fastening angleLight AIS antenna with a steel whip stick and low-knob arm.Length: approx. 1,000 mm,Weight: approx. 265 g.Especially compared to the AIS frequencies. Suitable for most AIS recipients and class B AIS transponders.With PL connector connection

- Material: water resistant fiberglass tube- Color white- connection via cable connector PL 259- Frequency range: 156-162 MHz- deck mounting- Gain 0 dB. Closed DC (i.e., constructive measure to reduce discharges. An integrated into the antenna circuit, the antenna for direct currents represents a short circuit)- Length: approximately 0.25 m- Weight: 0.1 kgMounting flange and PL-plugs are included!

fastening angleLight AIS antenna with a steel whip stick and low-knob arm.Length: approx. 1,000 mm,Weight: approx. 265 g.Especially compared to the AIS frequencies. Suitable for most AIS recipients and class B AIS transponders.With 22 m antenna cable RG58 and PL connector

For connecting to the laptop, on-board PC or suitable card plotersThe AIS Engine 3 is suitable for use with AIS-capable card plotters with NMEA0183 input and can be used with the navigation software of leading manufacturers.The device receives the AIS data of all ships equipped with AIS transmitted devices. The data received is converted into the NMEA format and output via the RS232 interface.The objects are shown on the screen depending on the software used. The location of the in -depth professional shipping is clear and unambiguous.With just one glance you can determine whether there is a risk of collision.In addition to the pure position data of the ships, further information such as the speed about the ground, the ship's name, the MMSI number as well as course and speed are received and displayed depending on the software used.The AIS Engine 3 is supplied with a freeware version of the "Seaclear" navigation software. The Seaclear Software offers the possibility to display objects received via AIS in a seaboard (not included).

The device is characterized in addition to its activity AIS receiver with integrated 2-channel receiver for simultaneous reception of the two AIS frequencies by its array of connectors.Per WiFi the received AIS data can be transmitted to a mobile terminal. By means of an AIS-compatible app that can be displayed on the navigation here.Thanks to the HDMI connection, a large screen or a TV set can be used for display. An integrated AIS software raspAIS processes the data accordingly.A mobile terminal can also be used without AIS-compatible app for display. With a free app, it is possible to mirror the display on the mobile device. These only IP and port information must be entered in the raspAIS mobile device.Based on a powerful Raspberry Pi® it is possible also to use the raspAIS as a multimedia center on board. Many USB ports allow the use of USB mass storage devices with video, audio and image files. In addition, the raspAIS has a 3.5 mm AUX-out jack to use headphones.product Highlights- 2-channel receiver for both AIS frequencies- connection for mobile AIS antenna- connections for USB, LAN, HDMI and 3.5 mm jack for audio out- WiFi and Bluetooth connection possible- pre-installed software AIS "openPlotter" with operating system- Based on Raspberry Pi 3B ® Model B- Handy size: 85 * 56mm- Lightweight: 150 gr- External GPS source is required (GPS antenna or GPS function on the mobile device) Scope of delivery:RaspAIS consisting of:2-channel AIS receiver moduleBNC antenna socketRaspberry Pi 3 Model BMicro SD card (16GB) with operating system and navigation softwarecasingCable: Micro USB to USBFM antenna (162 MHz) with magneticGPS USB Stickoperation manualNote: No power supply enclosed!

Save the hassle of installing a costly second antenna and use your existing single antenna with VHF / AIS / FM, by enlisting the lightweight, compact NSPL 500 antenna splitter. When combined with the NAIS 500 AIS system, you can see and be seen on the water, Whether tackling busy shipping lanes or crowded ports.- FM connector for SonicHub ™ 2 or any compatible stereo FM unit.- Weight 260 grams.- Waterproof IPX7 standard.- Low Power Consumption, average power consumption of less than 150 mA at 12 V DC.- Suitable for 12 or 24 V DC system with a wide range of supported input Voltages from 9.6 V to 31.2 V DC.High Performance with Low LossThe NSPL 500's high-performance design means no insertion loss on AIS and VHF receive, and low insertion loss on AIS and VHF transmit.

Stainless steel angle, suitable for direct intake of the in Art.-No.1926601 (old: 87195),1317301 (old: 7500),1343701 (old: 87192) and1874401 (old: wibal)Antenna included.Delivery takes place with counter mother to fasten the antenna.

