NMEA 2000 ist ein Kommunikationsstandard, der von der National Marine Electronics Association (NMEA) entwickelt wurde, um die Datenkommunikation zwischen verschiedenen elektronischen Geräten an Bord wie GPS Empfängern, Autopiloten, Windmessinstrumenten, Tiefenmessern, Navigationsinstrumenten und vielen anderen zu standardisieren. Das Herzstück eines vollständigen Netzwerks ist in der Regel ein Plotter oder Multifunktionsdisplay, wo die Informationen verarbeitet und zur Anzeige gebracht werden können.
Wie funktioniert so ein Netzwerk?
Das Netzwerkkonzept basiert auf einem CAN-Bus (Controller Area Network). Dieser Ansatz ermöglicht es, dass mehrere Geräte über ein einziges Backbone-Kabel verbunden werden können, wodurch die Verkabelung vereinfacht und die Zuverlässigkeit erhöht wird. Jedes Gerät im Netzwerk hat eine einzigartige Adresse, und die Daten werden in Paketen übertragen, die von jedem Gerät im Netzwerk gelesen werden können.
Hier erklären wir, wie man ein NMEA2000 Netz korrekt aufbaut und was es dabei zu beachten gilt.
Was ist der Vorteil im Vergleich zu NMEA 0183?
Im Vergleich zu seinem Vorgänger, dem NMEA 0183-Standard, bietet NMEA 2000 eine höhere Datenübertragungsrate und unterstützt einen umfangreicheren und komplexeren Datenaustausch. Dies ist besonders wichtig für moderne Navigations- und Instrumentensysteme, die eine große Menge an Daten in Echtzeit verarbeiten müssen.
4 veins plus shieldingCable outer diameter 4.6mmThe prices are given for cuts per meter. Special prices for entire rings or roles are available. If necessary, simply inquire about the required amount. Discount of 10 % when decreasing ≥ 50 m and 15 % when accepting ≥ 100 m. The discount is automatically taken into account when determining price.
Micro-C connector for self-assembly, suitable for use in NMEA2000 networks.-Robust, quality components-Schraubkontakte 0.25 to 0.75 mm²Cable gland having gland Ø 4 - 6 mm-As a replacement for damaged connector-After By drawing a line-Selbstbau of NMEA2000 compounds-And much more...
€11.90*
€13.40*(11.19% saved vs. recommended price)
NMEA2000 connectors with screw connectionsNMEA2000 / Micro-C connector suitable for self-assembly.-As replacement for damaged connectors-After pulling through a line-And much more ... nmea2000 coupling (female)
Replacement wind spoon for B&G and Simrad Wreiber. Work -bound and radio.Compatible with WS310, WS320, WS700, VMHU, 608, 508, 213 and 496 sensors.Scope of delivery:Spoon wheel including fastening nut
NMEA2000 interfacesNMEA2000 is based on CAN (Controller Area Netwerk) bus system. NMEA2000 certified products communicate with each other via the NMEA2000 bus. Actisense has developed interfaces that operate to allow NMEA0183 devices on a NMEA2000 bus on. Also, the bi-directional data exchange between the NMEA2000 network and PC.NGW-1- NMEA2000- NMEA0183 GatewayUse existing NMEA0183 devices on the NMEA2000 Network The NGW-1 NMEA the various sytems together. NMEA0183 and NMEA2000 data is reciprocated in both directions and hergewandelt. Using the configuration software can specify which data should be made in both directions.If necessary, several NMEA0183 devices can each be connected via a NGW-1 gateways with the NMEA 2000 bus system.Through the ISO-Drive output and a galvanically isolated OPTO input ground loops are eliminated. The NGW-1 NMEA 2000 the insulation requirements of the regulations.Characteristics:-1 HS + OPTO input-1 HS + ISO-Drive output-Baud rate up to 115200-Use of a NMEA0183 device on the NMEA2000 networkNGT-1 NMEA 2000 <-> to serial PC interface (NMEA compatible software 2000)
€208.00*
€218.90*(4.98% saved vs. recommended price)
This adapter cable enables the connection of a N2K/NMEA2000 device with micro-C connector (e.g. Simrad, B&G, Furuno, Weatherdock, ICOM, HUMMINBIRD) to a Raymarine Seatalkng network.Micro-c: femaleSTNG: FemaleLength: 0.4 metersRaymarine article number: A06045Alternatives:A06075 1.0 mA06079 0.1 m