NASA Zubehör

11 in stock

NASA - Loggeber - replacement paddle wheels

Replacement paddle wheel for speed transducer

€20.90* €22.50* (7.11% saved vs. recommended price)

Backordered

NASA - indoor installation kit for depth transducer

In hulls from GRP solid laminate sonar transducer can be installed inside. The vibrator is installed in the filled with mineral oil reservoir.Dimensions (diameter xH.): 43 x 105 mm.Additional nut for the transducer is supplied.

€34.90* €38.00* (8.16% saved vs. recommended price)

Backordered

NASA - replacement wind flag for windmaker V2.0 / wireless

Replacement wind flag, usable for all NASA Marine Marine Windmesser of the new generation (V2.0).Suitable for:Clipper Wireless Wind (wireless donor)Clipper Tactical WindClipper Wind V2.0Target Wind V2.0Cruiser Wind V2.0.

€30.90* €34.20* (9.65% saved vs. recommended price)

5 in stock

NASA - protective cap cover - for clipper

For navigation equipment display NASA ClipperDimensions:Outside: 112.5 x 112.5 x 31.4 mmInside: 110 x 110 mm

€15.01* €16.00* (6.19% saved vs. recommended price)

Backordered

NASA - speed transducer - cap

Cap for speed transducer

€12.90* €14.20* (9.15% saved vs. recommended price)

3 in stock

NASA - cap cover - for TARGET

For NASA TARGET navigation equipment displayDimensions:Outside: 131.8 x 98.0 x 21.0 mminside: 130.8 x 96.0 mm

€15.00* €16.00* (6.25% saved vs. recommended price)

Backordered

NASA - Echolotschwinger - 80 mm shaft length

Suitable for echolote with a frequency of 150 kHz, e.g. NASA, Seafarer. 80 mm shaft lengthCable length 7 m

€80.90* €86.80* (6.8% saved vs. recommended price)

Backordered

NASA - fastening set for wind masting unit V1.0 / V2.0

Suitable for all NASA Wind Transmitter (V1.0, V2.0 and wireless transmitter).2 plastic double clamps with stainless steel sheet metal screws

€11.99* €13.00* (7.77% saved vs. recommended price)

Backordered

NASA - speed transducer - incl. Mounting flange for breakthr

incl. Mounting flange for breakthrough

€86.90* €93.90* (7.45% saved vs. recommended price)

Backordered

NASA - Logber - Mounting fansch

Mounting fans for on -board breakthrough without a logger

€27.90* €29.60* (5.74% saved vs. recommended price)

Backordered

NASA - fattening cable for wind turbines V2.0

Mast cable as spare parts for Nasa Marine wind measuring systems V2.0 un Clipper Tactical Wind (0183 encoder).3-pin connector for connection to the mast assembly, open ends for connection to the display device.Length 20m, Color White

€49.90* €53.40* (6.55% saved vs. recommended price)

Backordered

NASA - EML -3 Pulse - Electromagnetic Log Counter - Analogous

The electromagnetic speed transducer measures the speed through the water without moving parts. He does not need a paddle wheel that could be blocked by floating debris, vegetation or shells.The transducer generates an alternating magnetic field under the boat, and measuring the resulting electric field which is generated by the boat moves through the water.With an excellent linearity interface included converts the sensor signal to boat speed, trip- and total distance. The data output in NMEA0183 format can be connected to any compatible display device that records issued "VHW" and "VLW" can play, for example, NASA - CLIPPER EASYLOG.The EML-2 encoder is exclusively suitable for mounting in the outer skin of fiberglass hulls, hulls made of steel or aluminum would affect the electromagnetic field of the encoder.Since the encoder is made of glass fiber reinforced plastic, the timer should never be mounted in wooden hulls, because swelling of the material could destroy the encoder.Can not be used with existing NASA MARINE drive measuring systems or as a replacement for conventional speed transducer NASA!Technical specifications:- measuring range rate: 0.2 - 40 knots- dissolution rate: 0.1 node- NMEA 0183 sentences: VLW + VHW- Update rate: 0.5Hz- Nominal voltage: 12V DC- Current consumption: 80mA- Material transmitter and flange: glass fiber reinforced plastic- Installation diameter sensor flange: 51mm- Connection cable encoder: 5m

€207.40* €223.00* (7% saved vs. recommended price)

3 in stock

NASA - replacement wind flag for wind direction for donor V1.0

Usable for windminders V1.0 (analog ginger without nmea).

€31.90* €34.40* (7.27% saved vs. recommended price)

Backordered

NASA - replacement wind wheel for Geber V1.0

Usable for windminders V1.0 (analog ginger without nmea).

