ° C: 2200 WAccount. at 65 ° C: 1700 WMaximum obvious feed -in performance: 2500 VATop performance: 5500 WMax. Effect: 94%Zero load performance: 13WZero-load performance in AES mode: 9WZero-load performance in search mode: 3WCHARGERAC input input voltage area: 187-265 VACInput frequency: 45 - 65 Hz"Constant" charging voltage (absorption): 28.8 V"Conservation" charging voltage (float): 27.6VStorage mode: 26.4VMaximum battery charging current (at 25 ° C ambient temperature): 70ABattery temperature sensor: YesGeneralAdditional outcome: yes (32 a)External AC stream sensor (optional): 50 aProgrammable relay (*): YesProtection (2): Output ceiling, overload, battery voltage too high, battery voltage too low, temperature too high, 230 VAC at the inverter output, too high humming voltage at the inputVe.Bus interface: for parallel and three-phase operation, remote monitoring and system integrationCom port for general use: yes, 2xRemote-controlled input/output: YesOperating temperature range: -40 to +65 ° C (blower ventilation)Moist (not condensing): max. 95 %Housing material & color: steel, blue RAL 5012Protection class: IP22Battery connection: M8 bolts230 V AC Connection: screw terminals 13 mm² (6 AWG)Weight: 18 kgDimensions (HXBXT): 506 x 275 x 147mm*) Relays adjustable as a general alarm relay, DC under-voltage alarm or start / stop function for an aggregate AC. Nominal power: 240 V / 4 A DC nominal value: 4 A up to 35 VDC and 1 A up to 60 VDCFigure similar

The Multiplus is a powerful inverter with a pure sinus wave, an advanced battery loader that uses adaptive charging technology, and a high-speed change voltage transfer switch in a single compactHousing. Apart from these primary functions, the Multiplus also offers several extended functions, which are explained below.Two alternating current outputs: The main exit ensures uninterrupted operation. In the event of a network failure or if the land/generator current is interrupted, the Multiplus takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if there is an alternating current available on one of the inputs of the Multiplus AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output (a second output is only available for models with an output power of 3000 VA and more).Practically unlimited performance through parallel circuit: up to six multis can be switched in parallel with high power requirements.Three phase operation: Apart from the parallel connection, three units of the same model can also be configured for a three-phase output.PowerControl: Working with limited generator performance, limited land or network current. With the remote control panel Multi Control, the maximum network or generator current can be set. The Multiplus then takes into account other connected alternating current consumers and only uses the electricity that is still "left". This prevents the generator or the land power connection from being overloaded.Power Assist: With this function, the PowerControl principle receives a new dimension. It enables the multiplus to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Multiplus ensures that too weak land electricity or generator output is immediately compensated for by energy from the battery. The load is reduced, i.e. H. If consumers are switched off, the energy that is then sufficiently existing can be used again to load the batteries.Four-stage adaptive charger and loading of two batteries: The main output using the advanced "adaptive charging" software ensures that the battery system is powerful. Another fourth stage for long periods of time in conservation mode. Apart from that, the Multiplus also loads a second battery by using an independent maintenance load output (conservation load output only available from 12 V and 24 V models). If settings have to be changed, this can be changed within of a few minutes using the new DIP switch setting process.Multi Plus- Battery voltage 24 V: C 24/2000/50-30- Power Control / Power Assist: Yes- Transfer switch: 30 a-Parallel circuit and three-phase operation: Javerwichter- Input voltage area: 19–33 V (V DC)- Exit: output voltage: 230 V AC ± 2%, frequency: 50 Hz ± 0.1%- Kont. Output power at 25 ° C: 2000 VA **- Kont. Output power. at 25 ° C: 1600 W- Kont. Output power. at 40 ° C: 1450 W- Top performance: 4000 W- Max. Effect: 94 %- Zero-load performance: 11 W-Zero-load performance in AES mode: 9 W-Zero-load performance in search mode: 4 wladitor-AC input: Input voltage area: 187-265VAC, input frequency: 45–65 Hz / performance factor: 1- Constant charging voltage: 28.8 V DC- Conservation charging voltage: 27.6 V DC- Storage mode: 26.4 V DC- charging current house battery: 50 a- Charging current starter battery: 4 a-Battery temperature sensor: YesGeneral- Additional outcome (A): No- Programmable relay: relay adjustable and a. As an alarm relay or start- / stop function for an aggregate-Protection: output ceiling, overload, battery overvoltage, battery sub voltage, over temperature, 230 V AC at the inverter output, too high humming voltage at the input- Ve. Bus interface: for parallel circuits and three-phase operation, remote monitoring and system integration- Com port for general use: no- Common features: operating temperature range: -20 to +50 ° C (blower testing), protection class: IP21- Battery connection: M8 bolts- 230 V AC connection: Spring hanger- Weight: 18 kg- Dimensions (HXBXT): 520 x 255 x 125 mm** Nonlinear Last, top factor 3: 1

Die UL-zertifizierte Version des MultiPlus 24/3000/70-50 bietet dieselbe Leistung wie die Standardausführung, jedoch speziell für den US-amerikanischen Markt.Technische Daten:Ausgangsleistung: 3000 VAGewicht: 13,5 kg

Dieser Wechselrichter und Ladegerät kombiniert fortschrittliche Ladefunktionen mit einem robusten Design für große Anlagen. Dank der PowerAssist-Technologie kann der MultiPlus-II Netzlasten ausgleichen und bei Spitzenlasten unterstützen. Technische Daten:- Maße: 506 x 275 x 147 mm- Gewicht: 15 kg- Nennleistung: 3000 VA- Ladeleistung: 70 A

Der MultiPlus 24/3000/70-50 für 24V-Systeme ist für hohe Leistungsanforderungen ausgelegt und bietet eine flexible Stromversorgungslösung, besonders für größere Solaranlagen oder netzunabhängige Anwendungen.Technische Daten:Ausgangsleistung: 3000 VAGewicht: 13 kg