Sonar Module

S5100 is a high-performance CHIRP sonar module. Three fully independent channels able to deliver high-resolution sonar coverage across multiple depth ranges, precision-focused for offshore sportfishing anglers.

StructureScan 3D is powered by a multi-beam sonar technology, the detailed high quality images created.This is achieved by images of the underwater terrain and the fish population in a high-resolution three-dimensional, 180-degree view are displayed.The realistic three-dimensional images are Gen3 series of fish finders / plotters appear on the Lowrance HDS when the devices in conjunction with the side scan 3D Skimmer transducer and the StructureScan 3D module can be used.The Scan Track pan-tilt-rotation control, the screen commands and user-friendly, preset viewing positions can be 3D images from any angle viewing.With StructureScan 3D anglers succeed in tracking down fish stocks better.Even with langsamster drive potential fishing grounds and floor coverings in the 180 ° radius can be searched quickly.As abrupt changes in depth, points, ditches, rock piles, underwater bushes, sea grass, Booth Wood, wrecks and more.Thereby significantly possible sidescan imaging ensures the StructureScan 3D chair has been equipped with more sensors.The underwater terrain next to the boat can be up to a distance of 200 meters displayed port and starboard.StructureScan 3D allows numerous opportunities for viewing, including two-dimensional DownScan Imaging ™ and StructureScan HD and a new, detailed 3D view.Use the preset virtual point-of-view perspectives or the scan track pan-tilt-rotation control can view and perspective to be adjusted for the area under your boat.Through a combination of HD and 3D view, you get an optimized overview of where fish are staying, and fishing zones can better scan.By Leading Edge scanning scanning beams are clearly illustrated graphically in sampling of the soil.Depth and dimensions of the currently scanned area are displayed as red compartments directly under the boat.At Leading Edge also a depth scale is included that displays detailed by zooming details and gives you an impression of depth.Select Scan automatically shaded cover with fish stock and suspended targets in a color that contrasts with the selected color palette, so that is the target identification easier than ever before.Vertical Enhancement is a scale that allows users to select and enhances the differences in height as well as important changes in the depth contour on the screen and the more clearly identifies.By Vertical Enhancement even small changes in the deep structure are visible.By waypoint overlay function, it is easy to call, Fisheries structures or other underwater areas again.a waypoint at the location of the boat can be added via the waypoint arrow keys or replaced at the cursor mode to save a waypoint for specific goals, bait or hiding places.The standard configuration of HDS Gen 3 and the StructureScan® 3D module set detailed settings for 3D images.Surface Clarity and contrast using the slider on the screen can be adapted.With the "Surface Clarity" surface clutter can be reduced to the screen by the sensitivity of the receiver is reduced near the surface.The contrast setting of different colors makes fish and structures more visible.Ethernet ports can connect up to three network devices.Technical specifications:· Sounder output Max RMS: 500W· Enhanced sounder frequencies 455 kHz· Side Scan Imaging: · Max Range: 600 m ft./183 · Track bottom 35 mph / 56 kph · Mark objects 15 mph / 24 kph · Optimum imaging: 2-8 mph / 3-13 kph · DownScan Imaging: · Max Depth: 300 ft / 92 m · Track bottom 35 mph / 56 kph · Mark objects: 2-8 mph / 3-13 kph · Optimum imaging: 2-8 mph / 3-13 kph · Input voltage 10V - 17V DC· Power Consumption Max: 0.75 A, Typical: 0.60 A, Inrush: 4.7 A pk · Length sensor cable 20 ft / 6m Scope of delivery:1 piece StructureScan 3D Blackbox1 piece StructureScan transducer 3D1 piece Power cable1 piece 4.5m Ethernet cable

