Other Chargers

The portable power supply can be recharged with 3 different sources.A power supply and a car adapter are available for this.Instead of the power supply, a solar module can also be recharged.There are also 3 different outputs with 230V change voltage, 12V equal voltage and several USB outputs.Technical specifications:Battery: lithiumBattery capacity: 518 Wh, 140 Ah, 3.7VRecharging inputs (hollow plug / coaxial plug DC5521):- AC power supply (included): 19V/5A-Auto-cigarette lighter charger (included): 19V/2.5A- Solar module: MPPT 18-24V/5ALoading time: 8hDC outputs: 12-16.8V/10AUSB output:- 2x USB-A: 5V/2.4A-1x USB-A QC3.0: 5-12V/18W-1x USB-C QC3.0: 5-12V/18WAC outputs (pure sinus voltage):- Output power: 500W- AC voltage: 230V AC- Frequency: 50HzVehicle socket: 12-16.8V/10ADimensions (LXBXH): 310 x 170 x 213mmWeight: 6.6kg

Input voltage 24V / output voltage 24V - charging current max. 30AThe sufficient and complete load of the supply batteries, on a yacht or in a vehicle is usually not guaranteed for a conventional system. In the case of vehicles with an intelligent alternator, the charging voltage is reduced after a short time and there are also voltage peaks during brake processes.Here the charging booster help: they are DC battery chargers with a 12 V or 24 V input and have the following advantages:- Correct cargo with a three -stage characteristic, better utilization of the alternator performance, thus fast and optimal loading of the supply batteries- Effective even on short trips- Adjustable characteristics- suitable for lead/acid batteries, gel, AGM and lithium-ion batteries- Stabilization of a 12 V or 24 V electrical system for supplying sensitive devices- Charge of a 24 V bug battery from a 12 V on-board system- Charge of a 12 V battery from a 24 V on -board system- Power limitation of the charging current, which means that the maximum current can be adapted to existing cable cross -sections- fanless operation for maximum comfort- Power supply mode - operation possible even without a battery at the output- Start start to relieve the V -belt during the starting process-P-bus connection to system integration with a Philippi system monitorTechnical specifications:Protection degree IP 22Dimensions 236 x 180 x 96 mmWeight 2.2 kgConnection M 8Input voltage 10 - 32 V DCEfficiency> 96 %Operating temperature -20 ° to +60 ° CInterface P-BusTemp-Al (accessories) temperature sensor

Input voltage 24V / output voltage 12V - charging current max. 60aThe sufficient and complete load of the supply batteries, on a yacht or in a vehicle is usually not guaranteed for a conventional system. In the case of vehicles with an intelligent alternator, the charging voltage is reduced after a short time and there are also voltage peaks during brake processes.Here the charging booster help: they are DC battery chargers with a 12 V or 24 V input and have the following advantages:- Correct cargo with a three -stage characteristic, better utilization of the alternator performance, thus fast and optimal loading of the supply batteries- Effective even on short trips- Adjustable characteristics- suitable for lead/acid batteries, gel, AGM and lithium-ion batteries- Stabilization of a 12 V or 24 V electrical system for supplying sensitive devices- Charge of a 24 V bug battery from a 12 V on-board system- Charge of a 12 V battery from a 24 V on -board system- Power limitation of the charging current, which means that the maximum current can be adapted to existing cable cross -sections- fanless operation for maximum comfort- Power supply mode - operation possible even without a battery at the output- Start start to relieve the V -belt during the starting process-P-bus connection to system integration with a Philippi system monitorTechnical specifications:Protection degree IP 22Dimensions 236 x 180 x 96 mmWeight 2.2 kgConnection M 8Input voltage 10 - 32 V DCEfficiency> 96 %Operating temperature -20 ° to +60 ° CInterface P-BusTemp-Al (accessories) temperature sensor