With this cable you can connect your AIS ClassB transmitter / receiver easyTRX2S with integrated splitter (IS) to your VHF radiotelephone.RG213-assembled cable connectors 2 PLfor e.g. Duplexer AIS splitter AIS-transponderLength about 1.8 m

With this cable you can connect your AIS ClassB send/recipient to your VHF radio radio with integrated splitter (IS).Mottled RG213 cable with 2 PL plugsFor e.g. duplexers, AIS splinters, AIS transpondersLength approx. 1 m

Small magnetic active patch GPS antenna with waterproof housing for assembly on dashboard,Windshield or metallic surfaces. Size: 40 x 50 x 12.5 mm, cable length: 2.5m with FME connector;Contents: cleaning cloth, BNC-FME adapter, metal adhesive pad, mini GPS antenna

V5035 AIS 37pin Cable - Data cable from AIS Main unit to Junction Box.

The VHF MARINE KIT contains a B & G - V60-B FM radio system with AIS transponder & int.GPS and a matching external GPS antenna GPS-500The external antenna is e.g. required in the installation on steel or Aliminiumschiffen or ships with carbon fiber laminate.With this VHF marine radio with AIS transceivers Class B and integrated GPS are on the move on the water always safe.Thanks to the integrated AIS transceiver Class B you can see equipped with AIS vessels in the area and be seen by them.You can also add up to two optional wireless handsets to stay anywhere on board in conjunction.Main features:- Integrated AIS transceivers Class B- VHF DSC Class D certification- Integrated GPS receiver- Detachable handheld microphone supports connection to front or back- Connect to wireless to two handsets- Add optional add a megaphone or an external speaker- NMEA 2000® 0183®- and NMEA connectivityOptimum visibility thanks to the integrated AISThe RS40-B includes an AIS transceiver Class B, which not only receives AIS targets, but also the position of your boat with AIS equipped ships in the vicinity sends.So that others can see your boat under all conditions, day and night.An integrated AIS receiver monitors the position of other AIS vessels to avoid collisions proactive in crowded ports and on busy waterways.AIS information can be displayed on the integrated display of the radio or displayed on a compatible multifunction display on the chart or radar screen.Detachable hand-held microphoneThe detachable hand microphone of the V60-B can be connected to the front or the back of the radio.The optional extension cord allows the separate installation of radio and microphone.The result is a simple and affordable solution for every installation and clutter free.For example, the V60-B can be mounted above the head without hanging cable, while the microphone is connected to a power strip down on the control panel.expandable with wireless handsetsAdd an optional wireless HS40 handset to take to your radio anywhere on board.Each handset duplicates the display and controls your radio so that the remote access possible to all key functions is.To a single V60-B can be connected up to two handheld devices.If several handsets are connected, the radio also acts as an intercom system on board.!!! minimum requirements for the product !!!FM antenna required for wireless (sold separately).For the AIS function is either a second FM antenna or VHF / AIS antenna splitter required!AVAILABLE FROM MIDDLE Expected in August 2019!

The easyTRX2S received Class A and Class B AIS signals and send the data your vessel according to the Class B standards. The devices interpret the incoming data and so have an independent CPA by the plotter alarm. The easyTRX2S have an SD card recorder, with which all data similar to a "black box" can be recorded. let separate harnessesto options such as "Silent Mode" or "PAN PAN" will enable via toggle switch.Common features of all models:- transmitting and receiving devices - Class B (for example, sport boats)- additional USB output- independent of the plotters CPA alarm possible- SD Card Recorder for "BlackBox" use- integrated multiplexer, connecting three devices with different baud rates- Connection for external signal generator for CPA and AIS S.A.R.T. alarm- separate cable for "Silent Mode" or emergency message type "PAN PAN"- NMEA0183 Baud rate: 38400 or 4800 baud selectable via software- Incl. PC software also used to display AIS data on the PC- A total of 8 LEDs for function display- BSH certified (BSH / 46162/4320939/10)- board power supply: 10 V 32 V DC- dimensions (LxWxH): 198 x 158 x 47 mmPorts (depending on model):- FM antenna terminal PL (SO239), 50 Ohm- FM radio PL (SO239), 50 Ohm- Connection GPS antenna, 50 ohms, BNC to TNC adapter- Radio, BNC, 50 Ohm- DVB-T, BNC, 50 Ohm- NMEA2000, Micro-C, MaleeasyTRX2S-ISAIS transmitter / receiver Class B, integrated antenna splitter

Reduce the risk of collisions with the NAIS-500.AIS is a new type of security equipment that helps you to fore and be seen at sea.AIS focuses on all ships near you and helps to reduce the risk of collision through data exchange between the ships.-Black box class-B AIS transponder (AIS transmitter/recipient) system-Nmea-20000 and NMEA-0183 (high speed) interface, USB interface-Multiplex input for grinding and using NMEA0183 Data with 4800 Baud-USB port for programming the device and connecting a navigation PC-GPS antenna included-1.8 m NMEA2000 sinking line and T connector included-It supply 9.6 - 31.2V DC, electricity consumption 170mA @ 12V-Dimensions (LXBXH): 152 x 100x 52mm, housing waterproof according to IPX7An ais transmission and reception antenna is required, B.Z.W. An antenna splinter and, if there is still no NMEA2000 installation, an NMEA2000 starter kit.

