Wetterinstrumente von NASA Marine

Navtex is an international radio system sending a wide variety of news to 518 kHz in English. In addition to navigation warnings, search and rescue aviations, including weather reports as well as storm and strong wind warnings, these messages include.Many channels have already been built worldwide or under construction. The range of the Navtex channels is different from approx. 50 - 250 sm from the respective transmitter. In addition to the Navtex Frequency 518 KHz in English, there are broadcasting stations under construction, which send detailed reports in the respective state language on the frequency 490 kHz.Great Britain and France are already on the air for 490 kHz, and further stations will be followed by the next few years.Two -channel receiver 518 kHz / 490 kHz with programmable frequency circuit- Large digital display dimensions (LXB): 113 x 66 mm, with extra large font- Programmable automatic switching of the reception frequency- Graphic representation of the reception field strength- Including H-Vector activated antenna (delivery takes place without an antenna foot)- Very low power consumption: 50 MA + 100 mA for lightingExtra large font

Navtex is an international radio system sending a wide variety of news to 518 kHz in English. In addition to navigation warnings, search and rescue aviations, including weather reports as well as storm and strong wind warnings, these messages include.Many channels have already been built worldwide or under construction. The range of the Navtex channels is different from approx. 50 - 250 sm from the respective transmitter. In addition to the Navtex Frequency 518 KHz in English, there are broadcasting stations under construction, which send detailed reports in the respective state language on the frequency 490 kHz.Great Britain and France are already on the air for 490 kHz, and further stations will be followed by the next few years.With a HV antennaTwo -channel receiver 518kHz / 490kHz can be switched- All reports or transmitters freely programmable- Large digital display Dimensions (LXB): 130 x 40 mm- memory: 800 lines of 40 characters each- Graphic representation of the reception field strength- Including H-Vector activated antenna (delivery takes place without an antenna foot)- Very low power consumption: 40 MA + 200 mA for lighting- Dimensions (LXHXT): 220 x 98 x 48 x1588mm

The new bluetooth navtex is a dual frequency navtex receiver that decodes and stores navtex messages for viewing on an Android bluetooth enabled mobile phone or tablet. The unit is designed to be run continuously and have the stored messages downloaded as and when requested by the user. To Android app Enables the User to Search the Stored Messages Or to Program The Device to Display Only Wanted Message Types From Selected Station.The Internal Memory Stores in Excess of Four Hundred Typical Navtex Messages with New Messages Overwriting the Oldest. The Receiver Can Be Supplied with a Standard E-Vector Antenna Or, for more Challenging Conditions, to H-Vector Antenna is therefore Available. The Antenna Can Be Mounted on a Rail and is Connected to the Receiver Using The Seven Metre Cable Provided. A fused power cable is so supplied to connect the receiver to a permanent 12 volt power source.The Android App Can Be Freely Downloaded From The Google Play Store, For Apple Users to Optional iOS App Will Be Available From A Third Party Supplier Severe.https://play.google.com/store/details?id=uk.co.willrite.bluenavtex2&hl=enTechnical Specifications- 518 and 490kHz message reception- 12 volt supply with Low 27ma Current Consumpt- Connects to H Vector or Standard Series 2 Antenna (NC12)- Supply Voltage 10 to 16 volts DC- Dimensions 135 x 100 x 30mm- Antenna Lengmth 195mm (Complete with 7 Metre Cable)- Supplied with ative antenna, fused power cable and downloadable Android app- Compatible with Android Phones and TabletsOptional Apple IOS app Available Approximately from End of January 2018!! The app for operation and the operating instructions for this device are only available in English !!

