Kombigeräte: Wechselrichter + Batterielader in einem Gerät

Victron installation accessories

Network cable for connecting the control panels

X-Connect System: The X-Connect System offers a flexible and cost-effective way systems with multiple XTH to install. The frame is supplied with: Mounted DC overcurrent circuit breaker, mounted DC fuses, mounted DIN-rails. Protection for wiring of the auxiliary contacts. Connecting tube for AC wiring. Screw for the frame. In the event of a power failure, the power inverters switch off, even if you have solar panels on your house. Thus, the solar generator is then useless. The Solsafe Box is the ultimate solution to this problem. RCC: "BACKGROUND white" 02 Remote Control: The Xtender has two programmable auxiliary contacts. They allow the Xtender is used together with existing inverters and can turn on a generator start auto or trigger an alarm. The Xtender series can be programmed via the RCC 02. Supplied with two mounting screwsPart No: 390575Manufacturer: StuderProduct Weight: 2.00 kgWeight incl. Packaging: 2.00 kgDimensions: 221 x 370 x 115 mm (L x B x H)

Network cable for connecting the control panels

Network cable for connecting the control panels

Communication cable for connecting the combined inverter with remote control RCC 02/03 or to build up a three-phase systems or for parallel connection of multiple devices.

GX Touch 70: Display-ZubehörDer GX Touch 70 ist ein Display-Zubehör für den Cerbo GX. Das Sieben-Zoll-Touchscreen-Display bietet einen sofortigen Überblick über Ihr System und ermöglicht Ihnen die Anpassung von Einstellungen. Schließen Sie das Display einfach mit nur einem Kabel an den Cerbo GX an. Der GX Touch 70 hat ein wasserdichtes Gehäuse, ist von oben montierbar und einfach zu installieren.

Modbus, interface RS485, isolated, 2m cable

Der MultiPlus 12/2000/80-32 kombiniert einen leistungsstarken Wechselrichter mit einem Ladegerät. Er eignet sich ideal für netzunabhängige und mobile Anwendungen und bietet eine hohe Zuverlässigkeit in anspruchsvollen Umgebungen.Technische Daten:Ausgangsleistung: 2000 VAGewicht: 11 kg

Die Wandhalterung für den GX Touch 70 bietet eine sichere Befestigung für das größere Display. Sie ist langlebig und für verschiedene Einsatzbereiche geeignet, wie Yachten oder Wohnmobile.Technische Daten:Material: Metall/Kunststoff

This panel is suitable for both multinationals and for Quattro. It allows the setting of PowerControl and PowerAssist current limit setting for two AC sources, for example for a generator and shore power. Setting range: up to 200 A. The brightness of the LEDs is automatically reduced during the night.Dimensions (HxWxD): 65 x 120 x 40 mm

Network cable for connecting the control panels

Network cable for connecting the control panels

The digital multi-control panel GX corresponds to its predecessor, but has a new design. Another advantage of this panel lies in the simple assembly: the supplied assembly frame enables the panel to assemble both from front and from behind. The mounting holes are covered by the mounting frame. The housing of the GX panels is made of plastic. This reduces the weight of the panel and it gets a modern look. The panel is suitable for both multis and quattros. It enables the setting of PowerControl and Powerassist electricity limits for two alternating current sources: for example for generator and country power. Settings area: Up to 200 A. The brightness of the LEDs is automatically reduced during the night. Dimensions (HXBXT): 65 x 120 x 40 mm

Mit dem MK3-USB lassen sich folgende Produkte zum Konfigurieren an einen Computer anschließen: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Wechselrichter (nur Modelle mit einem VE.Bus Kommunikations-Port), ECOmulti, EasySolar, EasyPlus.

