Abgastemperaturanzeige

Digital mini filler display with yellow display pipeMonitors essential system parameters on a light, waterproof, which can be read in daylight in daylight.Compact size enables assembly in any suitable place.- Suitable for 12 and 24 volts systems- Display resolution 5%-Compatible transmitter: 10-180 Ohm (Europe) / 240-33 Ohm (USA)- Electricity recording 17 MA- Pole protection- Operating temperature -40 to +70 ° C- Installation opening Ø 29 mm, also uncomplicated instead of installing existing 12 V sockets- Front water -protected, IP66.- Weight 0.14 kg

Interface for 4 temperature sensors.With the temperature Interface TPC four major temperature values

- Temperature sensor for temperature monitor TPM 5 and TPC 4.- Caplined NTC measuring sensor in brass cable shoe.- Hole Ø 4 mm, cable length 32 cm.- Can be used for measuring temperatures from +30 ° C to +250 ° C

Digital - Mini - Panel thermometer with an external temperature sensor.Many different uses, e.g. for monitoring the temperature of motors, generators or batteries.Very good example also suitable for displaying the exhaust gas temperature in seawater cooled exhaust systems.- Temperature range -40 - +125 ° C- in ° C or ° F- Temperature sensor included with 30 cm connection cable (extendable) included- input voltage 8 - 36 V DC, suitable for 12 and 24 volt systems- Display resolution 1 ° C / 1 ° F- Accuracy +/- 1.25%- Current consumption 1 mA- Hole Ø 29 mm, also simple to install in place of existing 12 V sockets- Front waterproof, IP66.

Suitable for P12 battery charger and OLED temperature ads- Temperature range -40 ° C to 80 ° C- Delivery including double -sided adhesive pad- Waterproof execution- Length of the connecting cable approx. 45 cm

Sensor substitute for NASA MARINE EX-1 exhaust gas temperature indicator / alarm

The ex-1 is used to continuously display the exhaust gas temperature in sea water-cooled exhaust systems and to warn when the temperature increases.The optical and acoustic alarm warns in excessive temperatures, which can lead to damage to the exhaust system and thus to fires or to leave toxic exhaust gases.The display is delivered entirely with a precision temperature sensor and connection cable to enable easy installation.The ex-1 measures the exhaust gas temperature directly in the exhaust and indicates it in degrees Celsius or Fahrenheit.As soon as the normal working temperature has been determined, a temperature value that lies a few degrees higher than alarm threshold can be programmed. The alarm is triggered as soon as this temperature value is exceeded.Even a low level of temperature can indicate a potential problem, such as a partial constipation, a leakage or a failure of the cooling water pump, that it can be remedied in good time before greater damage occurs.The ex - 1 display device is not waterproof and must therefore be installed in a dry area!- Compact dimensions (WXHXT): 125 x 62 x 23 mm- Contrastful LC display- Electricity recording <1.5 MA- Supply current voltage 8 to 15 V DC- Sensor with a 5m connection cable in the scope of delivery-Temperature range -35 to +170 ° C (-31 to +338 ° f)