Zubehör für Wetterinstrumente von NASA Marine

NASA - Befestigungsknopf Nasa Gewinde M6

Power cables for all NASA marine weather decoder and navtex devices, AIS em-catchers and wireless wind interface.

NASA - HF3 flush mount kit incl. ext. Speaker

Replacement battery/battery for soldering on the circuit board

Suitable for all NAVTEX receiver NASA MARINE with two receiving frequencies:- Target Navtex Pro Plus from model year 2002- Clipper Navtex (Dual Channel Receiver)- PC Navtex Pro 2- Easy navtexImportant note: selecting the right replacement antenna for Clipper Navtex:With the caption '' Clipper Navtex '' are the manufacturer real NAVTEX receiver and devices with the Empangsfrequenz delivered 147.3 kHz! In addition to the receivable messages the rating plate is on the back of the device information about the actual function of the device.The antenna is supplied with a permanently connected, about 6.5 m long antenna line with coax connector (Type-Belling Lee).

Conventional navtex antennas respond to the connected to the electrical component navtex radio signal. This usually works at sea, where electrical noise is low, very good, but in the port and near the shore, the signal is often suppressed by interference.In most pleasure boats, the electrical system acts as an effective ground for the antenna, but it can also be a source of interference be caused by other electrical equipment on board. Electrical noise may cause a bad reception. Especially in marinas where noise sources can interfere with the reception in the area or at sea, if poorly unsuppressed electrical appliances are in use.The omnidirectional antenna H-vector is not sensitive to electric fields, but receives the magnetic component of the navtex signal. As a result, it is less sensitive to locally generated interference, whether in port or at sea.The result is that, under unfavorable conditions, the H-vector antenna a significant improvement in navtex reception can deliver. The mushroom-shaped antenna is compatible with the Clipper navtex, target navtex series 2 and the Easy navtex.The antenna can (1 "/ 14TPI, not included) with a standard antenna on the cabin roof or the tail basket to be mounted.Suitable for all NAVTEX receiver NASA MARINE with two receiving frequencies:- Target Navtex Pro Plus from model year 2002- Clipper Navtex (Dual Channel Receiver)- PC Navtex Pro 2- Easy navtex- connecting cable, length 7 m- Suitable for mounting on antenna feet with 1 "/ 14 T.P.I. standard thread

3-pin plug,fits as NMEA cable for Nasa AIS and Meteoman

Suitable for all Navtex recipients of NASA Marine with just one reception frequency:- Target Navtex per to model year 2001- Target Navtex Standard- Video NavtexThe antenna is supplied with a firmly connected, approx. 6.5 m long antenna line with coax connector (Type Belling-Lee).

NASA - antenna base / foot for rod antennas

Suitable for all DWD weather receivers of NASA Marine with the reception frequency 147.3 kHz:- Target 147- Clipper (Navtex) 147Important note: Selection of the right replacement antenna for Clipper Navtex:With the lettering '' Clipper Navtex '', the manufacturer supplies real Navtex recipients and devices with the empathetic frequency 147.3 kHz! In addition to the receiving messages, the type sign on the back of the device provides information about the actual function of the device.The antenna is supplied with a firmly connected, approx. 6.5 m long antenna line with coax connector (Type Belling-Lee).

Pulpit holder made of plastic for NASA rod antennasDelivered without antenna

Ersatzakku zum Auflöten auf die Leiterplatte

Ein sinnvoller Artikel aus der Warengruppe NAVIGATION

for NASA echo sounder and log,and antenna cables of NASA weather and NAVTEX receivers,Length: m. 7

NASA - top / plastic hood

NASA - Target Navtex Achterstagkoppler

Practical advanced bracket for elegant wall or table mounting, swiveling.By using this elegant holder made of resistant plastic, no assembly section is required for the device.Suitable for:- NASA AIS- Nasa Weatherman- NASA Clipper Weather Deport- NASA Clipper Navtex devices- NASA Meteoman weather station-NASA MOBI Mann-ü-Bord-indicatorDelivery without the device shown!

NASA - NMEA Adapterkabel für Nasa Tochteranzeige

NASA - N147 Wetter Achterstagkoppler