Batteriemonitore und SmartShunts von Victron

The intelligent battery shuntThe Smartshunt is an all-in-one battery device, only without a display. Your phone acts as a display. The Smartshunt connects via Bluetooth with the VictronConnect app on your phone (or tablet) and you can read all monitored battery parameters such as loading time, remaining term, course information and much more.Alternatively, the Smartshunt can be connected and read by a GX device. The Smartshunt is connected via a VE.Direct cable.The Smartshunt is a good alternative for BMV battery monitoring, especially for systems in which battery monitoring is required, but less wiring and disorder is required.The Smartshunt is equipped with Bluetooth, a Ve.Direct port and a connection that can be used for the following: monitoring of a second battery, the center monitoring or a temperature sensor.Tension range power supply 6.5 - 70 VDCElectricity recording

The intelligent battery shuntThe Smart Hunt is an all-in-one battery monitor, only without the display. Your phone acts as a display. The Smart Hunt connects via Bluetooth with the VictronConnect app on your phone (or tablet) and you can read all monitored battery parameters such as charge status, remaining time, course information and much more comfortable.Alternatively, the Smart Hunt can be connected and be read by a GX device. Connection to the Smart Hunt via a VE.Direct cable.The Smart Hunt is a good alternative for a BMV battery monitor, especially for systems where a battery monitoring is required, but less wiring and disorder is desired.The Smart Hunt is equipped with Bluetooth, a VE.Direct port and a compound that can be used for: monitoring a second battery monitoring center or a temperature sensor.Power supply voltage range from 6.5 to 70 VDCCurrent consumption

The intelligent battery shuntThe Smart Hunt is an all-in-one battery monitor, only without the display. Your phone acts as a display. The Smart Hunt connects via Bluetooth with the VictronConnect app on your phone (or tablet) and you can read all monitored battery parameters such as charge status, remaining time, course information and much more comfortable.Alternatively, the Smart Hunt can be connected and be read by a GX device. Connection to the Smart Hunt via a VE.Direct cable.The Smart Hunt is a good alternative for a BMV battery monitor, especially for systems where a battery monitoring is required, but less wiring and disorder is desired.The Smart Hunt is equipped with Bluetooth, a VE.Direct port and a compound that can be used for: monitoring a second battery monitoring center or a temperature sensor.Power supply voltage range from 6.5 to 70 VDCCurrent consumption

Length 0.9 m

The VE.Bus Smart Dongle combines two products:First of all, it is the Bluetooth accessory for our inverter / charger range. Multinationals, MultiPlusse, Multi-Plus II, multigrid, multigrid II, Quattro's and our model of the Phoenix inverter with a VE.Bus port.After installation, you can monitor the VictronConnect app operation and also operate the system: changing the input current limit and switching between on, off and only charger mode.It can also serve as voltage and temperature sensor for inverter / charger.This works on all models and is particularly in combination with the multi-Plus II advantageous because this device does not have built-in connections for voltage and temperature sensors.To monitor the device smaller yachts and caravans offers a good alternative in mobile homes, to where the Color Control GX GX or Venus would be too extensive.

