B&G - autopilots

OHNE Basisstation

- Control HDS LIVE or HDS carbon from anywhere on your boat with the LR-1- Five options programmable by the user- Easy to use long and short print programming function- Prepared zoom-in / zoom-out and waypoint buttons- Bluetooth® connectivity

WR10 kabellose Autopilot-Fernbedienung für Simrad, B&G und Lowrance.Steuern Sie Ihren Autopiloten von einer beliebigen Stelle an Bord aus – mit dieser einfachen, kabellosen Fernbedienung in Taschenformat. Perfekt für alle Typen von Motor- und Fischerbooten. Ein einfacher Prozess zum Ein- und Auskuppeln gibt Ihnen die Möglichkeit, Ihre Richtung mit einem Kurswechsel von 1 oder 10 Grad aus 30 m Entfernung mit der wasserdichten Bluetooth-Basisstation zu steuern. Einfach zu montieren und an bestehende Systeme anzuschließen. Es können bis zu 4 Fernbedienungen mit der Basisstation verbunden werden.Lieferumfang:- Handfernbedienung- 3 Halteschlaufen mit Karabiner- Batterien- Bluetooth-Antenne mit optional montierbarem Befestigungssockel- 1,8 m NMEA2000-Verbinbdungskabel- T-Verbinder

Control of up to six Zeus²-, Glass Bridge or Vulcan Multi-function DisplayAutopilot remote control via any connected network displayHigh quality knobs made of aluminum with integrated cursor functionsMOB functionAvailable in portrait or landscape orientation tigerSlim design - ideal for mounting at the card tableFlat 8 mm profile allows dashboard assemblyFlush, flush mounting, thanks to the optional bracketIntegrated speaker with high decibels for critical alarmsFast switching between screens thanks to dedicated button and LED indicatorsIndividual NMEA 2000® connection

Powerful and efficient linear drive with low power consumption.Fully integrated hydraulic system, no external hoses, expansion tank, etc.similar image

Powerful, efficient linear drive with a low current consumption.Fully integrated hydraulic system, without external hoses, balancing tank, etc.

Precision-9 Compass delivers NMEA 2000® precise course and rotation speed information to Simrad autopilots, radars and navigation systems. The solid-state sensors measure over nine axes continuously moving and price parameters. In addition, the precision 9-compass are on compatible devices also provide information on heeling, rolling and pitching movements. An easily adjustable mounting bracket and the connection via a single cable allow installation on board almost every ship, including the installation of the mast for vessels with steel hull.Key features· Course, rotation speed, heeling, rolling and pitching movements via NMEA 2000®· Accurate and reliable semiconductor sensor electronics· Course accuracy of +/- 2 ° after calibration· The easily adjustable mounting bracket allows installation on the bulkhead or higher on the mast· After IPX7 waterproof, suitable for installation on the mast for vessels with steel hull· Easy installation using a single NMEA 2000® connection· A compact sensor records course, rotation speed, heeling, rolling and pitching movements· Reliable solid-state sensor technology without moving parts free· Simple and inexpensive installation· Suitable by installing the mast for all body types, including steel hull ships· Dimensions (WxDxH) 119 x 119 x 36mm

Autopilot Computer (High-Capacity) to supplement B&G or Simrad systemsThe NAC-3 autopilot computer is the control center behind its Simrad Autopilot system. It contains the electronics that are required to operate a hydraulic control pump or a mechanical drive, and also interacts with other components such as course sensors and rowing reserves. The NAC-3 is designed for boats with 10 meters (35 feet) length or more and is classified for the operation of high streams, mechanical drive units and solenoid valves (30 amps throughout/50 amps).Main characteristics· Reliable autopilot performance based on the Simrad Continuum control technology· Recommended for ships over 10 meters (35 feet) length· High current output with 30 amps, 50 amps maximum load· Clutch output (3 amps max.)· Compatible with high -stream drive pumps, mechanical drives, hydraulic linear drives and solenoid valves· Virtual rowing feedback for simplified installation on board external board and boats with rear -wheel drive (inner board/outboard)· Supports Simrad RF25 and RF300 rowing units· NMEA 2000® Connection to course sensors, rowing residers, dedicated autopilot controls and multifunction displays· NMEA 0183® input