The multi-Plus is a powerful inverter with pure sine wave, an advanced battery charger, which uses the adaptive charging technology, and a high-speed AC voltage transfer switch in a single compactCasing. Apart from these primary functions, the MultiPlus offers even more advanced features that are explained below.Two AC outputs: the main output provides uninterrupted operation. In the event of a power failure or an interruption of the shore / generator power the MultiPlus takes over the supply to the connected loads. This happens so quickly (in less than 20 milliseconds) that a continuous operation is ensured of computers and other electronic devices. The second output is only supplies current when the multi-Plus AC power is available at one of the inputs. Loads that should not discharge the battery, such. be as a water heater, can be connected to this output (second output is only available in models with an output power of 3000 VA and more).Practically unlimited performance using parallel circuit: up to six MNCs can be connected in parallel at high power requirements.Three phase operation: Apart from the parallel port can also three units of the same model for a three-phase output can be configured.Power Control: Dealing with limited generator, shore side or grid power. With the Multi Control Panel can be adjusted to the maximum generator or shore power. The MultiPlus will then take account of other AC loads and uses to charge only the current that is still "left". Thus, preventing the generator or shore supply from being overloaded.Power Assist: This feature allows the power control principle on a new dimension. It allows the MultiPlus to support capacity of the alternative sources. Peak power is so often required only for a limited period. In such a case, the multi-Plus ensure that a compensating insufficient shore or generator power immediately by energy from the battery. If the load is reduced, d. H. Consumers are turned off, then back enough available energy can be used to charge the batteries.Four stage adaptive charger and two batteries: The main output makes using the advanced "adaptive charging" software for a powerful charge to the battery system software fine-tunes the automatic three-stage charging process in order to adapt it to best suit the battery status In addition, it adds.. a fourth stage added for long periods of float charging. Besides that invites the MultiPlus even a second battery by using an independent trickle charge output (trickle charge output only at 12 V and 24 V models available). If settings have to be changed, this can be within a few minutes using carried the new DIP switch setting procedure.MultiPlus- Battery voltage 12 V C 12/2000 / 80-30- Power Control / Power Assist: yes- Transfer switch: 30 A- parallel and three-phase operation: yesINVERTER- Input voltage range: 9.5 to 17 V (VDC)- Output: Output voltage: 230 V AC ± 2% Frequency: 50 Hz ± 0.1%- cont. Output power at 25 ° C: 2000 VA **- cont. Ausgangsleistg. at 25 ° C: 1600 W- cont. Ausgangsleistg. at 40 ° C: 1450 W- Peak power: 4000 W- Max. Efficiency: 93%- Zero-load power: 9 W- Zero-load power in AES mode: 7 W- Zero-load power in search mode: 3 WCHARGER- AC input: Input voltage range: 187-265VAC, input frequency: 45-65 Hz / Power Factor: 1- Constant Charging Voltage: 14.4 V DC- Conservation charging voltage: 13.8 V DC- Storage mode: 13.2 V DC- Charge current house battery: 80 A- Charge current starter battery: 4 A- Battery temperature sensor: yesGENERAL- Additional output (A): no- Programmable relay: relay adjustable u. a. as an alarm relay or Start- / stop function for an aggregate- Protection: Output short circuit, overload, battery over-voltage, low battery voltage, over temperature, 230 V AC on inverter output to high input voltage ripple- VE. Bus Interface: For parallel and three phase operation, remote monitoring and system integrationNo: - COM port for general use- Common features: Operating Temperature Range: -20 to + 50 ° C (forced ventilation), protection class IP21- Battery connection: M8 bolts- 230 V AC outlet: spring clip- Weight: 18 kg- dimensions (HxBxT): 520 x 255 x 125 mm** Non-linear load, crest factor 3: 1

Der Victron MultiPlus 48/2000/25-32 ist ein leistungsstarker Sinus-Wechselrichter mit integriertem Batterieladegerät und schnellem AC-Transfer-Schalter. Er bietet eine flexible Stromversorgung, besonders bei Netzausfällen, da er die Stromversorgung ohne Unterbrechung übernimmt. Es können bis zu sechs Geräte parallel betrieben werden, um die Leistung zu erhöhen. Technische Daten:- Maße: 240 x 590 x 330 mm- Gewicht: ca. 13 kg- Nennleistung: 2000 VA- Ladeleistung: 25 A- Ausgangsspannung: 230 V

