DC-DC Wandler von Victron Energy

The number of electric used on board and electronic devices is steadily increasing. In most cases these are low-voltage applications such as the navigation and radio equipment, mobile phones, hi-fi system etc. These devices are generally designed for 12 V. Victron Energy is supplying DC converter which make the 24 V onboard network a stable 12 V DC voltage available. The products are characterized by high efficiency and safety. An inferior supply can damage your sensitive equipment beyond repair. With Orion voltage transformers this danger is excluded. Beside the 24/12 V converters, other combinations are of course available. - Orion DC-DC converters Type: 24 / 12-12- Input voltage range: 18-35 V- switching off at low voltage: 14 V- restart under voltage: 18 V- Output voltage adjustable by potentiometer: No- Output voltage: 12 V- Efficiency: 95%- continuous current at output: 12 A- Maximum output current: 20 A- forced ventilation (temperature-controlled): No- Standby current: <7 mA- Remote-controlled on / off switch possible: No- weight: 0.3 kg- Dimensions HxWxD: 45 x 90 x 100 mm

Dieser isolierte DC-DC-Wandler bietet eine Leistung von 240 W und ist ideal für die Spannungsumwandlung in Fahrzeugen und Off-Grid-Anlagen. Der Orion-Tr 24/12-20 sorgt für zuverlässige Spannungsregelung.Technische Daten:- Maße: 130 x 186 x 70 mm- Gewicht: 1,2 kg- Leistung: 240 W

DC-DC converter for charging a 12V or 24V battery for vehicles equipped with an intelligent alternator(Regenerative braking, Euro 5 and 6 engines)The DC-DC converter buck-boost is a DC-DC converter for charging a 12V or 24V battery for vehicles equipped with an intelligent alternator.The converter charges the auxiliary battery with a preset charge voltage, in which high voltages (e.g., Mercedes. 15.4V) and low voltage are eliminated.System for detecting if "motor running"A deep discharge of the starter battery of the vehicle is prevented by a built-in system that detects when the "engine running".However, the converter can also be activated by a programmable input (D +, CANbus or (+) terminal 15) instead of this detection system.fully programmableThe converter can be fully programmed application PC using a simple and user-friendly.(There is a USB Type A male connector to USB type B connector is required)A product for 12V, 24V and 12 / 24V systemsThe converter can be programmed so that it loads a 12V or a 24V auxiliary battery either a 12V or a 24V alternator or a starter battery.Charge current and input current limitThe output current is determined by the following factors:- The setting of the maximum charging current.- The setting of the maximum input current.- Limiting the maximum operating temperature of the converter.Input status indicators (LED)Green: Converter is toYellow: input voltage below the threshold value, converter fromRed: Over temperature converter fromBlue, flashing quickly: engine is running, converter turns on the set delayBlue, blinking slowly: input undervoltage, converter fromStatus indicators output (LED)Green: Converter from battery voltage normalYellow: Converter from Battery LowRed: converter from the battery is discharged or not connectedPurple: converter toInput voltage range 7-35VThreshold undervoltage 10VOutput voltage range 2-30VMaximum charge current 12V: 50A 24V: 25AConverter power consumption of LEDs from (power saving mode) 7 mAOn / Off input "on" threshold voltage> 2 V, Maximum Input Voltage 60 VOperating temperature range -25 to + 80 ° C. Ambient temperature Max power: up to 40 ° Cweight 1.1kgDimensions 213 x 120 x 30mm