Eingangsspannung 12V / Ausgangspannung 24V - Ladestrom max. 30ADie ausreichende und vollständige Ladung der Versorgungsbatterien, auf einer Yacht oder in einem Fahrzeug ist bei einer herkömmlichen Anlage meist nicht gewährleistet. Gerade bei Fahrzeugen mit intelligenter Lichtmaschine wird die Ladespannung nach kurzer Zeit herabgesetzt und es entstehen zusätzlich Spannungsspitzen bei Bremsvorgängen.Hier schaffen die Ladebooster Abhilfe: Sie sind DC-Batterieladegeräte mit einem 12 V oder 24 V Eingang und haben folgende Vorteile:- Korrekte Ladung mit einer dreistufigen Kennlinie, bessere Ausnutzung der Lichtmaschinenleistung, dadurch schnelle und optimale Ladung der Versorgungsbatterien- Selbst bei kurzen Fahrten wirksam- Einstellbare Kennlinien - geeignet für Blei-/Säure Batterien, Gel, AGM und Lithium-Ionen- Batterien- Stabilisierung eines 12 V oder 24 V Bordnetzes zur Versorgung empfindlicher Geräte- Ladung einer 24 V Bug-Batterie von einem 12 V Bordsystem- Ladung einer 12 V Batterie von einem 24 V Bordsystem- Strombegrenzung des Ladestromes, dadurch kann der maximale Strom an vorhandene Kabelquerschnitte angepasst werden- Lüfterloser Betrieb für maximalen Komfort- Netzteilmodus - Betrieb auch ohne Batterie am Ausgang möglich- Softstart, um beim Startvorgang den Keilriemen zu entlasten- P-BUS Anschluss zur Systemintegration mit einem philippi System-MonitorTechnische Daten:Schutzgrad IP 22Abmessungen 236 x 180 x 96 mmGewicht 2,2 kgAnschluss M 8Eingangsspannung 10 - 32 V DCWirkungsgrad > 96 %Betriebstemperatur -20° to +60°CInterface P-BUSTemperaturfühler Temp-AL (Zubehör)

Input voltage 12V / output voltage 12V - charging current max. 60aThe sufficient and complete load of the supply batteries, on a yacht or in a vehicle is usually not guaranteed for a conventional system. In the case of vehicles with an intelligent alternator, the charging voltage is reduced after a short time and there are also voltage peaks during brake processes.Here the charging booster help: they are DC battery chargers with a 12 V or 24 V input and have the following advantages:- Correct cargo with a three -stage characteristic, better utilization of the alternator performance, thus fast and optimal loading of the supply batteries- Effective even on short trips- Adjustable characteristics- suitable for lead/acid batteries, gel, AGM and lithium-ion batteries- Stabilization of a 12 V or 24 V electrical system for supplying sensitive devices- Charge of a 24 V bug battery from a 12 V on-board system- Charge of a 12 V battery from a 24 V on -board system- Power limitation of the charging current, which means that the maximum current can be adapted to existing cable cross -sections- fanless operation for maximum comfort- Power supply mode - operation possible even without a battery at the output- Start start to relieve the V -belt during the starting process-P-bus connection to system integration with a Philippi system monitorTechnical specifications:Protection degree IP 22Dimensions 236 x 180 x 96 mmWeight 2.2 kgConnection M 8Input voltage 10 - 32 V DCEfficiency> 96 %Operating temperature -20 ° to +60 ° CInterface P-BusTemp-Al (accessories) temperature sensor

Ausgangsspannung 14,4/14,7V, 220-240V 50/60 Hz, Ladestrom 10A, Batteriekapazität 12V 30-250Ah, IP65

Output voltage 14.4/14.7V, 220-240V 50/60 Hz, charging current 8a, battery capacity 12V 20-200AH, IP65

Ausgangsspannung 14,4/14,7V, 220-240V 50/60 Hz, Ladestrom 6A, Batteriekapazität 12V 10-150Ah, IP65

Output voltage 14.4/14.7V, 220-240V 50/60 Hz, charging current 4A, battery capacity 12V 2-110AH, IP65

FIGURE SIMILAR !!!These are the 18 Amperer execution!***New Release of the manufacturer.First delivery in April in small numbers.---> Current orders can be delivered until around the beginning of May!