Autopilot Computer (Medium Capacity) to supplement B&G or Simrad systemsThe NAC-2 autopilot computer is the control center behind your Simrad Autopilot system. It contains the electronics that are required to operate a hydraulic control pump or a mechanical drive, and also interacts with other components such as course sensors and rowing reserves. The NAC-2 is designed for boats of up to 10 meters (35 feet) length and is suitable for the operation of weak streams, mechanical drive units and solenoid valves (8 amps throughout/16 amps).Main characteristics· Reliable autopilot performance based on the Simrad Continuum control technology· Recommended for ships up to 10 meters (35 feet) length· Low power output with continuous 8 amps, 16 amps maximum load· Clutch output (3 amps max.)· Compatible with low -power power pumps, mechanical drives, hydraulic linear drives and solenoid valves· Virtual rowing feedback for simplified installation on board external board and boats with rear -wheel drive (inner board/outboard)· Supports Simrad RF25 rowing units· Plug-and-play connections for a simple installation· NMEA 2000® Connection to course sensors, rowing residers, dedicated autopilot controls and multifunction displays

Autopilot Grundfset to complement B & G or Simrad systems with autopilot computer (High-Capacity) and Precision 9-compass.The system does not include a rudder reference transducer (Virtual Rudder Feedback), but can be supplemented with a rudder.Navico - NAC-3 autopilot computer - High CapacityThe NAC-3 autopilot computer is the control center behind your Simrad autopilot system. It contains the electronics required for the operation of a hydraulic control pump or a mechanical drive, and also interacts with other components such as heading sensors and rudder feedback encoder units. The NAC-3 is designed for boats with 10 meters (35 feet) in length or more, and is classified for the operation of high power pumps, mechanical drive units and solenoid valves (30 amps continuous / 50 amp peak).Key features· Reliable autopilot performance based on the Simrad Continuum control technology· Recommended for ships over 10 meters (35 feet) in length· High power output with consistently 30 amp, 50 amp maximum load· Clutch output (max 3 amps.)· Compatible with high current drive pumps, mechanical drives, hydraulic linear actuators and solenoids· Virtual outboard rudder feedback for simplified installation on board and craft with stern drive (inboard / outboard)Supports Simrad RF25 and RF300 Rudder feedback sensor units· NMEA 2000® Following heading sensors, rudder feedback, dedicated autopilot controls and multifunction displays· NMEA 0183® inputNavico - Precision-9 compass sensorPrecision-9 Compass delivers NMEA 2000® precise course and rotation speed information to Simrad autopilots, radars and navigation systems. The solid-state sensors measure over nine axes continuously moving and price parameters. In addition, the precision 9-compass are on compatible devices also provide information on heeling, rolling and pitching movements. An easily adjustable mounting bracket and the connection via a single cable allow installation on board almost every ship, including the installation of the mast for vessels with steel hull.Key features· Course, rotation speed, heeling, rolling and pitching movements via NMEA 2000®· Accurate and reliable semiconductor sensor electronics· Course accuracy of +/- 2 ° after calibration· The easily adjustable mounting bracket allows installation on the bulkhead or higher on the mast· After IPX7 waterproof, suitable for installation on the mast for vessels with steel hull· Easy installation using a single NMEA 2000® connection· A compact sensor records course, rotation speed, heeling, rolling and pitching movements· Reliable solid-state sensor technology without moving parts free· Simple and inexpensive installation· Suitable by installing the mast for all body types, including steel hull ships· Dimensions (WxDxH) 119 x 119 x 36mm