The number of electric used on board and electronic devices is steadily increasing. In most cases these are low-voltage applications such as the navigation and radio equipment, mobile phones, hi-fi system etc. These devices are generally designed for 12 V. Victron Energy is supplying DC converter which make the 24 V onboard network a stable 12 V DC voltage available. The products are characterized by high efficiency and safety. An inferior supply can damage your sensitive equipment beyond repair. With Orion voltage transformers this danger is excluded. Beside the 24/12 V converters, other combinations are of course available.Models with an adjustable output can be used as battery charger use. For example, for charging a 12 volt starter or additional battery in an otherwise 24 V system.In addition, all models can be connected in parallel with adjustable output, in order to increase the output current. It can be connected in parallel up to five devices. - Orion DC-DC converters Type: 24 / 12-25- Input voltage range: 18-35 V- switching off at low voltage: 14 V- restart under voltage: 18 V- output voltage adjustable by potentiometer: yes- Output voltage: 10-15 V preset 13.2V- efficiency: 96%- continuous current at output: 25 A- Maximum output current: 35 A- forced ventilation (temperature-controlled): No- Standby current: <15 mA- Remote-controlled on / off switch: yes- Weight: 0.7kg- Dimensions HxWxD: 65 x 88 x 160 mm

The number of electric used on board and electronic devices is steadily increasing. In most cases these are low-voltage applications such as the navigation and radio equipment, mobile phones, hi-fi system etc. These devices are generally designed for 12 V. Victron Energy is supplying DC converter which make the 24 V onboard network a stable 12 V DC voltage available. The products are characterized by high efficiency and safety. An inferior supply can damage your sensitive equipment beyond repair. With Orion voltage transformers this danger is excluded. Beside the 24/12 V converters, other combinations are of course available.Models with an adjustable output can be used as battery charger use. For example, for charging a 12 volt starter or additional battery in an otherwise 24 V system.In addition, all models can be connected in parallel with adjustable output, in order to increase the output current. It can be connected in parallel up to five devices. - Orion DC-DC converters Type: 24 / 12-70- Input voltage range: 18-35 V- switching off at low voltage: 14 V- restart under voltage: 18 V- output voltage adjustable by potentiometer: yes- Output voltage: 10-15 V preset 13.2V- Efficiency: 92%- continuous current at output: 70 A- Maximum output current: 85 A- forced ventilation (temperature-controlled): Yes- Standby current: <20 mA- Remote-controlled on / off switch: yes- Weight: 0.9 kg- Dimensions HxWxD: 65 x 88 x 195 mm

Dieser leistungsstarke DC-DC-Wandler ist ideal für raue Umgebungen, da er nach IP67 wasser- und staubdicht ist. Er bietet eine stabile Spannungsumwandlung von 12 V auf 24 V bei einer maximalen Leistung von 1200 W. Technische Daten:- Maße: 200 x 120 x 75 mm- Gewicht: ca. 2 kg- Leistung: 1200 W- Schutzklasse: IP67

Suitable for Bluetooth SmartMonitoring, changing the settings and updating the charger at newStanding software functions can be used with any Bluetooth-enabled smartphone, tablet or othersDevice can be carried out.Fully programmable- Batterieladealgorithm (configurable) or firm output.- Intelligent generator compatibility: engine running.Adaptive 3-stage loading algorithm: constant current-constant voltage-preservation• With lead batteries, it is important that the recording time is kept short in flat discharges toAvoid an overload of the battery. After a deep discharge, theConstant voltage duration automatically extended to ensure that the battery is completelyload.• The recording time is fixed for lithium batteries, 2 hours by default.• Alternatively, a fixed output voltage can be selected.Fern-/shutdownA remote-controlled on/off switch or a relay contact can be found on the two-pin connectorconnect.Alternatively, the connection H (right) of the two-pole plug into a battery plus pole or theConnection l (left) of the two-pin connector to the battery minus pole (or for example to the bodyof a vehicle).All models are short -circuit -resistant and can be switched in parallel to increase the output currentwill.Unlimited many devices can be switched in parallel.Over -temperature protectionWith high ambient temperatures, the output current is reduced.Protection class IP43When the screw terminals are installed on the device.Screw terminalsNo special tools are required for installation.Input protection (not interchangeable)Input voltage area 10-17 VSub -voltage shutdown 7 VSub -voltage restart 7.5 VOutput stern voltage 12.2VSetting range output voltage 10-15 VTolerance Output voltage +/- 0.2 VStore noise 2 MV RMSCont. Starting current atStarting tension and 40 ° C 30 aMaximum output current (10 s)Output stern voltage minus 20% 40 aShort -circuit output current 60 aAccount. Output power at 25 ° C 430 WAccount. Output power at 40 ° C 360 WEffect 87%No load entrance load current <80 MARestroom <1MAOperating temperature range -20 to +55 ° C (reduction in performance by 3% per ° C above 40 ° C)Air humidity max. 95%, not condensingDC connection screw terminalsMaximum cable cross -section 16 mm² (AWG6)Weight 1.8 kgDimensions HXBXT 130 x 186 x 70 mmFigure similar!

