Nasa Marine - Battery monitors

Especially for Lithium Batery!The BM-1L was developed for monitoring 12 V lithium iron phosphate battery banks. The device is supplied with a 100 A precision resistor (shunt) and a prefabricated wiring harness, which enables easy installation. The battery monitor continuously monitors the on-board voltage, the charging and discharging current and the state of charge of the battery and the remaining percentage for the charge or discharge time. An optical undervoltage alarm warns against deep discharge are consumed and fed invited amp hours indicated Batterie.Zusätzlich. This value can via the menu, for example, be a fully charged battery, are reset. In addition, the voltage of a second battery bank (e.g., starter battery) can be displayed.The BM1 L is specially adapted to the different charging and discharging of LiFePo4 Batteruien. By connecting a battery monitor a more efficient use of the battery is possible, the battery life is prolonged and the risk of failure is reduced.specifications:Supply voltage: 8-16 V DCBattery capacity: 5-600 AhDischarge current: max. 100 ACharging current: max. 100 ARTD: 100 A / 50 mVDisplay capacity: 1.0 Ah in stepsDisplay of the streams 0 - 9.9 A, 0.1 A in steps, 10 - 100 A in 1.0 A stepsHigh contrast LCD, backlit for night operationDisplay 110 x 110 mm standard Clipper housingLow own power consumption: 1.5 mA (without illumination)In the delivery connection cable contained: connection cable 100 A shunt for battery M8 Ringkabelschuh.5 meters connection cable from the display device to the shunt, with ring cable lugs for connection provided on the shunt, supply line with fuse and M8 ring terminal for connection to the battery.

The BM-2 Compact was developed for monitoring 12 V batteries, with a capacity of up to 600 ampers hours. The device is delivered entirely with a 200 A measuring resistor (shunt) and a prefabricated wiring harness, which enables easy installation.The battery monitor continuously monitors the on-board tension, the loading and discharge current and the loading status of the battery in percent as well as the time remaining for loading or unloading.By connecting a battery monitor, more efficient use of the battery is possible, the lifespan of the battery is extended and the risk of a failure is reduced.Specifications:Supply voltage: 8-16 V DCBattery capacity: 5 - 600 AhDischarge current: max. 200 aCharging current: max. 200 aMeasurement resistance: 200 A / 50 MVDisplay of the currents: 0 - 9.9 a in 0.1 A steps, 10 - 200 A in 1.0 A stepsContrastful LC display, backlit for night operationParticularly compact display device, only 124 x 62 mm in size and only 23 mm deepVery low power consumption: only approx. 1.5 mAConnection cables included in the scope of delivery:Connection cable from 100 A shunt to the battery with M8 ring cable shoe.5 meters of connection cable from the display device to the shunt, provided with ring cable shoes for connection to the shunt, supply line with fuse and M8 ring cable shoe for connection to the battery.

The BM1 Bluetooth is the solution if you need a battery monitor, but have no space for the display device or the usually required cable arrangement.With the BM-1 BT you can monitor the level of the lead-acid batteries on your boat or in your caravan directly over your mobile phone or tablet, wireless by Bluetooth.A easy to use Android app, available free of charge on the Nasamarine.com website or in the Google Playstore (requires Android V4.3 or higher), shows the tension of your service battery, the flowing loading and discharge current, the loading status and the time up to the Full loading or unloading of the battery. An acoustic alarm warns if the load is too low.Apple users can buy an app with additional functions in the app store. The app is compatible with iPhone, iPad and iPod touch (requires iOS 9.0 or higher).Supply voltage: 8-16 V DCLow self -power consumption: 2 MADischarge current: max. 100 aCharging current: max. 100 aMeasurement resistance: 100 A / 50 MVA connection cable set is includedDimensions: 112 x 94 x 23 mm!! The app for operation and the operating instructions for this device are only available in English !!

The BM-2+ was developed for monitoring 12 V batterys, with a capacity of up to 600 ampers. The device is delivered entirely with a 200 A measuring resistor (shunt) and a prefabricated wiring harness, which enables easy installation. The battery monitor continuously monitors the on-board tension, the loading and discharge current and the loading status of the battery in percent as well as the time remaining for loading or unloading. An optical undervoltage alarm warns of the battery is too deeply unloaded. This value can be reset via the menu, e.g. with fully charged battery. In addition, the voltage of a second battery range (e.g. starter battery) can be displayed.By connecting a battery monitor, more efficient use of the battery is possible, the lifespan of the battery is extended and the risk of a failure is reduced. Specifications: Specifications:Supply voltage: 8-16 V DCBattery capacity: 5 - 600 AhDischarge current: max. 200 aCharging current: max. 200 aMeasurement resistance: 200 A / 50 MVDisplay of capacity: in 1.0 Ah stepsDisplay of the currents: 0 - 9.9 a in 0.1 A steps, 10 - 200 A in 1.0 A stepsContrastful LC display, backlit for night operationAdvice device as 110 x 110 mm standard clipper housingLow self -power consumption: 3 May MAIM delivery cable: connecting cable from 200 A shunt to the battery with M8 ring cable shoe. 5 meter connecting cable from the display device to the shunt, provided with ring cable shoes for connection on the shunt, supply line with backup and M8 ring cable shoe for connection to the battery.