Der Quattro ist ein Wechselrichter/Ladegerät und entspricht damit dem Multiplus, zusätzlich verfügt der Quattro jedoch über zwei Wechselstromeingänge mit integrierten Transferschalter damit ist es möglich den Quattro an einen oder zwei Generatoren anzuschließen. Der Quattro verbindet sich automatisch mit der aktiven Quelle. Der Quattro ist ein leistungsfähiger Wechselrichter mit reiner Sinuswelle, ein fortschrittlicher Batterielader, der die adaptive Ladetechnologie nutzt, und ein Hochgeschwindigkeits-Wechselspannungs-Transferschalter in einem einzigen kompakten Gehäuse. Abgesehen von diesen primären Funktionen bietet der Quattro noch mehrere erweiterte Funktionen, die im Folgenden erläutert werden.Zwei Wechselstromausgänge: der Hauptausgang stellt einen unterbrechungsfreien Betrieb sicher. Im Falle eines Netzausfalls oder bei einer Unterbrechung des Land-/Generatorstroms übernimmt der Quattro die Versorgung der angeschlossenen Verbraucher. Die Umschaltung geschieht so schnell (in weniger als 20 Millisekunden), dass ein unterbrechungsfreier Betrieb von Computern und anderen elektronischen Geräten gewährleistet ist. Der zweite Ausgang liefert nur dann Strom, wenn an einem der Eingänge des Quattro Wechselstrom verfügbar ist. Verbraucher, die die Batterie nicht entladen dürfen, wie z. B. ein Wassererhitzer, können an diesen Ausgang angeschlossen werden (ein zweiter Ausgang ist nur bei Modellen mit einer Ausgangsleistung von 3000 VA und mehr verfügbar).Praktisch unbegrenzte Leistung durch Parallelschaltung: bis zu sechs Quattros können bei hohem Leistungsbedarf parallel geschaltet werden.Drei Phasen-Betrieb: Abgesehen von dem parallelen Anschluss, können auch drei Einheiten desselben Modells für einen Drei-Phasen-Ausgang konfiguriert werden.PowerControl: Arbeiten mit begrenzter Generatorleistung, eingeschränktem Land- oder Netzstrom. Mit dem Fernbedienungspaneel Multi Control kann der maximal zu entnehmende Netz- bzw. Generatorstrom eingestellt werden. Der Quattro nimmt dann Rücksicht auf weitere angeschlossene Wechselstromverbraucher und nutzt zum Laden nur den Strom, der noch „übrig" ist. So wird verhindert, dass der Generator oder der Landstromanschluss überlastet wird.PowerAssist: Mit dieser Funktion erhält das PowerControl-Prinzip eine neue Dimension. Sie ermöglicht, dass der Quattro zu schwach ausgelegte alternative Quellen unterstützt. Lastspitzen treten häufig nur für einen begrenzten Zeitraum auf. In einem solchen Fall stellt der Quattro sicher, dass eine zu schwache Landstrom- bzw. Generatorleistung sofort durch Energie aus der Batterie kompensiert wird. Wird die Last reduziert, d. h. werden Verbraucher ausgeschaltet, kann die dann wieder ausreichend vorhandene Energie zum Laden der Batterien genutzt werden.Vierstufiges adaptives Ladegerät und Laden zweier Batterien: Der Hauptausgang sorgt mithilfe der fortschrittlichen „adaptiven Lade-"Software für ein leistungsstarkes Laden des Batteriesystems. Die Software nimmt eine Feineinstellung des automatischen, dreistufigen Ladevorgangs vor, um ihn bestmöglich an den Batteriezustand anzupassen. Außerdem fügt sie noch eine vierte Stufe für lange Zeiträume im Erhaltungsmodus hinzu. Abgesehen davon lädt der Quattro auch noch eine zweite Batterie, indem er einen unabhängigen Erhaltungsladungsausgang verwendet (Erhaltungsladeausgang nur bei 12 V und 24 V Modellen erhältlich). Wenn Einstellungen verändert werden müssen, kann dies innerhalb von ein paar Minuten mithilfe des neuen DIP-Schalter-Einstellungsverfahrens erfolgen. - Batteriespannung 48V- Power Control / Power Assist: ja- Transfer-Schalter: 50 A- Parallelschaltung und Drei-Phasen-Betrieb: jaWECHSELRICHTER - Eingangsspannungsbereich: 38-66 V (V DC)- Ausgang: Ausgangsspannung: 230 V AC ±2%, Frequenz: 50 Hz ±0,1%- kont. Ausgangsleistung bei 25°C: 5000 VA **- kont. Ausgangsleistg. bei 25°C: 4000 W- kont. Ausgangsleistg. bei 40°C: 3700 W- Spitzenleistung: 9000 W- Max. Wirkungsgrad: 94 %- Null-Last Leistung: 25 W- Null-Last Leistung im AES-Modus: 20 W- Null-Last Leistung im Such-Modus: 5 WLADEGERÄT - Wechselstrom-Eingang: Eingangsspannungsbereich: 187-265VAC, Eingangsfrequenz: 45-65 Hz / Leistungsfaktor: 1- Konstant-Ladespannung: 57,6 V DC- Erhaltungs-Ladesspannung: 55,2 V DC- Lagerungsmodus: 52,8 V DC- Ladestrom Hausbatterie: 70 A- Batterie-Temperatur-Sensor: jaALLGEMEINES - Zusatzausgang (A): ja (32 A)- Programmierbares Relais: Relais einstellbar u. a. als Alarm-Relais oder Start- / Stopp-Funktion für ein Aggregat- Schutz: Ausgangskurzschluss, Überlast, Batterie-Überspannung, Batterie-Unterspannung, Übertemperatur, 230 V AC am Wechselrichterausgang, zu hohe Brummspannung am Eingang- VE. Bus-Schnittstelle: Bei Parallelschaltungen und Drei-Phasen-Betrieb, Fernüberwachung und Systemintegration- COM-Port für allgemeine Nutzung: Auf Anfrage- Gemeinsame Merkmale: Betriebstemperaturbereich: -20 bis +50°C (Gebläselüftung), Schutzklasse: IP21- Batterie-Anschluss: Vier M8 Bolzen (2+ / 2-)- 230 V Wechselstrom-Anschluss: Schraubenklemmen 13 mm²- Gewicht: 29 kg- Maße (HxBxT): 565 x 320 x 148 mm. Bei diesem Artikel handelt es sich um Sperrgut. Aufgrund der Größe, des Gewichts oder der Beschaffenheit des Artikels fallen in diesem Fall zusätzliche Versandkosten an, die zusätzlich berechnet werden.