DC-DC converter for charging a 12V or 24V battery in vehicles with an intelligent alternator(User braking, Euro 5 and Euro 6 engines)The DC-DC converter Buck-Boost is a DC DC converter for charging a 12V or 24V battery in vehicles with an intelligent alternator.The converter loads the additional battery with a preset charging voltage, whereby high voltages (e.g. Mercedes: 15.4V) or low voltages are eliminated.System for detection when "engine is running"A deep discharge of the vehicle's starter battery is prevented by a built -in system that prevents the "engine running".Instead of this detection system, the converter can also be activated by a programmable input (D+, CANBUS or (+) 15 connection).Fully programmableThe converter can be completely programmed using a simple and user-friendly PC application.(A cable USB Type A plug is required to USB type B plug)A product for 12V, 24V and 12/24V systemsThe converter can be programmed so that it loads a 12V or a 24V additional battery either via a 12V or a 24V AC generator or a starter battery.Charging current and input current limitationThe starting current is determined by the following factors:- the setting of the maximum charging current.- the setting of the maximum input current.- Limiting the maximum operating temperature of the converter.Status ads input (LED)Green: Converter is onYellow: input voltage below the threshold value, converterRed: overtemperature, converter outBlue, flashes quickly: the engine runs, converters switches on after the delayed delayBlue, flashes slowly: undervoltage at the entrance, converter outStatus ads output (LED)Green: converter out, battery voltage normalYellow: converter, battery voltage lowRed: converter out, battery empty or not connectedLila: converterInput voltage range 7-35VThreshold value undervoltage 10VOutput voltage range 2-30VMaximum charging current 12V: 25 A 24 V: 15AElectricity consumption converter, LEDs from (power saving mode) 7 MAAt/from input "to" threshold voltage> 2 V, maximum input voltage 60 VOperating temperature range -25 +80 ° CAmbient temperature max. Strom: up to 40 ° CWeight 1kgDimensions 165 x 120 x 30mm

Dieser kompakte Wandler mit 5 A Ausgangsstrom ist wasserdicht und stoßgeschützt, ideal für den Einsatz in kleinen, rauen Umgebungen. Er bietet eine Leistung von 60 W und ist für Anwendungen mit niedrigerem Strombedarf konzipiert.Technische Daten:- Maße: 100 x 113 x 47 mm- Gewicht: 0,8 kg- Leistung: 60 W

Dieser DC-DC-Wandler bietet eine stabile Umwandlung von 24 V auf 12 V bei einer Ausgangsleistung von 10 A. Der Orion IP67 ist wasserdicht, stoßfest und zündgeschützt, ideal für den Einsatz in anspruchsvollen Umgebungen.Technische Daten:- Maße: 100 x 113 x 47 mm- Gewicht: 0,9 kg- Ausgangsleistung: 120 W

Dieser isolierte DC-DC-Wandler bietet eine stabile Spannungsumwandlung von 24 V auf 12 V mit einer Leistung von 120 W. Er eignet sich für zahlreiche Anwendungen in Off-Grid-Systemen und Fahrzeugen.Technische Daten:- Maße: 130 x 186 x 70 mm- Gewicht: 1,1 kg- Leistung: 120 W