Autopilot Grundfset to complement B & G or Simrad systems with autopilot computer (Medium Capacity) and Precision-9-compass.The system does not include a rudder reference transducer (Virtual Rudder Feedback), but can be supplemented with a rudder.Navico - NAC-2 autopilot computer - Medium CapacityThe NAC-2 autopilot computer is the control center behind your Simrad autopilot system. It contains the electronics required for the operation of a hydraulic control pump or a mechanical drive, and also interacts with other components such as heading sensors and rudder feedback encoder units. The NAC-2 is designed for boats up to 10 meters (35 feet) in length and is suitable for the operation of low power pump, mechanical drive units and solenoid valves (8 amps continuous / 16 amps peak).Key features· Reliable autopilot performance based on the Simrad Continuum control technology· Recommended for vessels up to 10 meters (35 feet) in length· Low power output with consistently 8 amps, 16 amps peak load· Clutch output (max 3 amps.)· Compatible with low power drive pumps, mechanical drives, hydraulic linear actuators and solenoids· Virtual outboard rudder feedback for simplified installation on board and craft with stern drive (inboard / outboard)Supports Simrad RF25 Rudder feedback sensor units· Plug-and-play connections for easy installation· NMEA 2000® Following heading sensors, rudder feedback, dedicated autopilot controls and multifunction displaysNavico - Precision-9 compass sensorPrecision-9 Compass delivers NMEA 2000® precise course and rotation speed information to Simrad autopilots, radars and navigation systems. The solid-state sensors measure over nine axes continuously moving and price parameters. In addition, the precision 9-compass are on compatible devices also provide information on heeling, rolling and pitching movements. An easily adjustable mounting bracket and the connection via a single cable allow installation on board almost every ship, including the installation of the mast for vessels with steel hull.Key features· Course, rotation speed, heeling, rolling and pitching movements via NMEA 2000®· Accurate and reliable semiconductor sensor electronics· Course accuracy of +/- 2 ° after calibration· The easily adjustable mounting bracket allows installation on the bulkhead or higher on the mast· After IPX7 waterproof, suitable for installation on the mast for vessels with steel hull· Easy installation using a single NMEA 2000® connection· A compact sensor records course, rotation speed, heeling, rolling and pitching movements· Reliable solid-state sensor technology without moving parts free· Simple and inexpensive installation· Suitable by installing the mast for all body types, including steel hull ships· Dimensions (WxDxH) 119 x 119 x 36mm

Autopilot basic set to complement of B & G or Simrad systems with autopilot computer (High-Capacity), Precision-9-compass and rudder reference transducerNavico - NAC-3 autopilot computer - High CapacityThe NAC-3 autopilot computer is the control center behind your Simrad autopilot system. It contains the electronics required for the operation of a hydraulic control pump or a mechanical drive, and also interacts with other components such as heading sensors and rudder feedback encoder units. The NAC-3 is designed for boats with 10 meters (35 feet) in length or more, and is classified for the operation of high power pumps, mechanical drive units and solenoid valves (30 amps continuous / 50 amp peak).Key features· Reliable autopilot performance based on the Simrad Continuum control technology· Recommended for ships over 10 meters (35 feet) in length· High power output with consistently 30 amp, 50 amp maximum load· Clutch output (max 3 amps.)· Compatible with high current drive pumps, mechanical drives, hydraulic linear actuators and solenoids· Virtual outboard rudder feedback for simplified installation on board and craft with stern drive (inboard / outboard)Supports Simrad RF25 and RF300 Rudder feedback sensor units· NMEA 2000® Following heading sensors, rudder feedback, dedicated autopilot controls and multifunction displays· NMEA 0183® inputNavico - Precision-9 compass sensorPrecision-9 Compass delivers NMEA 2000® precise course and rotation speed information to Simrad autopilots, radars and navigation systems. The solid-state sensors measure over nine axes continuously moving and price parameters. In addition, the precision 9-compass are on compatible devices also provide information on heeling, rolling and pitching movements. An easily adjustable mounting bracket and the connection via a single cable allow installation on board almost every ship, including the installation of the mast for vessels with steel hull.Key features· Course, rotation speed, heeling, rolling and pitching movements via NMEA 2000®· Accurate and reliable semiconductor sensor electronics· Course accuracy of +/- 2 ° after calibration· The easily adjustable mounting bracket allows installation on the bulkhead or higher on the mast· After IPX7 waterproof, suitable for installation on the mast for vessels with steel hull· Easy installation using a single NMEA 2000® connection· A compact sensor records course, rotation speed, heeling, rolling and pitching movements· Reliable solid-state sensor technology without moving parts free· Simple and inexpensive installation· Suitable by installing the mast for all body types, including steel hull ships· Dimensions (WxDxH) 119 x 119 x 36mmNavico - RF25N NMEA 2000 rudder feedback sensorThe RF25 is a moderate rudder feedback unit with a SimNet interface. The RF25 is connected directly to Simnet systems for easy installation.Key features· +/- 120 ° measurements· Accuracy: +/- 0.5 °· SimNet / NMEA2000 connectivity· 5.5 m cable includedScope of supply: NAC-3 autopilot computer, Precision-9-compass, RF25N rudder reference transducer and NMEA 2000 Starter Kit

