up to 250 Amps

2 in stock

Philippi - Minus collecting rail EMS6

PHILIPPI - Power Install System 250MINUS-Sammelschiene 6-fach. Strombelastbarkeit 250 A. Alle Bolzen M10, Abmessungen L 212x B 40 x H 50 mm Die Installation von Hochstromkomponenten wie Hauptschalter und Sicherungen ist eine platz- und zeitraubende Aufgabe, da die Verbindung der einzelnen Komponenten aufgrund von mechanischen Unterschieden oftmals nur mit flexiblen Leitungen hergestellt werden kann. Unser neu entwickeltes Hauptverteilungssystem spart enorm viel Platz, Zeit und Geld. Zudem erhöht es die Sicherheit, da alle Verbindungen über passende Kupferlaschen miteinander verbunden werden. Die zentrale Komponenten sind der mechanisch schaltbare (EBH 250) oder der elektrisch fernbedienbare Batterie-Hauptschalter (FBR/TSA/FBC 265). Die nachfolgende Absicherung kann mit den Streifensicherungshalter ESH oder den Bolzensicherunghaltern EBF erfolgen.Am Ein- und Ausgang der Batterie-Hauptschalter kann ein Sicherungs-block ESF montiert werden, um Messleitungen und Verbraucher wie Bilgenpumpe, Ladegerät oder Heizung mit Dauerplus zu versorgen. Die Strombelastbarkeit des Systems beträgt 250 A und ist für DC 12 V und 24 V geeignet.Durch Kombination von mehreren Komponenten lässt sich eine kompakte Hauptstromverteilung für Starter- und Verbraucher-Batterie aufbauen, die zusätzlich mit einem Notschalter zum Start des Motors über die Verbraucher-Batterie ergänzt werden kann. Alternativ kann auch ein Laderelais eingesetzt werden. Dabei können mechanische oder fernbedienbare Hauptschalter (FBA / TSA / FBC) verwendet werden. An die Hauptschalterausgänge können Sicherungsblöcke angebaut werden, um die Hauptleitungen abzusichern. Seitlich können noch Kleinsicherungs-blöcke zur Absicherung von Dauerplus-Verbrauchern ergänzt werden. Die Verbindung erfolgt mit den passenden Verbindungslaschen.

€61.40* €64.90* (5.39% saved vs. recommended price)
previously €61.40*

2 in stock

PHILIPPI - MINUS-Sammelschiene EMS3

PHILIPPI - Power Install System 250MINUS-Sammelschiene 3-fach. Strombelastbarkeit 250 A. Alle Bolzen M10, Abmessungen L 119 x B 40 x H 50 mm Die Installation von Hochstromkomponenten wie Hauptschalter und Sicherungen ist eine platz- und zeitraubende Aufgabe, da die Verbindung der einzelnen Komponenten aufgrund von mechanischen Unterschieden oftmals nur mit flexiblen Leitungen hergestellt werden kann. Unser neu entwickeltes Hauptverteilungssystem spart enorm viel Platz, Zeit und Geld. Zudem erhöht es die Sicherheit, da alle Verbindungen über passende Kupferlaschen miteinander verbunden werden. Die zentrale Komponenten sind der mechanisch schaltbare (EBH 250) oder der elektrisch fernbedienbare Batterie-Hauptschalter (FBR/TSA/FBC 265). Die nachfolgende Absicherung kann mit den Streifensicherungshalter ESH oder den Bolzensicherunghaltern EBF erfolgen.Am Ein- und Ausgang der Batterie-Hauptschalter kann ein Sicherungs-block ESF montiert werden, um Messleitungen und Verbraucher wie Bilgenpumpe, Ladegerät oder Heizung mit Dauerplus zu versorgen. Die Strombelastbarkeit des Systems beträgt 250 A und ist für DC 12 V und 24 V geeignet.Durch Kombination von mehreren Komponenten lässt sich eine kompakte Hauptstromverteilung für Starter- und Verbraucher-Batterie aufbauen, die zusätzlich mit einem Notschalter zum Start des Motors über die Verbraucher-Batterie ergänzt werden kann. Alternativ kann auch ein Laderelais eingesetzt werden. Dabei können mechanische oder fernbedienbare Hauptschalter (FBA / TSA / FBC) verwendet werden. An die Hauptschalterausgänge können Sicherungsblöcke angebaut werden, um die Hauptleitungen abzusichern. Seitlich können noch Kleinsicherungs-blöcke zur Absicherung von Dauerplus-Verbrauchern ergänzt werden. Die Verbindung erfolgt mit den passenden Verbindungslaschen.