DC-DC converter for charging a 12V or 24V battery in vehicles with an intelligent alternator(User braking, Euro 5 and Euro 6 engines)The DC-DC converter Buck-Boost is a DC DC converter for charging a 12V or 24V battery in vehicles with an intelligent alternator.The converter loads the additional battery with a preset charging voltage, whereby high voltages (e.g. Mercedes: 15.4V) or low voltages are eliminated.System for detection when "engine is running"A deep discharge of the vehicle's starter battery is prevented by a built -in system that prevents the "engine running".Instead of this detection system, the converter can also be activated by a programmable input (D+, CANBUS or (+) 15 connection).Fully programmableThe converter can be completely programmed using a simple and user-friendly PC application.(A cable USB Type A plug is required to USB type B plug)A product for 12V, 24V and 12/24V systemsThe converter can be programmed so that it loads a 12V or a 24V additional battery either via a 12V or a 24V AC generator or a starter battery.Charging current and input current limitationThe starting current is determined by the following factors:- the setting of the maximum charging current.- the setting of the maximum input current.- Limiting the maximum operating temperature of the converter.Status ads input (LED)Green: Converter is onYellow: input voltage below the threshold value, converterRed: overtemperature, converter outBlue, flashes quickly: the engine runs, converters switches on after the delayed delayBlue, flashes slowly: undervoltage at the entrance, converter outStatus ads output (LED)Green: converter out, battery voltage normalYellow: converter, battery voltage lowRed: converter out, battery empty or not connectedLila: converterInput voltage range 7-35VThreshold value undervoltage 10VOutput voltage range 2-30VMaximum charging current 12V: 100A 24V: 50AElectricity consumption converter, LEDs from (power saving mode) 7 MAAt/from input "to" threshold voltage> 2 V, maximum input voltage 60 VOperating temperature range -25 +80 ° CAmbient temperature max. Strom: up to 40 ° CWeight 4.1kgDimensions 288 x 162 x 95mm

Orion-TR Smart isolated DC/DC chargers with a 3-stable batteryada algorithmSuitable for Bluetooth SmartMonitoring, changing the settings and updating the charger at newStanding software functions can be used with any Bluetooth-enabled smartphone, tablet or othersDevice can be carried out.Fully programmable- Batterieladealgorithm (configurable) or firm output.- Intelligent generator compatibility: engine running.Adaptive 3-stage loading algorithm: constant current-constant voltage-preservation• With lead batteries, it is important that the recording time is kept short in flat discharges toAvoid an overload of the battery. After a deep discharge, theConstant voltage duration automatically extended to ensure that the battery is completelyload.• The recording time is fixed for lithium batteries, 2 hours by default.• Alternatively, a fixed output voltage can be selected.Fern-/shutdownA remote-controlled on/off switch or a relay contact can be found on the two-pin connectorconnect.Alternatively, the connection H (right) of the two-pole plug into a battery plus pole or theConnection l (left) of the two-pin connector to the battery minus pole (or for example to the bodyof a vehicle).All models are short -circuit -resistant and can be switched in parallel to increase the output currentwill.Unlimited many devices can be switched in parallel.Over -temperature protectionWith high ambient temperatures, the output current is reduced.Protection class IP43When the screw terminals are installed on the device.Screw terminalsNo special tools are required for installation.Input protection (not interchangeable)Technical specifications:Model: 24/12-30 (360W)Input voltage area (1): 20-35 VSub -voltage shutdown: 14 VSub -voltage restart: 15 VStarting stern tension: 12.2VSetting range output voltage: 10-15 VTolerance Output voltage: +/- 0.2 VStarting noise: 2 MV RMSAccount.Maximum output current (10 s) with output stern voltage minus 20%: 45 aShort -circuit output current: 60 aAccount. Output power at 25 ° C: 430 WAccount. Output power at 40 ° C: 360 WEfficiency: 88%Electricity recording without load:

Technical specifications:Model: 24/24-17 (400W)Input voltage area (1): 20-35 VSub -voltage shutdown: 14 VSub -voltage restart: 15 VStarting stern tension: 24.2 VSetting range output voltage: 20-30 VTolerance Output voltage: +/- 0.2 VStarting noise: 2 MV RMSAccount.Maximum output current (10 s) with output stern voltage minus 20%: 25 aShort -circuit output current: 40 aAccount. Output power at 25 ° C: 480 WAccount. Output power at 40 ° C: 400 WEfficiency: 89%Electricity recording without load:

