LED mit Bajonettsockel

NO BSH approval, export only!60SMD LEDØ 31mm x H69mm with base,Bayonet BAY15dred

No BSH approval, only export!60smd LEDØ 31mm x H69mm with base,Bajonettsockel Bay15dgreen

NO BSH approval, export only!15SMD LEDØ 26mm x H52mm with base,Bayonet BAY15dred

No BSH approval, only export!15SMD LEDØ 26mm x H52mm with base,Bajonettsockel Bay15dgreen

MARINE LED range- Very low power consumption- Pleasant warm white light color- The light color corresponds to conventional incandescent lamps- Large input voltage range, suitable for 12 and 24 V systems- Insensitive against voltage spikes (by dynamo, charger, etc.)- "burn out" prevents Integrated voltage regulation and guarantees long service life- The lamps with integrated power control function independently of the polarity- In connection with an electronic dimmer (pulse width modulation), the LED can be dimmed- Due to continuous development we reserve the right without notice in design and specifications to supply different items successor.- no BSH approval for export only1 Lamp with 30 SMD-LED bayonet base BAY15d (picture 2 left side)Series: 30 SMD Bayonet pin baseLuminous flux output typ .: 350 lumensColor temperature: warm white (3000 Kelvin)CRI:> 80Rated / rated life: up to 50,000 hLumen maintenance: 0.7Angle: 270 °Socket type (standard designation): BAY15dConsumption: 3.2 wattsInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz effectivelyReplaced: about 28 W halogen spot *Dimmable: YesDimensions: 22 mm diameter x 47 mmWeight: 15 gWeight in the Blister: 28 gSwitching cycles:> 25,000Color consistency SDCM: <4Energy efficiency class: A +Delay: none (<1 sec.)Power Factor: 0.8* 32 W as shown in Table 6 of the EU Regulation 244/2009Consumption in W was for decades as a benchmark for lamps alternatives.However, the prescribed formulas for determining equivalence do not necessarily reflect the realistic replacement again.The subjective perception of brightness of an LED lamp is highly dependent on the positioning and type of light.Most LED lamps emit light mainly in one direction.As a result, lamps are felt with a low equivalent value, according to the EU regulations as significantly brighter.IMPORTANT NOTE:Please note that the offered products for use on motor vehicles not permitted and is not suitable!Unlike the brake light and tail light used 2-string automotive lamps BAY15D base is different toppings! + And - VE are included with the offered lamps respectively on both Fußkontakten. The outer ring of the base is not used.

Marine LED range- Very low energy requirement- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control prevents “burning down” and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.- for position lanterns, no BSH approval, only exportSeries 1 lamp with 15 SMD globe with bayonet baseLight current tax type 140 lumensColor temperature 2700 Kelvin)CRI> 80Rated /nominal life of up to 50,000 hLight current maintenance 0.7Ray angle 300 °Base type (standard designation) Bay15D (Fig. 2 Left)Consumption 1.6 wattsInput voltage 10-30V DC / 10-18V AC at 50/60 Hz EffectiveReplaced approx. 20W bayonet lamp*Dimmable yesDimensions Ø 25 mm x 48 mmWeight 11 gWeight in the blister 22 gSchlag cycles> 25,000Color consistency sdcm <4Energy efficiency class [A-G]: GEPREL registration number 2019/2015: 773179Delay of switching no (<0.5 seconds)Power factor 0.8*15 W in accordance with Table 6 of the EU Regulation 244/2009The consumption in Walt was considered a comparative value for lamp alternatives for decades. However, the given formulas for equivalent determination do not necessarily reflect the realistic replacement. The subjective perception of the brightness of an LED lamp depends heavily on the positioning and type of light. Most LED lamps mainly emit the light in one direction. As a result, lamps with a low equivalence value are perceived as much brighter according to the EU regulations.IMPORTANT NOTE:Please note that the item offered for use on motor vehicles is not permitted and is not suitable!In contrast to the 2 threads used for brake light and the bottom light, the Bay15d base is deviated differently! + and - VE are on the two foot contacts with the lamp offered. The outer ring of the base is not occupied.

