Studer Xtender Accessories

will be ordered for you

Phaesun - Remote control Studer XCOM -RS485i

Modbus, interface RS485, isolated, 2m cable

€342.90* €403.77* (15.08% saved vs. recommended price)
previously €342.90*

will be ordered for you

Phaesun - Communication setting Studer XCOM -LAN

X-Connect System: The X-Connect System offers a flexible and inexpensive way to install systems with several XTH. The frame is delivered with: assembled DC overcurrent control switch, assembled DC faults, assembled DIN rails. Protection for wiring the auxiliary contacts. Connection tube for AC cabling. Screw connection for the frame. In the event of a power failure, the network inverters switch off even if they have a solar system on their house. Thus, the solar generator then becomes useless. The Solsafe Box is the ultimate solution for this problem. "Background: White" RCC 02 Remote Control: The Xtender has 2 programmable aid contacts. They enable the Xtender to be used together with existing inverters and can switch on a car start generator or trigger an alarm. The Xtender series can be programmed via the RCC 02.Communication module with XCOM-231i, Ethernet bridge and all necessary accessoriesArticle No.: 390765Manufacturer: StuderProduct weight: 0.70 kgWeight including packaging: 0.70 kgDimensions: 0 x 0 x 0 mm (L x W x H)

€683.40* €804.32* (15.03% saved vs. recommended price)
previously €683.40*

will be ordered for you

Phaesun - communication set Studer XCOM -GSM

X-Connect System: The X-Connect System offers a flexible and cost-effective way systems with multiple XTH to install. The frame is supplied with: Mounted DC overcurrent circuit breaker, mounted DC fuses, mounted DIN-rails. Protection for wiring of the auxiliary contacts. Connecting tube for AC wiring. Screw for the frame. In the event of a power failure, the power inverters switch off, even if you have solar panels on your house. Thus, the solar generator is then useless. The Solsafe Box is the ultimate solution to this problem. RCC: "BACKGROUND white" 02 Remote Control: The Xtender has two programmable auxiliary contacts. They allow the Xtender is used together with existing inverters and can turn on a generator start auto or trigger an alarm. The Xtender series can be programmed via the RCC 02. Communication module with Xcom-231i, GSM modem and all necessary accessoriesPart No: 390764Manufacturer: StuderProduct Weight: 1.00 kgWeight incl. Packaging: 1.10 kgDimensions: 0 x 0 x 0 mm (L x B x H)

€674.90* €793.97* (15% saved vs. recommended price)
previously €674.90*

1 in stock

Phaesun - External ventilation unit Studer IP54 ECF -01 for XTS

X-Connect System: The X-Connect System offers a flexible and cost-effective way systems with multiple XTH to install. The frame is supplied with: Mounted DC overcurrent circuit breaker, mounted DC fuses, mounted DIN-rails. Protection for wiring of the auxiliary contacts. Connecting tube for AC wiring. Screw for the frame. In the event of a power failure, the power inverters switch off, even if you have solar panels on your house. Thus, the solar generator is then useless. The Solsafe Box is the ultimate solution to this problem. RCC: "BACKGROUND white" 02 Remote Control: The Xtender has two programmable auxiliary contacts. They allow the Xtender is used together with existing inverters and can turn on a generator start auto or trigger an alarm. The Xtender series can be programmed via the RCC 02. Supplied with two mounting screwsPart No: 390575Manufacturer: StuderProduct Weight: 2.00 kgWeight incl. Packaging: 2.00 kgDimensions: 221 x 370 x 115 mm (L x B x H)

€115.40* €135.78* (15.01% saved vs. recommended price)
previously €115.40*

will be ordered for you

Phaesun - Relay Studer Option module ARM -02

X-Connect System: The X-Connect System offers a flexible and cost-effective way systems with multiple XTH to install. The frame is supplied with: Mounted DC overcurrent circuit breaker, mounted DC fuses, mounted DIN-rails. Protection for wiring of the auxiliary contacts. Connecting tube for AC wiring. Screw for the frame. In the event of a power failure, the power inverters switch off, even if you have solar panels on your house. Thus, the solar generator is then useless. The Solsafe Box is the ultimate solution to this problem. RCC: "BACKGROUND white" 02 Remote Control: The Xtender has two programmable auxiliary contacts. They allow the Xtender is used together with existing inverters and can turn on a generator start auto or trigger an alarm. The Xtender series can be programmed via the RCC 02. Auxiliary Relay solar module ARM-02Part No: 390553Manufacturer: StuderProduct Weight: 0.20 kgWeight incl. Packaging: 0.20 kgDimensions: 45 x 73 x 45 mm (L x B x H)