€31.40* €32.90* (4.56% saved vs. recommended price)
previously €31.40*

will be ordered for you

PHILIPPI - Verbindungsschiene EBV2-2

Philippi - Power Install System 250Binding rails copper nickel -plated 80 mm² for the connection of the PowerInnstall elements.EBV 2-2: Punch 55 mm + 40 mmThe installation of high-current components such as the main switch and fuses is a space and time-consuming task, since the connection of the individual components due to mechanical differences can often only be established with flexible lines. Our newly developed main distribution system saves a lot of space, time and money. It also increases security because all connections are connected to each other via suitable copper taps. The central components are the mechanically switchable (EBH 250) or the electrically remote-controllable battery switch (FBR/TSA/FBC 265). The subsequent protection can take place with the strip protection holder ESH or the EBF bolt fuse holders.At the input and output of the battery switch switches, a safety block ESF can be installed to supply measuring lines and consumers such as bilge pump, charger or heating with a permanent plus. The current resilience of the system is 250 A and is suitable for DC 12 V and 24 V.By combining several components, a compact main power distribution for starter and consumer battery can be set up, which can also be supplemented with an emergency switch at the start of the engine via the consumer battery. Alternatively, a loading relay can also be used. Mechanical or remote control main switch (FBA / TSA / FBC) can be used. Security blocks can be attached to the main switch outputs to secure the main lines. Small safety blocks to secure permanent plus consumers can also be supplemented on the side. The connection is made with the appropriate connecting taps.

€13.90* €14.50* (4.14% saved vs. recommended price)
previously €13.90*

9 in stock

PHILIPPI - Verbindungsschiene EBV2-1

Philippi - Power Install System 250Binding rails copper nickel -plated 80 mm² for the connection of the PowerInnstall elements.EBV 2-1: Location 55 mmThe installation of high-current components such as the main switch and fuses is a space and time-consuming task, since the connection of the individual components due to mechanical differences can often only be established with flexible lines. Our newly developed main distribution system saves a lot of space, time and money. It also increases security because all connections are connected to each other via suitable copper taps. The central components are the mechanically switchable (EBH 250) or the electrically remote-controllable battery switch (FBR/TSA/FBC 265). The subsequent protection can take place with the strip protection holder ESH or the EBF bolt fuse holders.At the input and output of the battery switch switches, a safety block ESF can be installed to supply measuring lines and consumers such as bilge pump, charger or heating with a permanent plus. The current resilience of the system is 250 A and is suitable for DC 12 V and 24 V.By combining several components, a compact main power distribution for starter and consumer battery can be set up, which can also be supplemented with an emergency switch at the start of the engine via the consumer battery. Alternatively, a loading relay can also be used. Mechanical or remote control main switch (FBA / TSA / FBC) can be used. Security blocks can be attached to the main switch outputs to secure the main lines. Small safety blocks to secure permanent plus consumers can also be supplemented on the side. The connection is made with the appropriate connecting taps.

€11.40* €11.90* (4.2% saved vs. recommended price)
previously €11.40*

2 in stock

PHILIPPI - Verbindungsschiene EBV1

Philippi - Power Install System 250Binding rails copper nickel -plated 80 mm² for the connection of the PowerInnstall elements.EBV 1: Punch 25-33 mmThe installation of high-current components such as the main switch and fuses is a space and time-consuming task, since the connection of the individual components due to mechanical differences can often only be established with flexible lines. Our newly developed main distribution system saves a lot of space, time and money. It also increases security because all connections are connected to each other via suitable copper taps. The central components are the mechanically switchable (EBH 250) or the electrically remote-controllable battery switch (FBR/TSA/FBC 265). The subsequent protection can take place with the strip protection holder ESH or the EBF bolt fuse holders.At the input and output of the battery switch switches, a safety block ESF can be installed to supply measuring lines and consumers such as bilge pump, charger or heating with a permanent plus. The current resilience of the system is 250 A and is suitable for DC 12 V and 24 V.By combining several components, a compact main power distribution for starter and consumer battery can be set up, which can also be supplemented with an emergency switch at the start of the engine via the consumer battery. Alternatively, a loading relay can also be used. Mechanical or remote control main switch (FBA / TSA / FBC) can be used. Security blocks can be attached to the main switch outputs to secure the main lines. Small safety blocks to secure permanent plus consumers can also be supplemented on the side. The connection is made with the appropriate connecting taps.

