Victron - Phoenix - 1200-5000 VA

The ultra-fast transfer switch Filax was developed with the goal of sensitive electronics, such as switch computers or modern entertainment system from an AC power source to another. Main power source is typically the power grid, a generator or a land connection. As an alternative source, an inverter is used usually. With its switching time of less than 20 milliseconds even sensitive loads continue to work without interruption. The Filax is not adapted to domestic appliances, with a high power consumption, such as e.g. to provide washing machines or electric motors.230 V / 50 Hz, the maximum switching power 3500 W. dimensions (W): 200 x 120 x 75 mm.

Phoenix Inverter ControlThis control panel is suitable for Phoenix inverters equipped with a UTP remote monitoring and a socket for control panels. In addition, it can with a MutiPlus inverter / charger be used if indeed an automatic transfer switch function but no charger function is desired. The brightness of the LEDs is automatically reduced during the night. Dimensions (HxWxD): 65 x 60 x 40 mm.Only for the following models: 12/1200, 12/1600, 12/2000, 12/3000, 12/5000, 24/1200, 24/1600, 24/2000, 24/3000, 24/5000, 48/3000 and 48 / 5000th

The Phoenix Compact Inverter series has been developed for commercial use; it is suitable for a variety of applications. The development but without compromise on an inverter with clean sine wave output with high efficiency.A key feature is very high start performance. Phoenix inverters are capable of the high starting currents, for example, of refrigeration compressors, electric motors and similar appliances.Virtually unlimited power thanks to parallel and three-phase operation. Up to six inverter units can be connected in parallel for increased performance. Six 24/5000 units, for example, Make 24kW / 30kVA power. A three-phase operation is also possible.Computer Interfaces: All models have a RS-485 connection. All you need is our MK2 interface (see under accessories). This interface takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. An RS-232 to USB conversion cable is also available. With the VEConfigure software that is downloaded for free, the inverters can be adjusted according to requirements. This includes output voltage and frequency, the upper and lower voltage limits and the programming of the relay. The relay can, for example, for generating signals in special situations or can be also used to start a generator.- Phoenix Inverter Type: C24 / 2000- Parallel and 3-phase operation: Yes- Input voltage (VDC): 19-33 V- Output: Output: 230 V ± 2%, frequency: 50 Hz ± 0.1% (may also be set to 60 Hz, and 240 V)- output power at 25 ° C (VA) *: 2000- Ausgangsdauerleistungbei25 ° C (W): 1600- Ausgangsdauerleistungbei40 ° C (W) 1450- Peak Power (W): 4000- Max efficiency (%): 94th- zero load (W): 11- no-load in AES mode (W): 9- no-load in Search mode (W): 3- Protection: Output short circuit, overload, battery voltage too high, battery voltage too low, too high temperature, 230 V AC at the inverter output, too high input voltage ripple- Description: Operating Temperature: -20 to +50 ° C (cooling fan) Protection: IP21- Battery connection: M8 bolts- 230V AC Connection: spring clamp- Weight (kg): 12- Dimensions (HxWxD in mm): 520x255x125- * Crest factor with non-linear load 3: 1

The Phoenix Compact Inverter series has been developed for commercial use; it is suitable for a variety of applications. The development but without compromise on an inverter with clean sine wave output with high efficiency.A key feature is very high start performance. Phoenix inverters are capable of the high starting currents, for example, of refrigeration compressors, electric motors and similar appliances.Virtually unlimited power thanks to parallel and three-phase operation. Up to six inverter units can be connected in parallel for increased performance. Six 24/5000 units, for example, Make 24kW / 30kVA power. A three-phase operation is also possible.Computer Interfaces: All models have a RS-485 connection. All you need is our MK2 interface (see under accessories). This interface takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. An RS-232 to USB conversion cable is also available. With the VEConfigure software that is downloaded for free, the inverters can be adjusted according to requirements. This includes output voltage and frequency, the upper and lower voltage limits and the programming of the relay. The relay can, for example, for generating signals in special situations or can be also used to start a generator.- Phoenix Inverter Type: C24 / 1600- Parallel and 3-phase operation: Yes- Input voltage (VDC): 19-33 V- Output: Output: 230 V ± 2%, frequency: 50 Hz ± 0.1% (may also be set to 60 Hz, and 240 V)- output power at 25 ° C (VA) *: 1600- Ausgangsdauerleistungbei25 ° C (W): 1300- Ausgangsdauerleistungbei40 ° C (W): 1200- Peak Power (W): 3000- Max efficiency (%): 94th- zero load (W): 10- no-load in AES mode (W): 8- no-load in Search mode (W): 3- Protection: Output short circuit, overload, battery voltage too high, battery voltage too low, too high temperature, 230 V AC at the inverter output, too high input voltage ripple- Description: Operating Temperature: -20 to +50 ° C (cooling fan) Protection: IP21- Battery connection: battery cable included 1.5 meters- 230V AC connection: G-ST18i connector- Weight (kg): 10- Dimensions (HxWxD in mm): 375x214x110- * Crest factor with non-linear load 3: 1