€31.90* €34.40* (7.27% saved vs. recommended price)

1 in stock

NASA - Logger - for on -board breakthrough

Replacement logger.Delivery is carried out without assembly fans (sleeve for on -board breakthrough)

€80.90* €86.80* (6.8% saved vs. recommended price)

2 in stock

NASA - Mounting kit for depth transducer

For boats with wooden hull or GRP sandwich construction as well as in steel ships, the swinger must have direct access to the water. The streamlined plastic shape protects the swing head and prevents turbulence. The supplied tube sealing mass and the nirosta screws ensure waterproof and stable assembly.Dimensions (LXBXH): 190 x 85 x 43 mm.

€44.90* €48.70* (7.8% saved vs. recommended price)

Backordered

NASA - EML -2 - Electromagnetic logber - NMEA0183

The electromagnetic logber measures the drive through the water without moving parts. It does not require a paddle wheel that could be blocked by drift material, vegetation or shells.The encoder creates a magnetic change under the boat and measures the resulting electric field, which is generated by the boat that moves through the water.With excellent linearity, the scope of delivery converts the sensor signal at boat speed, trip and total distance. The data output in the NMEA0183 format can be connected with any compatible display device that the output data records can be reproduced "VHW" and "VLW", e.g. the NASA - Clipper Easylog.The EML-2 donor is only suitable for assembly in the outer skin of GRP shelves, steel or aluminum gumbs would influence the electromagnetic field of the encoder.Since the donor made of glass fiber is made reinforced plastic, the donor must never be mounted in wooden gumbs, since the source of the material could destroy the donor.Not usable with existing NASA marine travel measuring systems or as a replacement for defective conventional NASA log sponsors!Technical specifications:- Face measuring range: 0.2 - 40 nodes- Resolution speed: 0.1 nodes- NMEA 0183 Data records: VLW + VHW- Updaterate: 0.5Hz- Nominal voltage: 12V DC- Electricity recording: 80mA- Material giver and flange: glass fiber reinforced plastic- Installation diameter donor flange: 51mm- Connection line GENER: Length 5m

€202.90* €218.00* (6.93% saved vs. recommended price)

2 in stock

NASA - power cable for NASA weather decoder

Power cables for all NASA marine weather decoder and navtex devices, AIS em-catchers and wireless wind interface.

€15.90* €17.70* (10.17% saved vs. recommended price)

Backordered

NASA - fattening cable for wind turbines V1.0

Mast cable as a spare part for NASA Marine Wind measuring systems V1.0 (analog ginger without NMEA).5-pin connector for connection to the mast unit, open ends for connection to the display device.Length approx. 20m, color white

€49.90* €53.40* (6.55% saved vs. recommended price)

4 in stock

NASA - Ersatzlöffelrad for Wind Transmitter V2.0 / wireless

Ersatzlöffelrad, suitable for all NASA MARINE wind transmitter of the new generation (V2.0).Suitable for:CLIPPER WIND WIRELESS (wireless transmitter)CLIPPER WIND TACTICALCLIPPER WIND V2.0TARGET WIND V2.0CRUISER WIND V2.0.

€31.90* €34.40* (7.27% saved vs. recommended price)

1 in stock

NASA - Dichtungsring für Clipper Instrument

Sealing ring for clipper instrument

€5.40* €5.80* (6.9% saved vs. recommended price)

10 in stock

NASA - Echolotschwinger - Mother for the Schwinger

Suitable for sounders with a frequency of 150 kHz, e.g. NASA, Seafarer.Mother of the vibrator

€5.50* €5.90* (6.78% saved vs. recommended price)

Backordered

NASA - wireless windmaker without a display device

The NASA Marine Wind Messer does without any cable in the mast. The recipient unit, which is included, is installed under deck. The recipient is supplied with voltage via the 12 V electrical system and outputs the wind direction and speed to each NMEA0183 -compatible display via a cable connection.The mast unit only takes light daylight temporarily to load the transmitter from the transmitter via the integrated solar cell. With fully charged battery, a operation of 2,000 hours is possible without reloading.· Wireless transmission of the wind direction and speed· Display on every NMEA0183 compatible display· Simple installation - no cable in the mast required· Alignment of the advance over the recipient unit· Light weight, only 190 g· NMEA0183, 4800 Baud, data record MWV· Voltage supply (recipient): 6 - 16 V DC, approx. 17 mA· Battery time (transmitter):> 2,000 hours· Battery charging duration (transmitter): <150 hours in light daylight· Can be used for all NASA-Wind display devices with NMEA0183 input (V2.0, tactical wind and wireless wind measuring system)

€385.90* €415.00* (7.01% saved vs. recommended price)

2 in stock

NASA - extension cable 7 m for echo solot and logge

for NASA echo sounder and log,and antenna cables of NASA weather and NAVTEX receivers,Length: m. 7

€28.90* €30.80* (6.17% saved vs. recommended price)

Filter products

NASA Zubehör