SonarHub & trade; - Sonar Module with StructureScan HD + CHIRP sonarThanks to sophisticated StructureScan HD and CHIRP fishfinder technology is the compact SonarHub & trade; Module ideal for locating fish and track the bait. It provides clear, picture-like views of the structures and details of the seabed.The SonarHub & trade; can easily to Lowrance HDS Gen2 / Gen2 Touch or Simrad NSS / NSS Evo2 multifunction displays are connected. StructureScan® HD and CHIRP sonar technology make it easier than ever to find the best fishing areas.The CHIRP sonar provides high-resolution details to depths of more than 1,000 m.The excellent target separation and the interference suppression make the Sonar images clearly and easily identifiable.The StructureScan® HD function allows image similar ads for productive fishing, diving and search and rescue activities. The functionality of the StructureScan® corresponds to the LLS-2 StructureScan® HD Sonar on page 124thThe Broadband Sounder can be displayed as a single-frequency sonar on a split screen simultaneously with the StructureScan® representation. Chirp sonar and StructureScan® can not be displayed simultaneously.The specially designed chair provides the industry's best scanning range and resolution. The SonarHub & trade; provides a clear view right next to the boat and separates fish from the surrounding structure. One can clearly see individual fish and distinguish it from other objects, structures, temperature jump layers and the seabed.trade to the SonarHub &; The following encoders can be connected:CHIRP transducer - Airmar TM150 or B150M. For use of the CHIRP sonar and single-frequency sonar (83 kHz)Or:Lowrance / Airmar transducer for Broadband Sounder (with blue connectors) for use of Broadband Sounders without CHIRPAnd at the same time:StructureScan & trade; HD encoder - LSS-2 for use of StructureScan® (down- and sidescan)The SonarHub & trade; has three Ethernet ports, and is therefore used simultaneously as Ethernet manifold.Technical specifications:CHIRP & single-frequency sonar:Output power: 250 W RMS-Max. Depth (transducer dependent): ca. 1065 m (3500 ft)CHIRP frequencies: Low, Medium, High-Narrow-band frequencies: 50 kHz / 83 kHz / 200 kHz-StructureScan:Output power: 500 W RMS-Range side max .: 90 m (300 ft) per side-Max. Depth: about 90 m (300 ft)Frequency: 455 & 800 kHz-Supply voltage 12/24 V DC (9-32 V DC)-Dimensions (W): 204 x 57 x 207 mm

StructureScan 3D is powered by a multi-beam sonar technology, the detailed high quality images created.This is achieved by images of the underwater terrain and the fish population in a high-resolution three-dimensional, 180-degree view are displayed.The realistic three-dimensional images are Gen3 series of fish finders / plotters appear on the Lowrance HDS when the devices in conjunction with the side scan 3D Skimmer transducer and the StructureScan 3D module can be used.The Scan Track pan-tilt-rotation control, the screen commands and user-friendly, preset viewing positions can be 3D images from any angle viewing.With StructureScan 3D anglers succeed in tracking down fish stocks better.Even with langsamster drive potential fishing grounds and floor coverings in the 180 ° radius can be searched quickly.As abrupt changes in depth, points, ditches, rock piles, underwater bushes, sea grass, Booth Wood, wrecks and more.Thereby significantly possible sidescan imaging ensures the StructureScan 3D chair has been equipped with more sensors.The underwater terrain next to the boat can be up to a distance of 200 meters displayed port and starboard.StructureScan 3D allows numerous opportunities for viewing, including two-dimensional DownScan Imaging ™ and StructureScan HD and a new, detailed 3D view.Use the preset virtual point-of-view perspectives or the scan track pan-tilt-rotation control can view and perspective to be adjusted for the area under your boat.Through a combination of HD and 3D view, you get an optimized overview of where fish are staying, and fishing zones can better scan.By Leading Edge scanning scanning beams are clearly illustrated graphically in sampling of the soil.Depth and dimensions of the currently scanned area are displayed as red compartments directly under the boat.At Leading Edge also a depth scale is included that displays detailed by zooming details and gives you an impression of depth.Select Scan automatically shaded cover with fish stock and suspended targets in a color that contrasts with the selected color palette, so that is the target identification easier than ever before.Vertical Enhancement is a scale that allows users to select and enhances the differences in height as well as important changes in the depth contour on the screen and the more clearly identifies.By Vertical Enhancement even small changes in the deep structure are visible.By waypoint overlay function, it is easy to call, Fisheries structures or other underwater areas again.a waypoint at the location of the boat can be added via the waypoint arrow keys or replaced at the cursor mode to save a waypoint for specific goals, bait or hiding places.The standard configuration of HDS Gen 3 and the StructureScan® 3D module set detailed settings for 3D images.Surface Clarity and contrast using the slider on the screen can be adapted.With the "Surface Clarity" surface clutter can be reduced to the screen by the sensitivity of the receiver is reduced near the surface.The contrast setting of different colors makes fish and structures more visible.Ethernet ports can connect up to three network devices.Technical specifications:· Sounder output Max RMS: 500W· Enhanced sounder frequencies 455 kHz· Side Scan Imaging: · Max Range: 600 m ft./183 · Track bottom 35 mph / 56 kph · Mark objects 15 mph / 24 kph · Optimum imaging: 2-8 mph / 3-13 kph · DownScan Imaging: · Max Depth: 300 ft / 92 m · Track bottom 35 mph / 56 kph · Mark objects: 2-8 mph / 3-13 kph · Optimum imaging: 2-8 mph / 3-13 kph · Input voltage 10V - 17V DC· Power Consumption Max: 0.75 A, Typical: 0.60 A, Inrush: 4.7 A pk Scope of delivery:1 piece StructureScan 3D Blackbox1 piece Power cable1 piece 4.5m Ethernet cable