The Phoenix Compact inverter series was developed for commercial use; It is suitable for a variety of applications. The development aimed uncompromisingly on an inverter with a clean sinus output with high efficiency.An essential feature is the particularly high starting performance. Phoenix inverters are able to cope with the high starting streams, for example, of cooling compressors, tool engines and the like.Practically unlimited performance through parallel circuit and three-phase operation. Up to six inverter units can be switched in parallel to increase performance. Six 24/5000 units can be handed in e.g. 24kW / 30KVA power. A three-phase operation is also possible.Computer interfaces: All models have an RS-485 access. You only need our MK2 interface (see also under accessories). This interface takes over the galvanic separation between the inverter and the computer and converted from RS-485 to RS-232. An RS-232 to USB conversion cable is also available. With the Veconfigure software, which can be downloaded free of charge, the inverters can be adjusted as required. This includes the output voltage and frequency, the upper and lower voltage limits and the programming of the relay. The relay can be used, for example, to create signals in special situations or to start a generator.- Phoenix inverter type: C12/2000- Parallel and 3-phase operation: Yes- Area of input voltage (VDC): 9.5–17 V- Exit: Output: 230 V ± 2 %, frequency: 50 Hz ± 0.1 % (can also be set to 60 Hz, and 240 V)- Output period at 25 ºC (VA)*: 2000- Output duration performance 25 ºC (W): 1600- Output duration performance 40 ºC (W): 1450- Peakpower (W): 4000- Max. Efficiency (%): 92- Nullllast (W): 9- Nullllast in AES-Mode (W): 7- Nulllast in Search-Mode (W): 3- Protection: Short circuit at the output, overload, battery voltage too high, battery voltage too low, temperature too high, 230 V AC at the inverter output, too high humming tension at the input-Features: operating temperature: -20 to +50 ° C (fan cooling), type of protection: IP21- Battery Connection: M8 Bolzen- 230V AC connection: feather clamp- Weight (kg): 12- Dimensions (HXBXT in mm): 520x255x125- *Top factor with non -linear load 3: 1

The Phoenix Compact inverter series was developed for commercial use; It is suitable for a variety of applications. The development aimed uncompromisingly on an inverter with a clean sinus output with high efficiency.An essential feature is the particularly high starting performance. Phoenix inverters are able to cope with the high starting streams, for example, of cooling compressors, tool engines and the like.Practically unlimited performance through parallel circuit and three-phase operation. Up to six inverter units can be switched in parallel to increase performance. Six 24/5000 units can be handed in e.g. 24kW / 30KVA power. A three-phase operation is also possible.Computer interfaces: All models have an RS-485 access. You only need our MK2 interface (see also under accessories). This interface takes over the galvanic separation between the inverter and the computer and converted from RS-485 to RS-232. An RS-232 to USB conversion cable is also available. With the Veconfigure software, which can be downloaded free of charge, the inverters can be adjusted as required. This includes the output voltage and frequency, the upper and lower voltage limits and the programming of the relay. The relay can be used, for example, to create signals in special situations or to start a generator.- Phoenix inverter type: C12/1600- Parallel and 3-phase operation: Yes- Area of input voltage (VDC): 9.5–17 V- Exit: Output: 230 V ± 2 %, frequency: 50 Hz ± 0.1 % (can also be set to 60 Hz, and 240 V)- Output period at 25 ºC (VA)*: 1600- Output duration performance 25 ºC (W): 1300- Output duration performance 40 ºC (W): 1200- Peakpower (W): 3000- Max. Efficiency (%): 92- Nullllast (W): 8- Nullllast in AES-Mode (W): 5- Nulllast in Search-Mode (W): 2- Protection: Short circuit at the output, overload, battery voltage too high, battery voltage too low, temperature too high, 230 V AC at the inverter output, too high humming tension at the input-Features: operating temperature: -20 to +50 ° C (fan cooling), type of protection: IP21- Battery Connection: Battery cable of 1.5 meters supplied-230V AC connection: G-St18i connector- Weight (kg): 10- Dimensions (HXBXT in mm): 375x214x110- *Top factor with non -linear load 3: 1

The Phoenix Compact Inverter series has been developed for commercial use; it is suitable for a variety of applications. The development but without compromise on an inverter with clean sine wave output with high efficiency.A key feature is very high start performance. Phoenix inverters are capable of the high starting currents, for example, of refrigeration compressors, electric motors and similar appliances.Virtually unlimited power thanks to parallel and three-phase operation. Up to six inverter units can be connected in parallel for increased performance. Six 24/5000 units, for example, Make 24kW / 30kVA power. A three-phase operation is also possible.Computer Interfaces: All models have a RS-485 connection. All you need is our MK2 interface (see under accessories). This interface takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. An RS-232 to USB conversion cable is also available. With the VEConfigure software that is downloaded for free, the inverters can be adjusted according to requirements. This includes output voltage and frequency, the upper and lower voltage limits and the programming of the relay. The relay can, for example, for generating signals in special situations or can be also used to start a generator.- Phoenix Inverter Type: C12 / 1200- Parallel and 3-phase operation: Yes- Input voltage (VDC): 9.5 to 17 V- Output: Output: 230 V ± 2%, frequency: 50 Hz ± 0.1% (may also be set to 60 Hz, and 240 V)- output power at 25 ° C (VA) *: 1200- Ausgangsdauerleistungbei25 ° C (W): 1000- Ausgangsdauerleistungbei40 ° C (W): 900- Peak Power (W): 2400- Max efficiency (%): 92nd- zero load (W): 8- no-load in AES mode (W): 5- no-load in Search mode (W): 2- protection: output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, 230 V AC at the inverter output, too high input voltage ripple- Description: Operating Temperature: -20 to +50 ° C (cooling fan) Protection: IP21- Battery connection: battery cable included 1.5 meters- 230V AC connection: G-ST18i connector- Weight (kg): 10- Dimensions (HxWxD in mm): 375x214x110- * Crest factor with non-linear load 3: 1