With its built-in Bluetooth, the BMV Smart is ready for the age of the "Internet of Things" (IdD).Most other Victron Energy products have also via Bluetooth. The wireless communication between the products, simplifying the installation of systems and improvesPower.Download the app Victron Bluetooth enabled Bluetooth with a smartphone or other device down.Using the app you can on your BMV-712 access and the mobile device:- Customize settings- display all important data on a screen,display historical data and -- upgrade to the latest software as new features become available.easy installationAll electrical connections are made with the circuit board connector on the current shunt.The shunt is connected to the guard via a standard RJ12 telephone cable.Included: RJ 12 cable (10 m) and the battery cable with fuse (2 m); There are no additional components required.In addition, a separate front bezel for square or round display; a security ring included for rear mounting and screws for front mounting.Monitoring the midpoint voltageA damaged cell or a damaged battery can destroy a whole big, expensive battery bank.If batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage.Please also note the BMV Manual, Section 5.2 for more information.We recommend that our Battery Balancer (BMS012201000) in order to maximize the service life of series lead-acid batteries.Very low power consumption from the batteryPower consumption: 0.7 Ah per month (1 mA) at 12 V and 0.6 Ah per month (0.8 mA) at 24 VIn particular, lithium-ion batteries have almost no capacity when discharged to shutdown due to low voltage desired.After switching off due to low voltage, the reserve capacity of a lithium-ion battery is about 1 per 1,000 Ah Ah battery capacity.The battery will be damaged if the remaining reserve capacity is taken from the battery.A residual current of 10 mA, for example, may damage a 200 Ah battery, when the system is left to stand for 8 days in a discharged state.Bistable alarm relaysPrevent an increased current consumption in the event of an alarm.Other features- battery voltage, current, power, consumed ampere hours and charging status- remaining time at current discharge- Programmable visual and audible alarm- Programmable relay to minor loads off or turn on a generator as needed.- A 500 ampere quick-connect shunt and a connection set.- shunt capacitance of up to 10,000 amperes selectable.- VE.Direct communication port- Saves a wide range of historical data can be evaluated on the basis of those usage patterns and battery condition.- Wide input voltage range: 6.5 - 70V- High current measurement resolution 10 mA (0.01 A)- Additional input for measuring voltage (a second battery), temperature or midpoint voltage and associated alarm and relay settings.Power supply voltage range from 6.5 to 70 VDCCurrent consumption; backlight

With its built-in Bluetooth, the BMV Smart is ready for the age of the "Internet of Things" (IdD).Most other Victron Energy products have also via Bluetooth. The wireless communication between the products, simplifying the installation of systems and improvesPower.Download the app Victron Bluetooth enabled Bluetooth with a smartphone or other device down.Using the app you can on your BMV-712 access and the mobile device:- Customize settings- display all important data on a screen,display historical data and -- upgrade to the latest software as new features become available.easy installationAll electrical connections are made with the circuit board connector on the current shunt.The shunt is connected to the guard via a standard RJ12 telephone cable.Included: RJ 12 cable (10 m) and the battery cable with fuse (2 m); There are no additional components required.In addition, a separate front bezel for square or round display; a security ring included for rear mounting and screws for front mounting.Monitoring the midpoint voltageA damaged cell or a damaged battery can destroy a whole big, expensive battery bank.If batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage.Please also note the BMV Manual, Section 5.2 for more information.We recommend that our Battery Balancer (BMS012201000) in order to maximize the service life of series lead-acid batteries.Very low power consumption from the batteryPower consumption: 0.7 Ah per month (1 mA) at 12 V and 0.6 Ah per month (0.8 mA) at 24 VIn particular, lithium-ion batteries have almost no capacity when discharged to shutdown due to low voltage desired.After switching off due to low voltage, the reserve capacity of a lithium-ion battery is about 1 per 1,000 Ah Ah battery capacity.The battery will be damaged if the remaining reserve capacity is taken from the battery.A residual current of 10 mA, for example, may damage a 200 Ah battery, when the system is left to stand for 8 days in a discharged state.Bistable alarm relaysPrevent an increased current consumption in the event of an alarm.Other features- battery voltage, current, power, consumed ampere hours and charging status- remaining time at current discharge- Programmable visual and audible alarm- Programmable relay to minor loads off or turn on a generator as needed.- A 500 ampere quick-connect shunt and a connection set.- shunt capacitance of up to 10,000 amperes selectable.- VE.Direct communication port- Saves a wide range of historical data can be evaluated on the basis of those usage patterns and battery condition.- Wide input voltage range: 6.5 - 70V- High current measurement resolution 10 mA (0.01 A)- Additional input for measuring voltage (a second battery), temperature or midpoint voltage and associated alarm and relay settings.Power supply voltage range from 6.5 to 70 VDCCurrent consumption; backlight

Using the ve.direct to bluetooth smart dongle you can display your bmv or mppt information on iOS and Android devices, using the VictronConnect app.