The Quattro is an inverter / charger and thus corresponds to the MultiPlus, in addition, however, the Quattro features two AC inputs with integrated transfer switch so that it is possible to Quattro to one or to connect two generators. The Quattro will automatically connect to the active source.The Quattro is a powerful inverter with pure sine wave, an advanced battery charger, which uses the adaptive charging technology, and a high-speed AC voltage transfer switch in a single compact enclosure. Apart from these primary functions of Quattro offers even more advanced features that are explained below.Two AC outputs: the main output provides uninterrupted operation. In the event of a power failure or an interruption of the shore / generator power the Quattro takes over the supply to the connected loads. This happens so quickly (in less than 20 milliseconds) that a continuous operation is ensured of computers and other electronic devices. , The second output is live only when AC of the Quattro AC power is available at one of the entrances. Loads that should not discharge the battery, such. be as a water heater, can be connected to this output (second output is only available in models with an output power of 3000 VA and more).Practically unlimited performance using parallel circuit: up to six Quattro can be connected in parallel at high power requirements.Three phase operation: Apart from the parallel port can also three units of the same model for a three-phase output can be configured.Power Control: Dealing with limited generator, shore side or grid power. With the Multi Control Panel can be adjusted to the maximum generator or shore power. The Quattro will then take account of other AC loads and uses to charge only the current that is still "left". Thus, preventing the generator or shore supply from being overloaded.Power Assist: This feature allows the power control principle on a new dimension. It allows the Quattro support to capacity of the alternative sources. Peak power is so often required only for a limited period. In such a case, the Quattro ensure that a compensating insufficient shore or generator power immediately by energy from the battery. If the load is reduced, d. H. Consumers are turned off, then back enough available energy can be used to charge the batteries.Four stage adaptive charger and two batteries: The main output makes using the advanced "adaptive charging" software for a powerful charge to the battery system software fine-tunes the automatic three-stage charging process in order to adapt it to best suit the battery status In addition, it adds.. a fourth stage added for long periods of float charging. Besides that invites the Quattro even a second battery by using an independent trickle charge output (trickle charge output only at 12 V and 24 V models available). If settings have to be changed, this can be within a few minutes using carried the new DIP switch setting procedure.- Battery voltage 12 V: 12/5000 / 200-100- Power Control / Power Assist: yes- transfer switch 100 A- parallel and three-phase operation: yesINVERTER- Input voltage range: 9.5 -17 V (V DC)- Output: Output voltage: 230 V AC ± 2% Frequency: 50 Hz ± 0.1%- cont. Output power at 25 ° C: 5000 VA **- cont. Ausgangsleistg. at 25 ° C: 4500 W- cont. Ausgangsleistg. at 40 ° C: 4000 W- peak power: 10,000 W- Max. Efficiency: 94%- Zero-load power: 25 W- Zero-load power in AES mode: 20 W- Zero-load power in search mode: 5 WCHARGER- AC input: Input voltage range: 187-265VAC, input frequency: 45-65 Hz / Power Factor: 1- Constant Charging Voltage: 14.4 V DC- Conservation charging voltage: 13.8V DC- Storage mode: 13.2 V DC- Charge current house battery 200 A- Charge current starter battery: 4 A- Battery temperature sensor: yesGENERAL- Programmable relay: relay adjustable u. a. as alarm relays or start / stop function for an aggregate- Protection: Output short circuit, overload, battery over-voltage, low battery voltage, over temperature, 230 V AC on inverter output to high input voltage ripple- VE. Bus Interface: For parallel and three phase operation, remote monitoring and system integration- COM port for general use: On request- Common features: Operating Temperature Range: -20 to + 50 ° C (forced ventilation), protection class IP21- Battery Connection: four M8 bolts (2+ / 2)- 230 V AC Connection: Screw terminals 13 mm²- Weight: 34 kg- dimensions (HxBxT): 470 x 350 x 280 mm