€59.90* €70.69* (15.26% saved vs. recommended price)
previously €59.90*

will be ordered for you

Phaesun - Battery status display Studer BSP 1200

The BSP Finds is Place in Any System Xtender and Deals with Voltage from 12 to 48 VDC. Designed with a Highly Performing Algorithm, it Communicates to Accurate State of Charge of the Battery in Real Time in Order To, For Instance, Start Automatical A Generator or Operate A Loadshedding Ots of Secondary Importance. Display, Datalogging, Graphicalally Displaid State of Charge History and Programming Are possible by Means of the RCC-02/-03.Battery charging state display and real-time data processing system, for monitoring lead-acid batteries (12, 24 OR 48V in the Xtender series; including 5M cable and 1200a shunt. (TCM-01 is required for XTS models)Article No.: 390319Manufacturer: StuderProduct weight: 0.90 kgWeight including packaging: 1.55 kgDimensions: 110.5 x 75 x 26 mm (L x W x H)

€504.40* €593.69* (15.04% saved vs. recommended price)
previously €504.40*

will be ordered for you

Phaesun - Battery status display Studer BSP 500

The BSP is finds place in any system XTENDER and deals with Voltages from 12 to 48 VDC. Designed with a highly performing algorithm, it Communicates to accurate state of charge of the battery in real time in order to, for instance, start automatically a generator or to operate a LoadShedding om öoads of secondary importance. Display, data logging, graphically displaid state of charge history and programming are possible by Means of the RCC-02 / -03. Battery charging state display and real-time data processing system, for monitoring of lead-acid batteries (12, 24 or 48V in the Xtenders series; is TCM-01 required including 5m cable and 500A shunt (XTS models).Part No: 390318Manufacturer: StuderProduct Weight: 0.80 kgWeight incl. Packaging: 0.90 kgDimensions: 110.5 x 75 x 26 mm (L x B x H)

€471.40* €554.66* (15.01% saved vs. recommended price)
previously €471.40*

will be ordered for you

Phaesun - Remote control Studer XCOM -232i

X-Connect System: The X-Connect System offers a flexible and inexpensive way to install systems with several XTH. The frame is delivered with: assembled DC overcurrent control switch, assembled DC faults, assembled DIN rails. Protection for wiring the auxiliary contacts. Connection tube for AC cabling. Screw connection for the frame. In the event of a power failure, the network inverters switch off even if they have a solar system on their house. Thus, the solar generator then becomes useless. The Solsafe Box is the ultimate solution for this problem. "Background: White" RCC 02 Remote Control: The Xtender has 2 programmable aid contacts. They enable the Xtender to be used together with existing inverters and can switch on a car start generator or trigger an alarm. The Xtender series can be programmed via the RCC 02.Isolated RS232 communication module with 2m cableArticle No.: 390293Manufacturer: StuderProduct weight: 1.00 kgWeight including packaging: 1.10 kgDimensions: 110.5 x 75 x 26 mm (L x W x H)

€329.90* €388.18* (15.01% saved vs. recommended price)
previously €329.90*

will be ordered for you

Phaesun - temperature sensor Studer BTS -01

X-Connect System: The X-Connect System offers a flexible and cost-effective way systems with multiple XTH to install. The frame is supplied with: Mounted DC overcurrent circuit breaker, mounted DC fuses, mounted DIN-rails. Protection for wiring of the auxiliary contacts. Connecting tube for AC wiring. Screw for the frame. In the event of a power failure, the power inverters switch off, even if you have solar panels on your house. Thus, the solar generator is then useless. The Solsafe Box is the ultimate solution to this problem. RCC: "BACKGROUND white" 02 Remote Control: The Xtender has two programmable auxiliary contacts. They allow the Xtender is used together with existing inverters and can turn on a generator start auto or trigger an alarm. The Xtender series can be programmed via the RCC 02. Battery temperature sensor incl. 5m cable for Xtender SeriesPart No: 106391Manufacturer: StuderProduct Weight: 0.05 kgWeight incl. Packaging: 0.40 kgDimensions: 60 x 51 x 22 mm (L x B x H)