The main task of a battery lesser is to calculate consumption and to determine the state of charge. The consumption in ampers hours is determined by the time integration of the current flow from the battery. With constant current flow, this corresponds to the multiplication of the electricity value over time. An over 2 hours of fluid discharge flow of e.g. 10 A results in a consumption of 20 AH. The Victron battery monitors work with a powerful microprocessor programmed in accordance with the tasks.In addition to the characteristics of the BMV-700, the BMV-702 is able to measure the tension of a second battery.Standard information and alarms:- Battery voltage (V)- Battery load / discharge (w)- Consumption in ampè resting hours (AH) / Kilowatt hours (kWh)- Battery load / discharge electricity (a)- Remaining term in the current consumption- Alarm or generator Startrelais programmable.- Optical and acoustic alarm: over and under tension, and / or empty battery- Charging status (%)- Very low consumption: 4 mA at12 V and 3 MA at 24 V- very easy to connect: is delivered with shunt, 10 meters RJ 12 UTP cable and 2 meter battery cable including fuse. More is not required- easy -to -build control panel (round or rectangular); Ring for hidden installation in terms of screws for assembly assembly- Very further tension range: 9.5 - 95 VDC without resistanceInput voltage area: 9.5 - 90 V DCElectricity intake (without backlight):

The main task of a battery lesser is to calculate consumption and to determine the state of charge. The consumption in ampers hours is determined by the time integration of the current flow from the battery. With constant current flow, this corresponds to the multiplication of the electricity value over time. An over 2 hours of fluid discharge flow of e.g. 10 A results in a consumption of 20 AH. The Victron battery monitors work with a powerful microprocessor programmed in accordance with the tasks.In addition to the characteristics of the BMV-700, the BMV-702 is able to measure the tension of a second battery.Standard information and alarms:- Battery voltage (V)- Battery load / discharge (w)- Consumption in ampè resting hours (AH) / Kilowatt hours (kWh)- Battery load / discharge electricity (a)- Remaining term in the current consumption- Alarm or generator Startrelais programmable.- Optical and acoustic alarm: over and under tension, and / or empty battery- Charging status (%)- Very low consumption: 4 mA at12 V and 3 MA at 24 V- very easy to connect: is delivered with shunt, 10 meters RJ 12 UTP cable and 2 meter battery cable including fuse. More is not required- easy -to -build control panel (round or rectangular); Ring for hidden installation in terms of screws for assembly assembly- Very further tension range: 9.5 - 95 VDC without resistanceInput voltage area: 9.5 - 90 V DCElectricity intake (without backlight):

The main task of a battery lesser is to calculate consumption and to determine the state of charge. The consumption in ampers hours is determined by the time integration of the current flow from the battery. With constant current flow, this corresponds to the multiplication of the electricity value over time. An over 2 hours of fluid discharge flow of e.g. 10 A results in a consumption of 20 AH. The Victron battery monitors work with a powerful microprocessor programmed in accordance with the tasks.In addition to the characteristics of the BMV-700, the BMV-702 is able to measure the tension of a second battery.Standard information and alarms:- Battery voltage (V)- Battery load / discharge (w)- Consumption in ampè resting hours (AH) / Kilowatt hours (kWh)- Battery load / discharge electricity (a)- Remaining term in the current consumption- Alarm or generator Startrelais programmable.- Optical and acoustic alarm: over and under tension, and / or empty battery- Charging status (%)- Very low consumption: 4 mA at12 V and 3 MA at 24 V- very easy to connect: is delivered with shunt, 10 meters RJ 12 UTP cable and 2 meter battery cable including fuse. More is not required- easy -to -build control panel (round or rectangular); Ring for hidden installation in terms of screws for assembly assembly- Very further tension range: 9.5 - 95 VDC without resistanceInput voltage area: 9.5 - 90 V DCElectricity intake (without backlight):