The Quattro is an inverter/charger and thus corresponds to the multiplus, but the Quattro also has two alternating current inputs with integrated transfer switch so that it is possible to connect the Quattro to one or two generators. The Quattro automatically connects to the active source.The Quattro is a powerful inverter with a pure sinus wave, an advanced battery loader that uses adaptive charging technology, and a high-speed change voltage transfer switch in a single compact housing. Apart from these primary functions, the Quattro offers several extended functions that are explained below.Two alternating current outputs: The main exit ensures uninterrupted operation. In the event of a network failure or if the land/generator current is interrupted, the Quattro takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if an alternating current is available on one of the inputs of the Quattro. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output (a second output is only available for models with an output power of 3000 VA and more).Practically unlimited performance through parallel circuit: up to six quattros can be switched in parallel with high power requirements.Three phase operation: Apart from the parallel connection, three units of the same model can also be configured for a three-phase output.PowerControl: Working with limited generator performance, limited land or network current. With the remote control panel Multi Control, the maximum network or generator current can be set. The Quattro then takes into account other connected alternating current consumers and only uses the electricity for charging, which is still "left". This prevents the generator or the land power connection from being overloaded.Power Assist: With this function, the PowerControl principle receives a new dimension. It enables the Quattro to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Quattro ensures that an excessive land current or generator output is immediately compensated for by energy from the battery. The load is reduced, i.e. H. If consumers are switched off, the energy that is then sufficiently existing can be used again to load the batteries.Four-stage adaptive charger and loading of two batteries: The main output using the advanced "adaptive charging" software ensures that the battery system is powerful. Another fourth stage for long periods of time in conservation mode. Apart from that, the Quattro also loads a second battery by using an independent maintenance load output (conservation load output only available from 12 V and 24 V models). If settings have to be changed, this can be changed within of a few minutes using the new DIP switch setting process.- Battery voltage 24 V: 24/5000/120-100- Power Control / Power Assist: Yes- Transfer switch: 100 a-Parallel circuit and three-phase operation: YesInverter- Input voltage area: 19-33 V (V DC)- Exit: output voltage: 230 V AC ± 2%, frequency: 50 Hz ± 0.1%- Kont. Output power at 25 ° C: 5000 VA **- Kont. Output power. at 25 ° C: 4500 W- Kont. Output power. at 40 ° C: 4000 W- Top performance: 10,000 W- Max. Effect: 94 %- Zero-load performance: 25 W-Zero-load performance in AES mode: 20 W-Zero-load performance in search mode: 5 WCHARGER-AC input: Input voltage area: 187-265VAC, input frequency: 45-65 Hz / performance factor: 1- Constant charging voltage: 28.8 V DC- Conservation charging voltage: 27.6 V DC- Storage mode: 26.4 V DC- charging current house battery: 120 a- Charging current starter battery: 4 a-Battery temperature sensor: YesGeneral- Additional outcome (A): Yes (25 a)- Programmable relay: relay adjustable and a. As an alarm relay or start / stop function for an aggregate-Protection: output ceiling, overload, battery overvoltage, battery sub voltage, over temperature, 230 V AC at the inverter output, too high humming voltage at the input- Ve. Bus interface: for parallel circuits and three-phase operation, remote monitoring and system integration- Com port for general use: on request- Common features: operating temperature range: -20 to +50 ° C (blower testing), protection class: IP21-Battery connection: Four M8 bolts (2+ / 2-)- 230 V AC connection: screw terminals 13 mm²- Weight: 30 kg- Dimensions (HXBXT): 444 x 328 x 240 mm. This article is a blocking goods. Due to the size, weight or nature of the article, there are additional shipping costs in this case, which are also calculated.

The Quattro is an inverter/charger and thus corresponds to the multiplus, but the Quattro also has two alternating current inputs with integrated transfer switch so that it is possible to connect the Quattro to one or two generators. The Quattro automatically connects to the active source.The Quattro is a powerful inverter with a pure sinus wave, an advanced battery loader that uses adaptive charging technology, and a high-speed change voltage transfer switch in a single compact housing. Apart from these primary functions, the Quattro offers several extended functions that are explained below.Two alternating current outputs: The main exit ensures uninterrupted operation. In the event of a network failure or if the land/generator current is interrupted, the Quattro takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if an alternating current is available on one of the inputs of the Quattro. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output (a second output is only available for models with an output power of 3000 VA and more).Practically unlimited performance through parallel circuit: up to six quattros can be switched in parallel with high power requirements.Three phase operation: Apart from the parallel connection, three units of the same model can also be configured for a three-phase output.PowerControl: Working with limited generator performance, limited land or network current. With the remote control panel Multi Control, the maximum network or generator current can be set. The Quattro then takes into account other connected alternating current consumers and only uses the electricity for charging, which is still "left". This prevents the generator or the land power connection from being overloaded.Power Assist: With this function, the PowerControl principle receives a new dimension. It enables the Quattro to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Quattro ensures that an excessive land current or generator output is immediately compensated for by energy from the battery. The load is reduced, i.e. H. If consumers are switched off, the energy that is then sufficiently existing can be used again to load the batteries.Four-stage adaptive charger and loading of two batteries: The main output using the advanced "adaptive charging" software ensures that the battery system is powerful. Another fourth stage for long periods of time in conservation mode. Apart from that, the Quattro also loads a second battery by using an independent maintenance load output (conservation load output only available from 12 V and 24 V models). If settings have to be changed, this can be changed within of a few minutes using the new DIP switch setting process.- Battery voltage 24 V: 24/8000/200-100/100- Power Control / Power Assist: Yes- Transfer switch: 100 a-Parallel circuit and three-phase operation: YesInverter- Input voltage area: 19-33 V (V DC)- Exit: output voltage: 230 V AC ± 2%, frequency: 50 Hz ± 0.1%- Kont. Output power at 25 ° C: 8000 VA **- Kont. Output power. at 25 ° C: 6500 W- Kont. Output power. at 40 ° C: 5500 W- Top performance: 16,000 W- Max. Effect: 94 %- Zero-load performance: 45 W-Zero-load performance in AES mode: 30 W-Zero-load performance in search mode: 10 WCHARGER-AC input: Input voltage area: 187-265VAC, input frequency: 45-65 Hz / performance factor: 1- Constant charging voltage: 28.8 V DC- Conservation charging voltage: 27.6 V DC- Storage mode: 26.4 V DC- charging current house battery: 200 a- Charging current starter battery: 4 a-Battery temperature sensor: YesGeneral- Additional outcome (A): Yes (50 a)- Programmable relay: relay adjustable and a. As an alarm relay or start / stop function for an aggregate-Protection: output ceiling, overload, battery overvoltage, battery sub voltage, over temperature, 230 V AC at the inverter output, too high humming voltage at the input- Ve. Bus interface: for parallel circuits and three-phase operation, remote monitoring and system integration- Com port for general use: on request- Common features: operating temperature range: -20 to +50 ° C (blower testing), protection class: IP21-Battery connection: Four M8 bolts (2+ / 2-)- 230 V AC connection: screw terminals 13 mm²- Weight: 45 kg- Dimensions (HXBXT): 470 x 350 x 280 mm. This article is a blocking goods. Due to the size, weight or nature of the article, there are additional shipping costs in this case, which are also calculated.

