Victron - Phoenix - 180-1200 VA

VE.Direct communication portThe VE.Direct port can be connected to the following devices:- (required VE.Direct to USB interface cable) to a computer- With Apple and Android smartphones, tablets, Macbooks and other devices(Smart VE.Direct Bluetooth dongle required).Fully configurable:- threshold values

VE.Direct communication portThe VE.Direct port can be connected to the following devices:- (required VE.Direct to USB interface cable) to a computer- With Apple and Android smartphones, tablets, Macbooks and other devices(Smart VE.Direct Bluetooth dongle required).Fully configurable:- threshold values

Ve.direct communication connectionThe VE.Direct connection can be connected to the following devices:-With a computer (Ve.direct to USB interface cable required)- With Apple and Android smartphones, tablets, macbooks or other devices(Ve.direct Bluetooth Smart Dongle required).Fully configurable:- threshold values for triggering and resetting alarms with a low loading status of the battery.- swelling values for switching off and restarting at low battery voltage values.- Dynamic switching off: load-dependent switch-off threshold value- Output voltage 210-245V- Frequency 50Hz or 60Hz-threshold value for ECO mode on/off and Eco mode sensorMonitoring:- and output voltage, % load and alarmsProven reliabilityThe complete bridging with a ring transformer panel has proven itself for years.The inverters are short -circuit -resistant and before overheating (whether by overloading or by theAmbient temperature caused).High switch -on performanceThis is used to switch on loads such as voltage formers for LED-Lamps, halogen lamps or electric tools.Eco modeIn ECO mode, the inverter switches to standby as soon as the load under a preset valuedrops off. In standby mode, the inverter then switches on for a short period of time (regulatedStandard setting: every 2.5 seconds). If the load exceeds a preset threshold, remainsthe inverter switched on.Remote-controlled input/outputA remote-controlled insertion/off switch can be used with a two-pin connector or between the plus pole of theConnect the battery and the left contact of the two -pin connector.LED diagnosisPlease note the description in the manual.Load switching on another changeover of alternating current: the automatic transfer switchWe recommend our Filax Automatic Transfer Switch for our low-performance inverter. With theFilax is switched very quickly (in less than 20 milliseconds), so that an interruption -freeOperation of computers and other electronic devices is guaranteed.

The ultra-fast transfer switch Filax was developed with the goal of sensitive electronics, such as switch computers or modern entertainment system from an AC power source to another. Main power source is typically the power grid, a generator or a land connection. As an alternative source, an inverter is used usually. With its switching time of less than 20 milliseconds even sensitive loads continue to work without interruption. The Filax is not adapted to domestic appliances, with a high power consumption, such as e.g. to provide washing machines or electric motors.230 V / 50 Hz, the maximum switching power 3500 W. dimensions (W): 200 x 120 x 75 mm.

VE.Direct communication portThe VE.Direct port can be connected to the following devices:- (required VE.Direct to USB interface cable) to a computer- With Apple and Android smartphones, tablets, Macbooks and other devices(Smart VE.Direct Bluetooth dongle required).Fully configurable:- threshold values