Orion Tr Smart isolated DC / DC chargers with 3-stage battery charging algorithmSuitable for Bluetooth SmartMonitoring, change settings and update the charger for newly availablerelated software functions can work with any Bluetooth-enabled smartphone, tablet or otherDevice are made.fully programmable- battery charging algorithm (configurable) or fixed output.- Intelligent Generator Compatibility: motor running detection.Adaptive 3-stage charging algorithm: constant current - constant voltage - Conservation• For lead-acid batteries, it is important that in shallow discharges the recording time is kept short toto avoid overloading the battery. After a deep discharge is theConstant-voltage duration is automatically extended to ensure that the battery fullycharging.• For lithium batteries, the recording time is fixed, by default 2 hours.• Alternatively, a fixed output voltage can be selected.Remote on / off featurecan be to the two-pin connector, a remote-controlled on / off switch or relay contactconnect.Alternatively, the terminal H can (right) of the two-pin plug to a battery terminal or theTerminal L (left) of the two-pin connector to the battery negative terminal (or, for example, to the bodya vehicle) are switched.All models are short circuit and can be switched in parallel to increase the output currentbecome.There can be an unlimited number of devices connected in parallel.Overtemperature protectionAt high ambient temperatures, the output current is reduced.Protection class IP43If the screw terminals are installed facing downward on the device.screwTo install No special tools are required.Input fuse (not replaceable)Technical specifications:Model: 12 / 24-15 (360W)10-17 V: input voltage (1)Undervoltage shutdown: 7 VUndervoltage restart: 7.5VOutput Voltage: 24.2 VSetting Output Voltage: 20-30 VOutput voltage tolerance: +/- 0.2 VOutput Noise: 2 mV rmsCont. Output current at the rated output voltage and 40 ° C: A 15Maximum output current (10 s) at rated output voltage minus 20%: 25 AShort circuit output current: 40 ACont. Output power at 25 ° C: 430 WCont. Output at 40 ° C: 360 WEfficiency: 88%Current consumption without load

Orion-TR Smart isolated DC/DC chargers with a 3-stable batteryada algorithmSuitable for Bluetooth SmartMonitoring, changing the settings and updating the charger at newStanding software functions can be used with any Bluetooth-enabled smartphone, tablet or othersDevice can be carried out.Fully programmable- Batterieladealgorithm (configurable) or firm output.- Intelligent generator compatibility: engine running.Adaptive 3-stage loading algorithm: constant current-constant voltage-preservation• With lead batteries, it is important that the recording time is kept short in flat discharges toAvoid an overload of the battery. After a deep discharge, theConstant voltage duration automatically extended to ensure that the battery is completelyload.• The recording time is fixed for lithium batteries, 2 hours by default.• Alternatively, a fixed output voltage can be selected.Fern-/shutdownA remote-controlled on/off switch or a relay contact can be found on the two-pin connectorconnect.Alternatively, the connection H (right) of the two-pole plug into a battery plus pole or theConnection l (left) of the two-pin connector to the battery minus pole (or for example to the bodyof a vehicle).All models are short -circuit -resistant and can be switched in parallel to increase the output currentwill.Unlimited many devices can be switched in parallel.Over -temperature protectionWith high ambient temperatures, the output current is reduced.Protection class IP43When the screw terminals are installed on the device.Screw terminalsNo special tools are required for installation.Input protection (not interchangeable)Technical specifications:Model: 12/12-30 (360W)Input voltage area (1): 10-17 VSub -voltage shutdown: 7 VSub -voltage restart: 7.5 VStarting stern tension: 12.2VSetting range output voltage: 10-15 VTolerance Output voltage: +/- 0.2 VStarting noise: 2 MV RMSAccount.Maximum output current (10 s) with output stern voltage minus 20%: 40 aShort -circuit output current: 60 aAccount. Output power at 25 ° C: 430 WAccount. Output power at 40 ° C: 360 WEfficiency: 87%Electricity recording without load: