Simrad

active depths / temperature breakdown encoder 235 kHz transducer with a 2 m (7 ft) long cable and Micro-C connector.Tilt 0%. The encoder has NO connection for an analog speed sensor (ST800)!

The bright, high -resolution IS35, which is easy to see during the day and night, offers an intelligent interface to machine data, fuel efficiency, depth and much more. This digital measuring device automatically shows the most important information from the on-board electronics of your boat and can easily be retrofitted instead of a standard analog measuring device.! Minimum requirements for the product!The monitoring of the engine and fuel consumption require one or more engines or sensors connected to NMEA 2000®. Additional hardware such as a GPS receiver or a deep-wing writer may be required for further functions. The available data records vary depending on the connected sensors.-Light, optically connected 3.5-inch color display- Easy switching between several pages with information- Automatic configuration shows the data relevant to your boat- monitor up to two engines connected to NMEA 2000®- Pre -set pages for engine monitoring, fuel consumption, - journeys, control and depth- Easy installation and configuration! Easy to install or retrofit!The IS35 is designed in such a way that it fits standard-shaped 85 mm cutouts (3 3/8 inches) to enable a direct replacement for conventional analog speed or speed measuring devices. The low 8 millimeter profile fits seamlessly with our Glass Bridge displays, and the IS35 can also be installed flush with an optional bracket. Only an NMEA 2000® cable is required to connect to your system, no separate power supply is required.Weight 0.60 lbs (0.28 kg)Electricity consumption 130mA @13.5VDisplay size 3.5 "diagonal color 4: 3 aspect ratioType Bonded Transmissive TFT-LCD-White LED backlightResolution 320 x 240 pixelsLighting white (day mode) / red (night mode)Protection class IPX7Compass safety distance 0.3 m (1.0 feet)Operating temperature -15 ° C to 55 ° C (+5 ° f to 131 ° f)Storage temperature -25c to 65c (-13f to 149f)Connectivity integrated 1.2 m (4ft) cable with micro-C connectorScope of delivery including display cover 000-11773-001.

Simrad IS42 instrument display, including DST810 transducer and NMEA 2000 Starter KitThe IS42 instrument display is to allow the clearest Mehrzweckinstrument- and autopilot display is a 4.1-inch color screen, the optical tied around no condensation.With transflexiver LCD technology for exceptional contrast and visibility in all lighting conditions for a greater range Triton² is clearly the first choice.Product features:· Optical bound 4.1-inch color display· Transflective LCD technology for optimum visibility in sunshine· Product features:· Optical bound 4.1-inch color display· Transflective LCD technology for optimum visibility in sunshine· Unfangreiche display functions for motor data· AIS repeater with target filtering messages and DSC call· Shows wind, speed, depth, heading, autopilot status and more· Easy to use, easy installation· NMEA 2000® certified· Low profile design· Low energy consumptionTechnical specifications:· Dimensions 118 x 115 x 28 mm (4.6 x 4.5 x 1.1 inches)· Weight 0.32 kg (0.3 lb)· Power consumption 1.8 W (MAX)· Network load 3 LEN· Color: Black· Display size 4.1-inch (diagonal) 4: 3 aspect ratio· Display Type Transflective TFT LCD, tied White LED backlight· Display Resolution 320 x 240 pixels· Lighting White for daylight mode, red, green, blue or white for night mode· Waterproof IPx7DST810 depth, speed and temperature sensor for IS42. A compact multi-sensor data over depth, speed and temperature provides, by a single sensor on the lift, which can be easily installed and connected directly to the network.The main functions:· Combined Speed

The DSt810 delivers depth, speed and temperature data with only one hull breakthrough.The signal processing integrated in the donor provides the data in the NMEA2000 format in the connected network.The data can be displayed by card ploters, radar equipment or various instrument systems.This can also be used by other manufacturers such as Raymarine, Garmin or Furuno for all suitable display devices.With low installation effort, for example, your card plotter can be expanded to include echo oil and log function.New-The wireless Bluetooth connection to Airmar's CAST app offers new user-friendly advantages:- Calibrate the DST810 in a simple and intuitive way, regardless of the instrument brand or the model on board- Perform basic and extended heel -compensated speed calibrations to improve performance in the entire speed range- The extended speed calibration enables manual speed inputs for several heel angles and up to 10 speeds that were previously only possible via expensive PC software- Activate and deactivate PGNs and determine offset and outdoor ratesRange of the BTLE connection: approx. 10 meters, depending on the location.- Frequency: 235 kHz- Lot depth approx. (Min./Max.): 0.5 m / 100 m- Rumping angle at the installation location up to 22 ° possible- Voltage supply: 9 - 16 V DC,

Control of up to six multi-function displaysAutopilot remote control via any connected network displayHigh quality knobs made of aluminum with integrated cursor functionsMOB functionAvailable in portrait or landscape orientation tigerSlim design - ideal for mounting at the card tableFlat 8 mm profile allows dashboard assemblyFlush, flush mounting, thanks to the optional bracketIntegrated speaker with high decibels for critical alarmsFast switching between screens thanks to dedicated button and LED indicatorsIndividual NMEA 2000® connection

The AP44 autopilot controller combines Simrad Continuum control technology with a full color display, intuitive hub and key management as well as the modern glass helmet styling.Get rid of the reach of the steering wheel, you cruise with comfort and discover new ways to search for fish.This special controller provides easy access to automated turning pattern, no-drift control, depth contour tracking and other advanced pilot functions.Connect your plotter to add to Navigation waypoints and routes, and enjoy the full autopilot control of compatible Simrad displays.Alternatively, you can use the AP44 IS42 and OP12, the combination of Simrad.Product features:· Optical bound 4.1-inch color display· Extra-wide 170-degree viewing angle· Simrad Continuum control technology· Intuitive autopilot control with simple menus and waterproof silicone keys· Quick and easy course adjustment via rotary switch· Automatic turning patterns for fuel-efficient hands-free maneuvers· The no-drift control also keeps you from wind and tide on track· The depth contour tracing fishing on reefs and abysses makes it easy· Easy setup with automatic tuning and calibration· Flat Glass helmet design· Low energy consumption· Certified NMEA 2000® portTechnical specifications:· Dimensions 60 x 115 x 32 mm (2.4 x 4.5 x 1.3 inches)· Weight 0.12 kg (0.3 lb)· Power consumption 1.4 W· Network load 3 LEN· Color: Black· Waterproof IPx7

Simrad - Op12 Autopilot control panelThe SIMRAD OP12 pilot controller can be combined with the IS42 instrument display into a fully functional autopilot control panel. Take full control over the autopilot with the simple key field with seven keys, it was designed for safe and reliable operation under all conditions.The pilot controller benefits from B&GS intelligent sailing-specific functions for compass and wind control and, with Smart Tack and Smart Gybe, ensures simple and safe maneuvers, the integration of Zeus MfDS or vulcan card plotters, delivers space and route navigation.Product characteristics:· Intuitive operation· Easy installation· Combine with IS42 instrument display for full pilot control· Compatible with the new Simrad Nac-2 and NAC-3 pilot computers· Flat design· NMEA 2000® certifiedTechnical specifications:· Dimensions 60 x 115 x 32 mm (2.4 x 4.5 x 1.3 inches)· Weight 0.12 kg (0.3 lb)· Electricity consumption 1.4 W· Network load 3 len· Color: Black· Waterproof IPX7

The IS42 instrument display is the clearest multi-purpose instrument and autopilot display, with a 4.1-inch color screen that is optical bound not to allow condensation.With transflexive LCD technology for exceptional contrast and visibility in all lighting conditions, Triton² is clearly the first choice for a greater range.Product characteristics:· Visually bound 4.1-inch color display· Transflective LCD technology for the optimal view of sunshine· Product characteristics:· Visually bound 4.1-inch color display· Transflective LCD technology for the optimal view of sunshine· Incredible display functions for engine data· AIS repeater with target filtering, news and DSC call· Shows wind, speed, depth, course, autopilot status and more· Easy operation, easy installation· NMEA 2000® certified· Flat design· Low energy consumptionTechnical specifications:· Dimensions 118 x 115 x 28 mm (4.6 x 4.5 x 1.1 inches)· Weight 0.32 kg (0.3 lb)· Electricity consumption 1.8 W (max)· Network load 3 len· Color: Black· Display size 4.1 inches (diagonal) 4: 3 aspect ratio· Display type Transflective TFT-LCD, bound white LED rear light· Display resolution 320 x 240 pixels· Lighting white for daylight mode red, green, blue or white for night mode· Waterproof IPX7

The DSt800 delivers depth, speed and temperature data with only one hull breakthrough. The signal processing integrated in the donor provides the data in the NMEA0183 format. The data can be displayed by card ploters, radar equipment or various instrument systems.With low installation effort, for example, your card plotter can be expanded to include echo oil and log function.- Frequency: 235 kHz- Lot depth (min./max.): 0.5 m / 100 m- Voltage supply: 10 - 25 V DC,

Accessories for IS20 marine instruments20 m (66 ft) cable (Simnet) for wind masting unit

Through Hull Stainless Steel Skin FittingStainless steel installation sleeveAccessories for Triducer or Airmar Geber of the Smart Sensors series(for use with DSt800, DT800, ST800, DSt810)With setback valve.

Accessories for IS20 marine instrumentsPassive S/T-Sensor, TH, plastic with 2 m (7 ft) cable (for speed and temperature only in connection with D800 Art.No. 22098560)

active depths / temperature breakdown encoder 235 kHz transducer with a 2 m (7 ft) long cable and Micro-C connector.Tilt 0%. The encoder has NO connection for an analog speed sensor (ST800)!