Blue Sea

The EV remote advertisement panel offers two options for monitoring your batteries.When connecting to a P12 battery charger, it can be an overview of the operating status of the device. The voltage, the charging current and the current charging phase are displayed for each output. Any disorders are also reported. Displays the operating state of the charger and enables the basic functions to be checked.- automatically recognizes up to 3 batteries- AC symbol shows that the land connection is located and the charger is in operation- Plain text error messages in the event of disturbance of the charger- Display via DIP switch selectable: graphic voltage display or operating state charger- Graphical voltage display, even if the land connection is not active- Automatic shutdown after 4 hours adjustable- Light, OLED display, which can be read in sunlight- Dimensions (WXHXT) 119 x 81 x 30 mm- Display (WXH) 55 x 28 mm

!!! Assembly and operating instructions exclusively in English !!!- Three charging outputs for simultaneous load of up to three batteries-charging characteristics for lead-acid, gel and AGM batteries selectable by the user- Tax option for separating relays, prevents the automatic switching on voltage -controlled separating relay and thus enables a proper charge for each battery- Battery temperature compensation, protection against battery over and under temperature- Large input voltage range 90 - 265 V AC 50/60 Hz enables global use. The operation in ports with poor electrical systems or with on -board generators is also possible without any problems- Device overheating protection- Protection against overvoltage, short circuit and reelviation- The robust ribbed aluminum housing and a large internal heat sink derives the heat, which means that the fan must run less often and a longer lifespan of the components is achieved- PreFloat ™ controls the absorption period and its switchover in the maintenance charge for each battery output to prevent an overload- Large, bright LC display with clear information in plain text- Charge coordination controls the Blue-Sea ACR separating relay for an optimal battery charge in the harbor and via the alternator at sea- Extensive diagnostic options via the display- Optional remote controlTechnical specifications:- charging current 25 a- Nominal voltage 12 V DC- charging outputs 3- Recommended battery capacity 60 - 330 Ah- Maximum adjustable output voltage 16 V DC- Max. Deviation of the output voltage 0.05 V DC- Input voltage range 90 - 265 V AC- Network frequency 50 /60 Hz- Operating temperature range -20 - +70 ° C- Storage temperature range -30 - +80 ° C- Dimensions (LXBXH) 331 x 215 x 93 mm- Weight 5.9 kg

Suitable for P12 battery charger and OLED temperature ads- Temperature range -40 ° C to 80 ° C- Delivery including double -sided adhesive pad- Waterproof execution- Length of the connecting cable approx. 45 cm

!!! Assembly and operating instructions exclusively in English !!!- Three charging outputs for simultaneous load of up to three batteries-charging characteristics for lead-acid, gel and AGM batteries selectable by the user- Tax option for separating relays, prevents the automatic switching on voltage -controlled separating relay and thus enables a proper charge for each battery- Battery temperature compensation, protection against battery over and under temperature- Large input voltage range 90 - 265 V AC 50/60 Hz enables global use. The operation in ports with poor electrical systems or with on -board generators is also possible without any problems- Device overheating protection- Protection against overvoltage, short circuit and reelviation- The robust ribbed aluminum housing and a large internal heat sink derives the heat, which means that the fan must run less often and a longer lifespan of the components is achieved- PreFloat ™ controls the absorption period and its switchover in the maintenance charge for each battery output to prevent an overload- Large, bright LC display with clear information in plain text- Charge coordination controls the Blue-Sea ACR separating relay for an optimal battery charge in the harbor and via the alternator at sea- Extensive diagnostic options via the display- Optional remote controlTechnical specifications:- charging current 40 a- Nominal voltage 12 V DC- charging outputs 3- Recommended battery capacity 60 - 440 Ah- Maximum adjustable output voltage 16 V DC- Max. Deviation of the output voltage 0.05 V DC- Input voltage range 90 - 265 V AC- Network frequency 50 /60 Hz- Operating temperature range -20 - +70 ° C- Storage temperature range -30 - +80 ° C- Dimensions (LXBXH) 331 x 215 x 93 mm- Weight 5.9 kg

Displays the operating state of the charger and enables the basic functions to be checked.LED displays:- Charging control and display of the load level (Bulk, absorption, float, equalize)- Operating state fan- Charging current for three outputs separated into 6 stages each- warning lights for temperature, fan, entrance, output, batteryOperation of:- Operating state fan-brightness of the LED displays / alarm reset- Reduction of the output power, if the land connection is limited by securing,- charger on / standby- Dimensions (WXH) 106 x 78 mm- Structure height 16 mm plus. 11 mm installation depth (plug connection)