Marine Instruments

Backordered

B&G - replacement battery for WS320 wind sensor

Replacement battery for WS320 wireless wind sensor.Scope of delivery:Battery pack connecting cable.The wind sensor is not part of this delivery.

€23.56* €26.18* (10.01% saved vs. recommended price)

Backordered

NASA - Loggeber - replacement paddle wheels

Replacement paddle wheel for speed transducer

€20.90* €22.50* (7.11% saved vs. recommended price)

Backordered

Navico - DSt810 -provider - depth, speed, temperature - smart

The DSt810 delivers depth, speed and temperature data with only one hull breakthrough.The signal processing integrated in the donor provides the data in the NMEA2000 format in the connected network.The data can be displayed by card ploters, radar equipment or various instrument systems.This can also be used by other manufacturers such as Raymarine, Garmin or Furuno for all suitable display devices.With low installation effort, for example, your card plotter can be expanded to include echo oil and log function.New-The wireless Bluetooth connection to Airmar's CAST app offers new user-friendly advantages:- Calibrate the DST810 in a simple and intuitive way, regardless of the instrument brand or the model on board- Perform basic and extended heel -compensated speed calibrations to improve performance in the entire speed range- The extended speed calibration enables manual speed inputs for several heel angles and up to 10 speeds that were previously only possible via expensive PC software- Activate and deactivate PGNs and determine offset and outdoor ratesRange of the BTLE connection: approx. 10 meters, depending on the location.- Frequency: 235 kHz- Lot depth approx. (Min./Max.): 0.5 m / 100 m- Rumping angle at the installation location up to 22 ° possible- Voltage supply: 9 - 16 V DC, <200 MA, integrated via NMEA2000 network-Connection cable/plug: 6 m, micro-C connector for connection to N2K or NMEA2000 network- Plastic sleeve with 51mm diameterManufacturer: Airmar for Navico (Simrad, Lowrance, B&G)

€416.62* €462.91* (10% saved vs. recommended price)

4 in stock

B&G - replacement wind spoon

Replacement wind spoon for B&G and Simrad Wreiber. Work -bound and radio.Compatible with WS310, WS320, WS700, VMHU, 608, 508, 213 and 496 sensors.Scope of delivery:Spoon wheel including fastening nut

€33.20* €36.89* (10% saved vs. recommended price)

Backordered

NASA - replacement wind flag for windmaker V2.0 / wireless

Replacement wind flag, usable for all NASA Marine Marine Windmesser of the new generation (V2.0).Suitable for:Clipper Wireless Wind (wireless donor)Clipper Tactical WindClipper Wind V2.0Target Wind V2.0Cruiser Wind V2.0.

€30.90* €34.20* (9.65% saved vs. recommended price)

Backordered

NASA - indoor installation kit for depth transducer

In hulls from GRP solid laminate sonar transducer can be installed inside. The vibrator is installed in the filled with mineral oil reservoir.Dimensions (diameter xH.): 43 x 105 mm.Additional nut for the transducer is supplied.

€34.90* €38.00* (8.16% saved vs. recommended price)

Backordered

NASA - Clipper - Duet only instrument as a spare part

Attention, this article is just about the display as a spare part.

€199.90* €215.40* (7.2% saved vs. recommended price)

Backordered

NASA - TARGET2 - Wind measuring system - wireless, complete

The new NASA TARGET2 wind measurement system can do without any cable in the mast. The recipient unit assembled below deck gives the wind direction and speed to the Target2 display or any other NMEA0183 -compatible display, e.g. B. yoursCard plotter, off.The recipient is supplied with voltage via the 12 V electrical system, the mast unit only requires light daylight temporarily to load the transmitter from the transmitter via the integrated solar cell. With fully charged battery, a operation of 2,000 hours is possible without reloading.-Suitable for the popular Target2 Navigation device series- simple installation - no cable in the mast required- Orientation of the advance over the recipient unit- Large digital display, particularly easy to read- Full 360 degree display of the wind direction with 60 segments- Red backlight- Dimensions, display device (LXBXH): 132 x 98 x 30 mm- PVC protective cap included- Suitable for cockpit assembly or outdoor driving level- NMEA0183 Data output, 4800 Baud, data record MWV- Care (display and recipient) 12 V DC, approx. 67 MA + 25 mA for lighting- Accounting time (transmitter):> 2,000 hours- Battery charging duration (transmitter): <150 hours in light daylight

€391.90* €422.00* (7.13% saved vs. recommended price)

Backordered

B&G - Sun Cover Display Protection Cap for H3000 20/20

The cover fits on the B & G H3000 series devices and 20 / 20HVThe dimension of 174mm x 110mm beträt measured from the inside

€26.78* €29.75* (9.98% saved vs. recommended price)

Backordered

NASA - protective cap cover - for clipper

For navigation equipment display NASA ClipperDimensions:Outside: 112.5 x 112.5 x 31.4 mmInside: 110 x 110 mm

€15.01* €16.00* (6.19% saved vs. recommended price)

Backordered

NASA - speed transducer - cap

Cap for speed transducer

€12.90* €14.20* (9.15% saved vs. recommended price)

Backordered

B&G - WS300 Replacement Wind Flag

Suitable for WS310 wind sensor and WS320 wireless wind sensorScope of delivery:Wind flag including fastening nut

€51.41* €57.12* (10% saved vs. recommended price)

3 in stock

NASA - cap cover - for TARGET

For NASA TARGET navigation equipment displayDimensions:Outside: 131.8 x 98.0 x 21.0 mminside: 130.8 x 96.0 mm

€15.00* €16.00* (6.25% saved vs. recommended price)