V5035 AIS Junction Box

BNC connecting cableMossified coaxial cable to connect an AIS recipient or Aistrupdern with an AIS/FM antenna system.Suitable for Easyais, Easytrx and all NASA AIS recipients in connection with the splinters Easysplit and Easysplit OCB.BNC connector on BNC plugs.Length 2 m.Excessive items, available as long as the stock lasts!

With this FM seaside radio system with AIS transceiver in class B and integrated GPS you are always safe on the water.Thanks to the integrated AIS transceiver of class B, you can see with AIS equipped ships in the area and be seen by them.In addition, you can add up to two optional wireless handheld devices to stay connected on board from anywhere.Main characteristics:- Integrated AIS transceiver of class B-FM radio with DSC approval class D- Integrated GPS receiver- Removable hand microphone supports connection to the front or back- Connect up to two wireless handheld devices- Add a megaphone or an external loudspeaker optionally- NMEA 0183® and NMEA 2000® connectivityOptimal visibility thanks to integrated AISThe RS40-B comprises an AIS transceiver in class B, which not only receives AIS goals, but also sends the position of their boat to ships equipped with AIS in the area.This allows others to recognize their boat under all conditions, day and at night.An integrated AIS receiver monitors the position of other AIS ships in order to proactively avoid collapse in overcrowded ports and on busy waterways.AIS information can be displayed on the integrated screen of the radio or displayed via a compatible multifunction display on the map or radar screen.Removable hand microphoneThe removable hand microphone of the V60-B can be connected to the front or back of the radio.The optional extension cable enables separate assembly of radio and microphone.This gives you a simple and inexpensive solution for every assembly location and without a cable clod.For example, the V60-B can be mounted above the head without hanging cables, while the microphone is connected to a socket strip at the bottom of the control panel.Expandable with wireless handheld devicesAdd an optional wireless HS40 handheld device to take your radio on board with you.Each handheld device duplicates the display and the controls of your radio device, so that remote access to all key functions is possible.Up to two handheld devices can be connected to a single V60-B.When several handheld devices are connected, the radio acts at the same time as an intercom on board.!!! !!! !!!The following antennas are required to operate the device:-VHF antenna for FM-Seefunk-VHF antenna for AIS reception and AIS transmitters-alternatively a suitable splitter (e.g. NAPL from Navico) to handle FM apparatus and AIS via a single antenna.-An external GPS antenna (GPS-500 from Navico) is required if the internal GPS antenna integrated in the radio has poor reception. For example, hidden installation or metal structures.!!! !!! !!!

Reduce the risk of collisions with the NAIS-500.AIS is a new type of security equipment that helps you to fore and be seen at sea.AIS focuses on all ships near you and helps to reduce the risk of collision through data exchange between the ships.-Black box class-B AIS transponder (AIS transmitter/recipient) system-Nmea-20000 and NMEA-0183 (high speed) interface, USB interface-Multiplex input for grinding and using NMEA0183 Data with 4800 Baud-USB port for programming the device and connecting a navigation PC-It supply 9.6 - 31.2V DC, electricity consumption 170mA @ 12V-Dimensions (LXBXH): 152 x 100x 52mm, housing waterproof according to IPX7An ais transmission and reception antenna, B.Z.W. An antenna splinter, a GPS antenna (GPS-500) and, if there is still no NMEA2000 installation, an NMEA2000 starter kit.

V0535 AIS GPS Antenna - 10m cable

A useful article from the group NAVIGATION

GPS antenna for use with the Easytrx and any other class B Aistruponder.Not suitable for use with AIS recipients, since the antenna does not provide NMEA position data.The GPS antenna is delivered with a 5m long cable.The cable can be easily extended up to a total of 15m with an Aircell 7 (or similarly good cable quality - please do not RG58).In addition to the GPS antenna, an AIS (VHF) antenna is also required for the operation of the AIS transponder.-Gps antenne: 5V DC-Connection: BNC connector-The delivery takes place with a plastic flange punch

(without GPS receiver)For AIS transponderParticularly compact GPS antenna for use with AIS transponders or GPS receivers.The only 8 cm long antenna in the lower part has a 1 '' /14T.p.i. Outside thread.Connection via N-socket, connection cable not included.Quadrifilar helix antenna, supply voltage 3? 6 V DC, power consumption 15 mA.

A useful article from the group NAVIGATION

V5035 AIS Pilot Plug