Autopilot basic set to complement B & G or Simrad systems with autopilot computer (Medium Current), Precision-9-compass and rudder reference encoderNavico - NAC-2 autopilot computer - Medium CapacityThe NAC-2 autopilot computer is the control center behind your Simrad autopilot system. It contains the electronics required for the operation of a hydraulic control pump or a mechanical drive, and also interacts with other components such as heading sensors and rudder feedback encoder units. The NAC-2 is designed for boats up to 10 meters (35 feet) in length and is suitable for the operation of low power pump, mechanical drive units and solenoid valves (8 amps continuous / 16 amps peak).Key features· Reliable autopilot performance based on the Simrad Continuum control technology· Recommended for vessels up to 10 meters (35 feet) in length· Low power output with consistently 8 amps, 16 amps peak load· Clutch output (max 3 amps.)· Compatible with low power drive pumps, mechanical drives, hydraulic linear actuators and solenoids· Virtual outboard rudder feedback for simplified installation on board and craft with stern drive (inboard / outboard)Supports Simrad RF25 Rudder feedback sensor units· Plug-and-play connections for easy installation· NMEA 2000® Following heading sensors, rudder feedback, dedicated autopilot controls and multifunction displaysNavico - Precision-9 compass sensorPrecision-9 Compass delivers NMEA 2000® precise course and rotation speed information to Simrad autopilots, radars and navigation systems. The solid-state sensors measure over nine axes continuously moving and price parameters. In addition, the precision 9-compass are on compatible devices also provide information on heeling, rolling and pitching movements. An easily adjustable mounting bracket and the connection via a single cable allow installation on board almost every ship, including the installation of the mast for vessels with steel hull.Key features· Course, rotation speed, heeling, rolling and pitching movements via NMEA 2000®· Accurate and reliable semiconductor sensor electronics· Course accuracy of +/- 2 ° after calibration· The easily adjustable mounting bracket allows installation on the bulkhead or higher on the mast· After IPX7 waterproof, suitable for installation on the mast for vessels with steel hull· Easy installation using a single NMEA 2000® connection· A compact sensor records course, rotation speed, heeling, rolling and pitching movements· Reliable solid-state sensor technology without moving parts free· Simple and inexpensive installation· Suitable by installing the mast for all body types, including steel hull ships· Dimensions (WxDxH) 119 x 119 x 36mmNavico - RF25N NMEA 2000 rudder feedback sensorThe RF25 is a moderate rudder feedback unit with a SimNet interface. The RF25 is connected directly to Simnet systems for easy installation.Key features· +/- 120 ° measurements· Accuracy: +/- 0.5 °· SimNet / NMEA2000 connectivity· 5.5 m cable included

The B&G Triton² pilot controller can be combined with the Triton² instrument display into a fully functional autopilot control panel. Take full control over the autopilot with the simple key field with seven keys, it was designed for safe and reliable operation under all conditions.The pilot controller benefits from B&GS intelligent sailing-specific functions for compass and wind control and, with Smart Tack and Smart Gybe, ensures simple and safe maneuvers, the integration of Zeus MfDS or vulcan card plotters, delivers space and route navigation.Product characteristics:· Intuitive operation· Easy installation· Combine with Triton² instrument display for full pilot control· Compatible with the new B&G NAC-2, NAC-3 and H5000 pilot computers· Flat design· NMEA 2000® certifiedTechnical specifications:· Dimensions 60 x 115 x 32 mm (2.4 x 4.5 x 1.3 inches)· Weight 0.12 kg (0.3 lb)· Electricity consumption 1.4 W· Network load 3 len· Color: Black· Waterproof IPX7