Backordered

NASA - Echolotschwinger - 80 mm shaft length

Suitable for echolote with a frequency of 150 kHz, e.g. NASA, Seafarer. 80 mm shaft lengthCable length 7 m

€80.90* €86.80* (6.8% saved vs. recommended price)

Backordered

NASA - fastening set for wind masting unit V1.0 / V2.0

Suitable for all NASA Wind Transmitter (V1.0, V2.0 and wireless transmitter).2 plastic double clamps with stainless steel sheet metal screws

€11.99* €13.00* (7.77% saved vs. recommended price)

6 in stock

VDO - OCEANLINE + OCEANLINK LENS 85MM ,

VDO - OCEANLINE + OCEANLINK LENS 85MM , Accessories Familie: Spare Parts, Spec.: Accessories 85 mmTeilesatz OL Deckglas D-85 O.L.

€53.07*

Backordered

NASA - speed transducer - incl. Mounting flange for breakthr

incl. Mounting flange for breakthrough

€86.90* €93.90* (7.45% saved vs. recommended price)

2 in stock

VDO - Viewline Universal connection cable 8 -pin

VDO - ADAPTER CABLE 8-POLE FOR TEMPERATURE, PRESSURE, FUEL LEVEL, TRIM, PYROMETER, OUTSIDE TEMPERATURE, FRESHWATER, schwarzWATER, TACHOMETER, SPEEDOMETER, Accessories Familie: ViewLine , Spec.: Accessories

€15.23*

17 in stock

VDO - Display Module, TN,+ (WWG) Oceanlink Worldwide display

VDO - DISPLAY MODULE, TN,+ (WWG) OCEANLINK WORLDWIDE Anzeige, Accessories Familie: Spare Parts, Spec.: Accessories

€89.90* €94.61* (4.98% saved vs. recommended price)

Backordered

NASA - Clipper - Wind measuring system - wireless, complete

The new NASA CLIPPER anemometer works without any cables in the mast. The mounted below deck receiver unit is via a cable connection, the wind speed and direction to the CLIPPER display or any other NMEA0183-compatible display such. as yourPlotter from.The receiver is supplied via the 12 V vehicle electrical system with voltage, the mast assembly needs only intermittently to recharge the battery of the transmitter on the integrated solar cell to bright daylight. With a fully charged battery operation of 2,000 hours is possible without recharging.- In keeping with the popular CLIPPER navigation equipment series- Easy installation - no cable required in mast- orientation of the advance direction via receiver unit- Large digital display, especially easy to read- Full 360 degree indicating the wind direction by 60 segments- Adjustable red backlighting- Dimensions, display device (W x H): 110 x 110 mm- Easy installation, mounting template is- PVC cap included- Suitable for Cockpiontage or exterior helm- NMEA0183 data output, 4800 baud, record MWV- supply (display and receiver) 12 V DC, approximately 67 mA + 25 mA for illumination- battery life (transmitter):> 2000 hours- Battery charging time (transmitter): <150 hours at broad daylight

€484.90* €522.00* (7.11% saved vs. recommended price)

Backordered

NASA - TARGET2 - Echolot

TARGET - Proven navigation equipment series of NASA- Suitable for robust sea operation- Suitable for Cockpiontage or outside helm- Easy installation, no big mounting holes- Large digital display, easy to read- backlight switched off- Simple and uncomplicated operation- PVC cap included- Power supply 12 V- Very inexpensive devices Series- dimensions (LxWxH): 132 x 98 x 30 mmTARGET2 sounder- Large digital display with 37 mm high digits- Measuring the range of 0.8 up to 100 m- Programmable Gain- Adjustable deep and shallow water alarm- External acoustic alarm- Kiel depth adjustable compensation- Sensor with 6.5 m cable included- 150 kHz oscillator- (many already mounted transmitters can be used, for example SEAFARER)- Very low power consumption, about 12 mA + 10 mA for illumination

€140.90* €152.00* (7.3% saved vs. recommended price)

1 in stock

Simrad - 20 m Simnet cable

Accessories for IS20 marine instruments20 m (66 ft) cable (Simnet) for wind masting unit

€95.32* €105.91* (10% saved vs. recommended price)

Backordered

B&G - Sun Cover Display Protection Cap for Triton²

The cover fits on the B&G Triton² instruments.

€19.28* €21.42* (9.99% saved vs. recommended price)

Backordered

NASA - cruiser wind measuring system - wireless, complete

The new NASA CRUISER anemometer works without any cables in the mast. The mounted below deck receiver unit is via a cable connection, the wind speed and direction to the CRUISER display or any other NMEA0183-compatible display such. as yourPlotter from.The receiver is supplied via the 12 V vehicle electrical system with voltage, the mast assembly needs only intermittently to recharge the battery of the transmitter on the integrated solar cell to bright daylight. With a fully charged battery operation of 2,000 hours is possible without recharging.- In keeping with the popular CDRUISER navigation equipment series- Easy installation - no cable required in mast- orientation of the advance direction via receiver unit- Large digital display, especially easy to read- Full 360 degree indicating the wind direction by 60 segments- Blue backlight- Dimensions, display device (LxWxH): 132 x 98 x 29 mm- PVC cap included- Suitable for Cockpiontage or exterior helm- NMEA0183 data output, 4800 baud, record MWV- supply (display and receiver) 12 V DC, approximately 67 mA + 25 mA for illumination- battery life (transmitter):> 2000 hours- Battery charging time (transmitter): <150 hours at broad daylight

€423.90* €456.00* (7.04% saved vs. recommended price)

Filter products

Marine Instruments