MARINE LED range- Very low power consumption- Pleasant warm white light color- The light color corresponds to conventional incandescent lamps- Large input voltage range, suitable for 12 and 24 V systems- Insensitive against voltage spikes (by dynamo, charger, etc.)- "burn out" prevents Integrated voltage regulation and guarantees long service life- The lamps with integrated power control function independently of the polarity- In connection with an electronic dimmer (pulse width modulation), the LED can be dimmed- Due to continuous development we reserve the right without notice in design and specifications to supply different items successor.1 lamp with 6 SMD-LED, forward beam.Bayonet base with a foot contact (BA15s) - picture 2, right sideSeries: 6 SMD spot with bayonet baseLuminous flux output typ .: 100 lumensColor temperature: warm white (3000 Kelvin)CRI:> 80Rated / rated life: up to 35,000 hLumen maintenance: 0.7Angle: 125 °Base Type: BA15dConsumption: 1 WattInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz effectivelyReplaces: 15-20 W halogen spotlight *Dimmable: YesDimensions: Ø 26.7 mm x 38 mmWeight: 9 gWeight in blister: 20 gSwitching cycles:> 25,000Color Consistency: SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class: A +Delay: none (<1 sec.)Power Factor: 0.8This article is to be used only for the marine sector.The use as light source in motor vehicles is not permitted and prohibited. * 15 W as shown in Table 6 of the EU Regulation 244/2009Consumption in W was for decades as a benchmark for lamps alternatives.However, the prescribed formulas for determining equivalence do not necessarily reflect the realistic replacement again.The subjective perception of brightness of an LED lamp is highly dependent on the positioning and type of light.Most LED lamps emit light mainly in one direction. As a result, lamps are felt with a low equivalent value, according to the EU regulations as significantly brighter.

Marine LED range- Very low energy requirement- Pleasant warm and white light color- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control prevents “burning down” and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.1 lamp with 6 SMD LED, radiating forward.Bajonet base with two foot contacts (BA15D),Series: 6 SMD spot with bayonet baseLight current tax type.: 100 lumensColor temperature: warm white (approx. 3000 Kelvin)Cri:> 80Rated /nominal life duration: up to 35,000 hLight stream maintenance: 0.7Ray angle: 125 °Base type: BA15D (Fig. 2 in the middle)Consumption: 1 wattsInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz EffectiveReplaced: approx. 15-20 w halogen spot*Dimmable: yesDimensions: Ø 26.7 mm x 38 mmWeight: 9 gWeight in the blister: 20 gSchlag cycles:> 25,000Color consistency: SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class [A-G]: FEprel registration number 2019/2015: 767011Delay of switching: no (<1Sec.)Power factor: 0.8This article can only be used for the naval area.The usual use of this BA15D is a single -down lamp with potential -free base (e.g. anchor light in boats or in the vehicle interior). The BA15D cannot be used as a replacement for a doubt lamp (brake and bottom).Use as a lamp in motor vehicles is not permitted and permissible.*15 W in accordance with Table 6 of the EU Regulation 244/2009The consumption in Walt was considered a comparative value for lamp alternatives for decades.However, the given formulas for equivalent determination do not necessarily reflect the realistic replacement.The subjective perception of the brightness of an LED lamp depends heavily on the positioning and type of light.Most LED lamps mainly emit the light in one direction. As a result, lamps with a low equivalence value are perceived as much brighter according to the EU regulations.

MARINE LED range- Very low power consumption- Pleasant warm white light color- The light color corresponds to conventional incandescent lamps- Large input voltage range, suitable for 12 and 24 V systems- Insensitive against voltage spikes (by dynamo, charger, etc.)- "burn out" prevents Integrated voltage regulation and guarantees long service life- The lamps with integrated power control function independently of the polarity- In connection with an electronic dimmer (pulse width modulation), the LED can be dimmed- Due to continuous development we reserve the right without notice in design and specifications to supply different items successor.- Energy efficiency class A +15 SMD LED.The design corresponds to a conventional light bulb, the filament was replaced by a SMD LED insert!Bayonet base with two Fußkontakten (BA15d) - (Picture 2 in the middle)Series: 15er SMD Globe with bayonet baseLuminous flux output typ .: 140 lumensColor temperature: warm white (2700 Kelvin)CRI:> 80Rated / rated life: up to 50,000 hLumen maintenance: 0.7Angle: 300 °Socket type (standard designation) BA15dConsumption: 1.6 wattsInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz effectivelyReplaces: about 15-20W bayonet lamp *Dimmable: YesDimensions: Ø 25mm x 48mmWeight: 12 gWeight in blister: 23 gSwitching cycles:> 25,000Color Consistency: SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class: A +Delay: none (<1 sec.)Power Factor: 0.8This article is to be used only for the marine sector.The usual use of these BA15D than single filament with floating base (e.g. anchor light on boats or in the vehicle interior). The BA15D can not be used as a replacement for a two-filament lamp (brake and tail light)The use as light source in motor vehicles is not permitted and prohibited. * 15 W as shown in Table 6 of the EU Regulation 244/2009Consumption in W was for decades as a benchmark for lamps alternatives.However, the prescribed formulas for determining equivalence do not necessarily reflect the realistic replacement again.The subjective perception of brightness of an LED lamp is highly dependent on the positioning and type of light.Most LED lamps emit light mainly in one direction. As a result, lamps are felt with a low equivalent value, according to the EU regulations as significantly brighter.