NASA Marine-Bluetooth-Navtex receiver BT-3 with H Vector antennaThe new bluetooth navtex is a dual frequency navtex receiver that decodes and stores navtex messages for viewing on an Android bluetooth enabled mobile phone or tablet. The unit is designed to be run continuously and have the stored messages downloaded as and when requested by the user. To Android app Enables the User to Search the Stored Messages Or to Program The Device to Display Only Wanted Message Types From Selected Station.The Internal Memory Stores in Excess of Four Hundred Typical Navtex Messages with New Messages Overwriting the Oldest. The Receiver Can Be Supplied with a Standard E-Vector Antenna Or, for more Challenging Conditions, to H-Vector Antenna is therefore Available. The Antenna Can Be Mounted on a Rail and is Connected to the Receiver Using The Seven Metre Cable Provided. A fused power cable is so supplied to connect the receiver to a permanent 12 volt power source.The Android App Can Be Freely Downloaded From The Google Play Store, For Apple Users to Optional iOS App Will Be Available From A Third Party Supplier Severe.https://play.google.com/store/details?id=uk.co.willrite.bluenavtex2&hl=enThe Rail Mount is not included / The bracket shown is not included in the product.Technical Specifications- 518 and 490kHz message reception- 12 volt supply with Low 27ma Current Consumpt- Connects to H Vector or Standard Series 2 Antenna- Supply Voltage 10 to 16 volts DC- Dimensions 135 x 100 x 30mm- Antenna Lengmth 195mm (Complete with 7 Metre Cable)- Supplied with ative antenna, fused power cable and downloadable Android app- Compatible with Android Phones and TabletsOptional Apple IOS app Available Approximately End of January 2018!! The app for operation and the operating instructions for this device are only available in English !!

Navtex is an international radio system sending a wide variety of news to 518 kHz in English. In addition to navigation warnings, search and rescue aviations, including weather reports as well as storm and strong wind warnings, these messages include.Many channels have already been built worldwide or under construction. The range of the Navtex channels is different from approx. 50 - 250 sm from the respective transmitter. In addition to the Navtex Frequency 518 KHz in English, there are broadcasting stations under construction, which send detailed reports in the respective state language on the frequency 490 kHz.Great Britain and France are already on the air for 490 kHz, and further stations will be followed by the next few years.Two -channel receiver 518 kHz / 490 kHz with programmable frequency circuit- Large digital display dimensions (LXB): 113 x 66 mm, with extra large font- Programmable automatic switching of the reception frequency- Graphic representation of the reception field strength- including two-channel activated antenna (180 mm long)- Very low power consumption: 50 MA + 100 mA for lightingExtra large font

NAVTEX is an international radio system the most diverse news broadcasts on 518 kHz in English. These messages include not only navigational warnings, search and Rettungsmeidungen et al also weather reports and storm and strong wind warnings.Worldwide, many stations are already built or under construction. The range of Navtexsender varies from about 50 to 250 nm on the broadcaster. In addition to the NAVTEX frequency 518 kHz in English are broadcast stations under construction, on the frequency 490 kHz detailed reports in the local language to send.Britain and France are already for 490 kHz on the air, more stations are vorraussichtlich follow in the coming years.With rod antennaTwo channel receiver 518kHz / 490kHz switchable- All messages and channels programmable- Large Digital Display Dimensions (L x W): 130 x 40 mm- Memory: 800 lines of 40 characters- Graphical representation of the received signal strength- Including active antenna (180 mm long)- Very low power consumption: 40 mA + 200 mA for lighting- dimensions (LxHxD): 220 x 98 x 48 X1588mm

Wind sensor with fastening material and 20 m shielded, 2-wire cable.NMEA0183 records:Wind speed / direction MWV =Temperature = XDR

Marine Weatherstation - Display (without a donor unit)For every skipper who is planning a trip, information about the upcoming weather development is of the greatest importance. The Meteo Man is easy to use, reliable, robust and has low power consumption.- Barometer function with adjustable height compensation- Barograph with the display of the air pressure over a maximum of 5 days, max. Resolution 0.5 mbar- Display of wind direction and strength (when using the optional NMEA wind sensor)- Anemographer with representation of the wind speed over the past 5 days (when using the optional NMEA wind sensor)- Thermometer function for internal temperature, resolution 1 degree Celsius- Outside temperature display (when using the optional NMEA wind sensor)- Chronometer with 12 or 24 hours display- Stopwatch with the intermediate time- Race Countdown Timer, 10/5 minutes- Voleter function to display the battery voltage with 0.1 V resolution- nmea wind sensor, for wind direction, strength and outside temperature, available as accessories- Alternatively, the connection to a NASA clipper wind measuring system with NMEA output is possible (no outside temperature measurement possible)- Haster available for expansion assembly as accessories (item no. NC5)- Device dimensions (BXH): 155 x 116 mm- Installation cutout dimensions (WXHXT): 140 x 100 x approx. 60 mm- Voltage supply: 9 - 15 V DC- Electricity recording: with wind sensor ~ 100 mA, in standby <10 ma