€46.90* €55.10* (14.88% saved vs. recommended price)
previously €46.90*

will be ordered for you

Phaesun - remote control Studer RCC -03

X-Connect System: The X-Connect System offers a flexible and inexpensive way to install systems with several XTH. The frame is delivered with: assembled DC overcurrent control switch, assembled DC faults, assembled DIN rails. Protection for wiring the auxiliary contacts. Connection tube for AC cabling. Screw connection for the frame. In the event of a power failure, the network inverters switch off even if they have a solar system on their house. Thus, the solar generator then becomes useless. The Solsafe Box is the ultimate solution for this problem. "Background: White" RCC 02 Remote Control: The Xtender has 2 programmable aid contacts. They enable the Xtender to be used together with existing inverters and can switch on a car start generator or trigger an alarm. The Xtender series can be programmed via the RCC 02.Remote control and programming, building assembly, system monitoring, parameter setting, monitoring, incl. 2m cable for XTH inverter 2m cable for xtender seriesArticle No.: 106386Manufacturer: StuderProduct weight: 0.35 kgWeight including packaging: 1.10 kgDimensions: 130 x 120 x 45 mm (L x W x H)

€272.40* €320.47* (15% saved vs. recommended price)
previously €272.40*

1 in stock

Phaesun - remote control Studer RCC -02

X-Connect System: The X-Connect System offers a flexible and inexpensive way to install systems with several XTH. The frame is delivered with: assembled DC overcurrent control switch, assembled DC faults, assembled DIN rails. Protection for wiring the auxiliary contacts. Connection tube for AC cabling. Screw connection for the frame. In the event of a power failure, the network inverters switch off even if they have a solar system on their house. Thus, the solar generator then becomes useless. The Solsafe Box is the ultimate solution for this problem. "Background: White" RCC 02 Remote Control: The Xtender has 2 programmable aid contacts. They enable the Xtender to be used together with existing inverters and can switch on a car start generator or trigger an alarm. The Xtender series can be programmed via the RCC 02.Remote control and programming, front display, system monitoring, parameter setting, data logger, monitoring, incl. 2m cable for xtender seriesArticle No.: 106385Manufacturer: StuderProduct weight: 0.40 kgWeight including packaging: 1.20 kgDimensions: 170 x 168 x 43.5 mm (L x W x H)

€247.90* €291.91* (15.08% saved vs. recommended price)
previously €247.90*

will be ordered for you

Phaesun - control cabinet Studer X -Connect System

Preliminary assembly plate for 3 x -tender, (multisystem)Article No.: 106024Manufacturer: StuderProduct weight: 15.00 kgWeight including packaging: 29.60 kgDimensions: 0 x 0 x 0 mm (L x W x H)Preliminary assembly plate for 3 x -tender, (multisystem)Article No.: 106024Manufacturer: StuderProduct weight: 15.00 kgWeight including packaging: 29.60 kgDimensions: 0 x 0 x 0 mm (L x W x H)

€1,643.40* €1,933.27* (14.99% saved vs. recommended price)
previously €1,643.40*

will be ordered for you

PHILIPPI - Cable RJ45 20m

Communication cable for connecting the combined inverter with remote control RCC 02/03 or to build up a three-phase systems or for parallel connection of multiple devices.

€50.40* €53.00* (4.91% saved vs. recommended price)
previously €50.40*

will be ordered for you

PHILIPPI - Cable RJ45 5m

Communication cable for connecting the combined inverter with remote control RCC 02/03 or to build up a three-phase systems or for parallel connection of multiple devices.

€26.40* €28.00* (5.71% saved vs. recommended price)
previously €26.40*

will be ordered for you

Philippi - connecting cable RJ45 2M

Communication cable for connecting the combined inverter with remote control RCC 02/03 or to build up a three-phase systems or for parallel connection of multiple devices.

€14.40* €15.00* (4% saved vs. recommended price)
previously €14.40*

will be ordered for you

Philippi - temperature sensor BTS for Xtender series

Temperature sensor BTS for Xtender series

€41.90* €44.00* (4.77% saved vs. recommended price)
previously €41.90*

will be ordered for you

Philippi-Sinus combi inverter Xcom 232i

Communication interface CAN / RS-232 and data logger module for X-Tender XTS / XTM / XTH / VT.Dimensions: L 113 x W 76 x H 25 mm

€306.90* €323.00* (4.98% saved vs. recommended price)
previously €306.90*

will be ordered for you

Philippi - FB for charging inverter including cable

Remote control for charging invertersCombination type RCC-03 incl. 2mConnection cable, S/N @

€253.40* €267.00* (5.09% saved vs. recommended price)
previously €253.40*

will be ordered for you

Philippi - Remote control for charging inverters