The Quattro is an inverter/charger and thus corresponds to the multiplus, but the Quattro also has two alternating current inputs with integrated transfer switch so that it is possible to connect the Quattro to one or two generators. The Quattro automatically connects to the active source.The Quattro is a powerful inverter with a pure sinus wave, an advanced battery loader that uses adaptive charging technology, and a high-speed change voltage transfer switch in a single compact housing. Apart from these primary functions, the Quattro offers several extended functions that are explained below.Two alternating current outputs: The main exit ensures uninterrupted operation. In the event of a network failure or if the land/generator current is interrupted, the Quattro takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if an alternating current is available on one of the inputs of the Quattro. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output (a second output is only available for models with an output power of 3000 VA and more).Practically unlimited performance through parallel circuit: up to six quattros can be switched in parallel with high power requirements.Three phase operation: Apart from the parallel connection, three units of the same model can also be configured for a three-phase output.PowerControl: Working with limited generator performance, limited land or network current. With the remote control panel Multi Control, the maximum network or generator current can be set. The Quattro then takes into account other connected alternating current consumers and only uses the electricity for charging, which is still "left". This prevents the generator or the land power connection from being overloaded.Power Assist: With this function, the PowerControl principle receives a new dimension. It enables the Quattro to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Quattro ensures that an excessive land current or generator output is immediately compensated for by energy from the battery. The load is reduced, i.e. H. If consumers are switched off, the energy that is then sufficiently existing can be used again to load the batteries.Four-stage adaptive charger and loading of two batteries: The main output using the advanced "adaptive charging" software ensures that the battery system is powerful. Another fourth stage for long periods of time in conservation mode. Apart from that, the Quattro also loads a second battery by using an independent maintenance load output (conservation load output only available from 12 V and 24 V models). If settings have to be changed, this can be changed within of a few minutes using the new DIP switch setting process.- Battery voltage 48 V: 48/100-100/100- Power Control / Power Assist: Yes- Transfer switch: 100 a-Parallel circuit and three-phase operation: YesInverter- Input voltage area: 38-66 V (V DC)- Exit: output voltage: 230 V AC ± 2%, frequency: 50 Hz ± 0.1%- Kont. Output power at 25 ° C: 10,000 VA **- Kont. Output power. at 25 ° C: 8,000 W- Kont. Output power. at 40 ° C: 6,500 W- Top performance: 20,000W- Max. Effect: 96 %- Zero-load performance: 55 W-Zero-load performance in AES mode: 35 W-Zero-load performance in search mode: 20 WCHARGER-AC input: Input voltage area: 187-265VAC, input frequency: 45-65 Hz / performance factor: 1- Constant charging voltage: 57.6 V DC- Conservation charging voltage: 55.2 DC- Storage mode: 52.8 V DC- charging current house battery: 140 a-Battery temperature sensor: YesGeneral- Additional outcome (A): Yes (50 a)- Programmable relay: relay adjustable and a. As an alarm relay or start / stop function for an aggregate-Protection: output ceiling, overload, battery overvoltage, battery sub voltage, over temperature, 230 V AC at the inverter output, too high humming voltage at the input- Ve. Bus interface: for parallel circuits and three-phase operation, remote monitoring and system integration- Com port for general use: on request- Common features: operating temperature range: -20 to +50 ° C (blower testing), protection class: IP21-Battery connection: Four M8 bolts (2+ / 2-)- 230 V AC connection: screw terminals 13 mm²- Weight: 45 kg- Dimensions (HXBXT): 470 x 350 x 280 mm. This article is a blocking goods. Due to the size, weight or nature of the article, there are additional shipping costs in this case, which are also calculated.

The Quattro is an inverter/charger and thus corresponds to the multiplus, but the Quattro also has two alternating current inputs with integrated transfer switch so that it is possible to connect the Quattro to one or two generators. The Quattro automatically connects to the active source.The Quattro is a powerful inverter with a pure sinus wave, an advanced battery loader that uses adaptive charging technology, and a high-speed change voltage transfer switch in a single compact housing. Apart from these primary functions, the Quattro offers several extended functions that are explained below.Two alternating current outputs: The main exit ensures uninterrupted operation. In the event of a network failure or if the land/generator current is interrupted, the Quattro takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if an alternating current is available on one of the inputs of the Quattro. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output (a second output is only available for models with an output power of 3000 VA and more).Practically unlimited performance through parallel circuit: up to six quattros can be switched in parallel with high power requirements.Three phase operation: Apart from the parallel connection, three units of the same model can also be configured for a three-phase output.PowerControl: Working with limited generator performance, limited land or network current. With the remote control panel Multi Control, the maximum network or generator current can be set. The Quattro then takes into account other connected alternating current consumers and only uses the electricity for charging, which is still "left". This prevents the generator or the land power connection from being overloaded.Power Assist: With this function, the PowerControl principle receives a new dimension. It enables the Quattro to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Quattro ensures that an excessive land current or generator output is immediately compensated for by energy from the battery. The load is reduced, i.e. H. If consumers are switched off, the energy that is then sufficiently existing can be used again to load the batteries.Four-stage adaptive charger and loading of two batteries: The main output using the advanced "adaptive charging" software ensures that the battery system is powerful. Another fourth stage for long periods of time in conservation mode. Apart from that, the Quattro also loads a second battery by using an independent maintenance load output (conservation load output only available from 12 V and 24 V models). If settings have to be changed, this can be changed within of a few minutes using the new DIP switch setting process.- Battery voltage 48 V: 48/5000/70-100/100- Power Control / Power Assist: Yes- Transfer switch: 100 a-Parallel circuit and three-phase operation: YesInverter- Input voltage area: 38-66 V (V DC)- Exit: output voltage: 230 V AC ± 2%, frequency: 50 Hz ± 0.1%- Kont. Output power at 25 ° C: 5000 VA **- Kont. Output power. at 25 ° C: 4000 W- Kont. Output power. at 40 ° C: 3700 W- Top performance: 10,000W- Max. Effect: 95 %- Zero-load performance: 35 W-Zero-load performance in AES mode: 30 W-Zero-load performance in search mode: 15 WCHARGER-AC input: Input voltage area: 187-265VAC, input frequency: 45-65 Hz / performance factor: 1- Constant charging voltage: 57.6 V DC- Conservation charging voltage: 55.2 DC- Storage mode: 52.8 V DC- charging current house battery: 70 a-Battery temperature sensor: YesGeneral- Additional outcome (A): Yes (50 a)- Programmable relay: relay adjustable and a. As an alarm relay or start / stop function for an aggregate-Protection: output ceiling, overload, battery overvoltage, battery sub voltage, over temperature, 230 V AC at the inverter output, too high humming voltage at the input- Ve. Bus interface: for parallel circuits and three-phase operation, remote monitoring and system integration- Com port for general use: on request- Common features: operating temperature range: -20 to +50 ° C (blower testing), protection class: IP21-Battery connection: Four M8 bolts (2+ / 2-)- 230 V AC connection: screw terminals 13 mm²- Weight: 30 kg- Dimensions (HXBXT): 444 x 328 x 240 mm. This article is a blocking goods. Due to the size, weight or nature of the article, there are additional shipping costs in this case, which are also calculated.