€9.90* €10.50* (5.71% saved vs. recommended price)
previously €9.90*

3 in stock

Blue Sea - cover for Maxi Bus BS2127 / BS2128

fits for 2127/2128 and BS2127/BS2128

€35.90* €37.72* (4.83% saved vs. recommended price)
previously €35.90*

4 in stock

Blue Sea - collection rail 250 A - 2 bolts - 7.9mm maxibusbar

2 threaded bolt Ø 5/16 "(7.9 mm)6 other fastening options

€37.40* €39.57* (5.48% saved vs. recommended price)
previously €37.40*

8 in stock

Bus bar, brass, 2 bolts Ø 6 mm + 20 mm terminals 4

Busbar with brass contacts. 20 ports Ø 4 mm, 2 bolts Ø 6 mm.Dimensions (LxWxH): 226 x 32 x 27 mm

€17.90* €19.90* (10.05% saved vs. recommended price)
previously €17.90*

3 in stock

Bep - red protective cap for BB6W2S

€4.90* €5.44* (9.93% saved vs. recommended price)
previously €4.90*

will be ordered for you

Bep - black protective cap for BB6W2S

€4.90* €5.44* (9.93% saved vs. recommended price)
previously €4.90*

2 in stock

Bep - collective rail, 12 connections, max. 100a

€16.40* €17.26* (4.98% saved vs. recommended price)
previously €16.40*

will be ordered for you

BEP - Sammelschiene, 6 Anschlüsse, max. 100A

€13.90* €14.58* (4.66% saved vs. recommended price)
previously €13.90*

1 in stock

Blue Sea - connecting box / 2 -pin collective rail - Dualbu

Ideal as a junction box for consumers.Two tinned copper bus bars, each with 2 threaded bolts Ø 5/16 "(7.9 mm) and the screw 5 Ø 4.8 mm.Housing made of resistant polycarbonate with matt cover.Voltage range max. 300 V AC / 48 V DC,Continuous load max. 130 A AC / 150 A DC.Dimensions (W): 124 x 66 x 38 mm.

€41.90* €44.45* (5.74% saved vs. recommended price)
previously €41.90*

6 in stock

Blue Sea protective housing for 250a collective rails

Protective housing made of resistant plastic material with matt cover,suitable for MAXIBUS busbars Art 1459701 (BS2105) and Art 1460001 (BS2126).Dimensions (LxWxH): 222 x 67 x 59 mm.

€36.90* €39.03* (5.46% saved vs. recommended price)
previously €36.90*

6 in stock

Blue Sea - cover for collective rail 2302

Cover for busbar with 20 stores and 2 lead terminals.Matching cover AMS 22 made of plastic for mounting on the screw bolt.Scope of supply: only the Abdeckuzng - without rail!

€7.90* €8.51* (7.17% saved vs. recommended price)
previously €7.90*

8 in stock

BLUE SEA - busbar cover 2301 and 2303

Compact busbar 10 with consumer (8-32 screws) and 2 lead terminals (1/4 "bolt). Ring cable lugs with 4 mm and 6 mm suitable. Matching cover AMS 12 made of plastic for mounting on the screw bolt.Dimensions: L 155 x W 32 x H 32 mm

€4.18* €4.40* (5% saved vs. recommended price)
previously €4.18*

13 in stock

BLUE SEA - cover for busbar 2304/2305

Compact collecting rail with 5 consumer and 2 supply connections. Ideal for connecting the minus connections in small systems.Suitable cover AMS 7 made of plastic for plug in on the screw bolts.Dimensions L 107 x W 22 x H 22 mm

€3.82* €4.02* (4.98% saved vs. recommended price)
previously €3.82*

8 in stock

BLUE SEA - 2-pole busbar 100 A - 2 x 10 ports

2-pole busbar of copper with tin-plated surface,mm with 2 x 10 screw O 4.Allows two-pole connection of consumers to a terminal unit.Voltage range max. 300 V AC / 48 V DC,Continuous load max. 100 A.Dimensions (L x W): 129 x 46 mm.

€20.40* €21.42* (4.76% saved vs. recommended price)
previously €20.40*