W-LAN

Plastic flange base with adjustable fastening taps, for Glomex Webboat LiteIdeal for saling assembly

The W2K-1 is a compact, power-saving NMEA 2000 to Wi-Fi gateway with data recording. Data from a NMEA 2000 backbone is transmitted to devices such as laptops, tablets or smartphones via Wi-Fi.NMEA 2000 to Wi-Fi gateway with data recordingConversion of NMEA 2000 data from / to NMEA 0183Supports TCP and UDP and streams data from up to 3 data servers

WiFi, 3G, LTE and GSMThe all-round antenna IT2000 was specially developed for 4G (LTE), 3G, WIFI and GSM.The antenna has a diameter of 250 mm and a height of 300 mm. The weight is 500 g. The cable (50 O) is connected via an N connector.The reinforcement is:At 640-960 MHz 3DBIAt 1710-2700 MHz 5 DBIIt is a pure antenna !!!A suitable router is required for use.This is not part of the scope of delivery!

Plastic flange base with adjustable fastening straps, for GLOMEX WeBBoat 4G antenna.Ideal for Salingmontage

For mast assembly, polished material stainless steel.Discharge approx. 25 cm from the mast (depending on the assembly or mast Ø).

Stainless steel flange base for GLOMEX WeBBoat 4G antenna.Height 40 mm.

Stainless steel flange flange for antennas with 1 " / 14TPI standard thread.Height 40 mm.Weight 150 g.

2.4 GHz Marine Antenna:- White fiberglass pipe- m length about 0.35, weight 400 g- Power Gain: 8dBi- Maximum input power: 5 watts- Impedance: 50 ohms- Frequency Range: 2400 - 2500 MHz- Connector: N socket- DC Closed (reducing discharges / lightning protection)- fastening: 1 "/ 14 T.P.I. Male thread, suitable for mounting kits Art 7504 - 7506

Many marina and Marinas now offer internet access via Wireless LAN. Unfortunately, the access point is often so far from the berth, e.g. at theHarbor office that the signal strength below deck is not sufficient.By using this set, you are able to receive the WiFi signal from high distance!This WiFi set is specially designed for use on boats and yachts.The set consists of a weather-protected 2.4 GHz WiFi USB adapter and a 2.4 GHz marine antenna with 8DBI performance gain to the adapter.The WiFi USB adapter can be screwed directly to the underside of the antenna.The connection to notebook or PC is via a 5m long USB cable.For firm assembly on board, however, we recommend mounting the WiFi USB adapter below deck and connecting via a suitable coax connection (accessories) to the outdoor antenna. The antenna specially developed for the naval areacan be installed on different antenna feet using the fastening rates listed below.WLAN USB adapter:- Frequency band: 2.4 GHz (standard)- Supported WLAN standards: IEEE 802.11b: 11 Mbit / IEEE 802.11g: 54 Mbit / IEEE 802.11n: 150 Mbit- Supply performance (TX): Max. 1000MW (30dBM)*-Sensitivity to reception (RX): 802.11b: -95dBM@11MBit / 802.11g: -92dbm@54MBPS / 802.11n: -90dbbm@150MBPS- Antenna connection: N plug- I/O interface: USB 1.0/1.1/2.0 (5 m USB cable in the scope of delivery)- Supported operating systems / supplied driver: Windows 2000 / XP / Vista / 7/8/10, Linux, Mac OS2.4 GHz marine antenna:- White fiberglass tube length approx. 0.35 m, weight approx. 400 g- Provision profit: 8DBI - Maximum input performance: 5 watts- Impedance: 50 ohm - frequency range: 2400 - 2500 MHz- Connection: n socket - DC -close (reduction of static discharges / lightning protection)- Fastening: 1 “/14 T.P.I. Outside thread, suitable for fastening rates Art. 7504 - 7506* Operating notice:According to the provisions applicable in the Federal Republic of Germany and the European Union, the radiation performance of a W-LAN device may 20 dbm orDo not exceed 100 MW. The operation of the WiFi marine antenna set offered Art. 8This antenna is therefore not permitted in the field of FRG and the EU. The user is responsible for the lawful use and compliance with the provisions!