The Quattro is a powerful inverter with pure sine wave, an advanced battery charger, which uses the adaptive charging technology, and a high-speed AC voltage transfer switch in a single compact enclosure. Apart from these primary functions of Quattro offers even more advanced features that are explained below.Two AC outputs: the main output provides uninterrupted operation. In the event of a power failure or an interruption of the shore / generator power the Quattro takes over the supply to the connected loads. This happens so quickly (in less than 20 milliseconds) that a continuous operation is ensured of computers and other electronic devices. , The second output is live only when AC of the Quattro AC power is available at one of the entrances. Loads that should not discharge the battery, such. be as a water heater, can be connected to this output (second output is only available in models with an output power of 3000 VA and more).Practically unlimited performance using parallel circuit: up to six Quattro can be connected in parallel at high power requirements.Three phase operation: Apart from the parallel port can also three units of the same model for a three-phase output can be configured.Power Control: Dealing with limited generator, shore side or grid power. With the Multi Control Panel can be adjusted to the maximum generator or shore power. The Quattro will then take account of other AC loads and uses to charge only the current that is still "left". Thus, preventing the generator or shore supply from being overloaded.Power Assist: This feature allows the power control principle on a new dimension. It allows the Quattro support to capacity of the alternative sources. Peak power is so often required only for a limited period. In such a case, the Quattro ensure that a compensating insufficient shore or generator power immediately by energy from the battery. If the load is reduced, d. H. Consumers are turned off, then back enough available energy can be used to charge the batteries.Four stage adaptive charger and two batteries: The main output makes using the advanced "adaptive charging" software for a powerful charge to the battery system software fine-tunes the automatic three-stage charging process in order to adapt it to best suit the battery status In addition, it adds.. a fourth stage added for long periods of float charging. Besides that invites the Quattro even a second battery by using an independent trickle charge output (trickle charge output only at 12 V and 24 V models available). If settings have to be changed, this can be within a few minutes using carried the new DIP switch setting procedure.- Battery voltage 48 V: 48/15000 / 200-100 / 100- Power Control / Power Assist: yes- transfer switch 100 A- parallel and three-phase operation: yesINVERTER- Input voltage range: 38-66 V (V DC)- Output: Output voltage: 230 V AC ± 2% Frequency: 50 Hz ± 0.1%- cont. Output power at 25 ° C: 15000 VA **- cont. Ausgangsleistg. at 25 ° C: 12,000 W- cont. Ausgangsleistg. at 40 ° C: 10,000 W- Peak power: 25.000W- Max. Efficiency: 96%- Zero-load power: 80 W- Zero-load power in AES mode: 50 W- Zero-load power in search mode: 30 WCHARGER- AC input: Input voltage range: 187-265VAC, input frequency: 45-65 Hz / Power Factor: 1- Constant Charging Voltage: 57.6 V DC- Conservation charging voltage: 55.2 DC- Storage mode 52.8 V DC- Charge current house battery 200 A- Battery temperature sensor: yesGENERAL- Additional output (A): yes (50 A)- Programmable relay: relay adjustable u. a. as alarm relays or start / stop function for an aggregate- Protection: Output short circuit, overload, battery over-voltage, low battery voltage, over temperature, 230 V AC on inverter output to high input voltage ripple- VE. Bus Interface: For parallel and three phase operation, remote monitoring and system integration- COM port for general use: On request- Common features: Operating Temperature Range: -20 to + 50 ° C (forced ventilation), protection class IP21- Battery Connection: four M8 bolts (2+ / 2)- 230 V AC Connection: Screw terminals 13 mm²- Weight: 72 kg- Dimensions (HxWxD): 572 x 488 x 344 mm