NASA - Shunt für NASA BM-2

NASA - Shunt für NASA BM-1

The BM-1 compactwurde for monitoring 12 V batterys, with a capacity of up to 600 ampers hours. The device is delivered entirely with a 100 A measuring resistor (shunt) and a prefabricated wiring harness, which enables easy installation. The battery monitor continuously monitors the on-board tension, the loading and discharge current and the loading status of the battery in percent as well as the time remaining for loading or unloading.By connecting a battery monitor, more efficient use of the battery is possible, the lifespan of the battery is extended and the risk of a failure is reduced. Specifications: Specifications:Supply voltage: 8-16 V DCBattery capacity: 5 - 600 AhDischarge current: max. 100 aCharging current: max. 100 aMeasurement resistance: 100 A / 50 MVDisplay of the currents: 0 - 9.9 a in 0.1 A steps, 10 - 100 A in 1.0 A stepsContrastful LC display, backlit for night operationParticularly compact display device, only 124 x 62 mm in size and only 23 mm deepVery low power consumption: only approx. 1.5 MAIM delivery cable: connecting cable from 100 A shunt to the battery with M8 ring cable shoe. 5 meter connecting cable from the display device to the shunt, with ring cable shoes for connection on the shunt, supply line with fuse and M8 ring cable shoe for the connection to the battery.

The BM-1 Compact has been made for the monitoring of 12 V battery banks, with a capacity of up to 600 ampere-hours have been developed. The device is supplied with a 100 A precision resistor (shunt) and a prefabricated wiring harness, which enables easy installation. The battery monitor continuously monitors board voltage, the charging- and discharge current and the charge state of the battery and the remaining percentage for the charge or discharge time.By connecting a battery monitor a more efficient use of the battery is possible, the battery life is prolonged and the risk of failure is reduziert.Spezifikationen:Supply voltage: 8-16 V DCBattery capacity: 5- 600 AhDischarge current: max. 100 ACharging current: max. 100 ARTD: 100 A / 50 mVDisplay of currents: 0- 9.9 A in 0.1 A steps 10- 100 A in 1.0 A stepsHigh contrast LCD, backlit for night operationParticularly compact display, 124 x 62 mm in size and only 23 mm deepVery low power consumption: provided connecting cable from 100 A shunt for battery M8 Ringkabelschuh.5 meters connection cable from the display device to the shunt, with ring cable lugs for connection to the shunt, supply line with fuse and M8 ring terminal for: only about 1.5 Maim delivery connection cable contained the connection to the battery.

The BM-1+ / 24VWurde for monitoring 24 V batterys, with a capacity of up to 600 ampers. The device is delivered entirely with a 100 A measuring resistor (shunt) and a prefabricated wiring harness, which enables easy installation. The battery monitor continuously monitors the on-board tension, the loading and discharge current and the loading status of the battery in percent as well as the time remaining for loading or unloading. An optical undervoltage alarm warns of the battery is too deeply unloaded. This value can be reset via the menu, e.g. with fully charged battery. In addition, the voltage of a second battery range (e.g. starter battery) can be displayed.By connecting a battery monitor, more efficient use of the battery is possible, the lifespan of the battery is extended and the risk of a failure is reduced. Specifications: Specifications:Supply voltage: 16-32 V DCBattery capacity: 5 - 600 AhDischarge current: max. 100 aCharging current: max. 100 aMeasurement resistance: 100 A / 50 MVDisplay of capacity: in 1.0 Ah stepsDisplay of the currents: 0 - 9.9 a in 0.1 A steps, 10 - 100 A in 1.0 A stepsContrastful LC display, backlit for night operationAdvice device as 110 x 110 mm standard clipper housingLow self -power consumption: 3 May MAIM delivery cable: connecting cable from 100 A shunt to the battery with M8 ring cable shoe. 5 meter connecting cable from the display device to the shunt, provided with ring cable shoes for connection on the shunt, supply line with backup and M8 ring cable shoe for connection to the battery.

The BM-1 + was used for the monitoring of 12 V battery banks, with a capacity of up to 600 ampere-hours have been developed. The device is supplied with a 100 A precision resistor (shunt) and a prefabricated wiring harness, which enables easy installation. The battery monitor continuously monitors the on-board voltage, the charging and discharging current and the state of charge of the battery and the remaining percentage for the charge or discharge time. An optical undervoltage alarm warns against deep discharge are consumed and fed invited amp hours indicated Batterie.Zusätzlich. This value can via the menu, for example, be a fully charged battery, are reset. In addition, the voltage of a second battery bank (e.g., starter battery) can be displayed.By connecting a battery monitor a more efficient use of the battery is possible, the battery life is prolonged and the risk of failure is reduziert.Spezifikationen:Supply voltage: 8-16 V DCBattery capacity: 5-600 AhDischarge current: max. 100 ACharging current: max. 100 ARTD: 100 A / 50 mVDisplay capacity: 1.0 Ah in stepsDisplay of the streams 0 - 9.9 A, 0.1 A in steps, 10 - 100 A in 1.0 A stepsHigh contrast LCD, backlit for night operationDisplay 110 x 110 mm standard Clipper housingLow intrinsic power consumption: 3 Maim delivery connection cable contained: connection cable 100 A shunt for battery M8 Ringkabelschuh.5 meters connection cable from the display device to the shunt, with ring cable lugs for connection provided on the shunt, supply line with fuse and M8 ring terminal for connection to the battery.