DC-DC converter for charging a 12V or 24V battery in vehicles with an intelligent alternator(User braking, Euro 5 and Euro 6 engines)The DC-DC converter Buck-Boost is a DC DC converter for charging a 12V or 24V battery in vehicles with an intelligent alternator.The converter loads the additional battery with a preset charging voltage, whereby high voltages (e.g. Mercedes: 15.4V) or low voltages are eliminated.System for detection when "engine is running"A deep discharge of the vehicle's starter battery is prevented by a built -in system that prevents the "engine running".Instead of this detection system, the converter can also be activated by a programmable input (D+, CANBUS or (+) 15 connection).Fully programmableThe converter can be completely programmed using a simple and user-friendly PC application.(A cable USB Type A plug is required to USB type B plug)A product for 12V, 24V and 12/24V systemsThe converter can be programmed so that it loads a 12V or a 24V additional battery either via a 12V or a 24V AC generator or a starter battery.Charging current and input current limitationThe starting current is determined by the following factors:- the setting of the maximum charging current.- the setting of the maximum input current.- Limiting the maximum operating temperature of the converter.Status ads input (LED)Green: Converter is onYellow: input voltage below the threshold value, converterRed: overtemperature, converter outBlue, flashes quickly: the engine runs, converters switches on after the delayed delayBlue, flashes slowly: undervoltage at the entrance, converter outStatus ads output (LED)Green: converter out, battery voltage normalYellow: converter, battery voltage lowRed: converter out, battery empty or not connectedLila: converterInput voltage range 7-35VThreshold value undervoltage 10VOutput voltage range 2-30VMaximum charging current 12V: 100A 24V: 50AElectricity consumption converter, LEDs from (power saving mode) 7 MAAt/from input "to" threshold voltage> 2 V, maximum input voltage 60 VOperating temperature range -25 +80 ° CAmbient temperature max. Strom: up to 40 ° CWeight 4.1kgDimensions 288 x 162 x 95mm

The number of electric used on board and electronic devices is steadily increasing. In most cases these are low-voltage applications such as the navigation and radio equipment, mobile phones, hi-fi system etc. These devices are generally designed for 12 V. Victron Energy is supplying DC converter which make the 24 V onboard network a stable 12 V DC voltage available. The products are characterized by high efficiency and safety. An inferior supply can damage your sensitive equipment beyond repair. With Orion voltage transformers this danger is excluded. Beside the 24/12 V converters, other combinations are of course available.Models with an adjustable output can be used as battery charger use. For example, for charging a 24 volt starter or additional battery in an otherwise 12 V system.In addition, all models can be connected in parallel with adjustable output, in order to increase the output current. It can be connected in parallel up to five devices. - Orion DC-DC converters Type: 12 / 24-10- Input voltage range: 9-18 V- switching off at low voltage: 8 V- restart under voltage: 10 V- output voltage adjustable by potentiometer: yes- Output Voltage: 20-30 V preset 26.4 V- Efficiency: 95%- continuous current at the output: 10 A- Maximum output current: 20 A- forced ventilation (temperature-controlled): No- Standby current: <15 mA- Remote-controlled on / off switch possible: No- Weight: 0.4kg- Dimensions HxBxT: 45 x 90 x 125 mm

The number of electrical and electronics devices used on board increases steadily. Most of the time, these are low-voltage applications such as navigation and radio equipment, the mobile phones, the hi-fi system etc. These devices are generally designed for 12 V. Victron Energy provides direct current converter that makes a stable 12 V DC voltage available from the 24 V electrical system. The products are characterized by high levels of efficiency and highest security. An inferior voltage source can irreparably damage your sensitive equipment. This danger is excluded with Orion voltage converter. In addition to the 24/12 V wallers, other combinations are of course also available.-Orion DC Dcwander Type: 12/24-8- Input voltage area: 9-18 V- Switch off when undervoltage: 8 V- Restart under tension: 10 V- Output voltage by potentiometer: No- Output voltage: 24 V- efficiency: 95 %- permanent current at the output: 8 a- Maximum output current: 20 a- blower testing (temperature -regulated): no- Purchase current recording: <10 ma-Remote-controlled on/off switch possible: no- Weight: 0.4 kg- Dimensions HXBXT: 45 x 90 x 115 mm

The number of electric used on board and electronic devices is steadily increasing.In most cases these are low-voltage applications such as the navigation and radio equipment, mobile phones, hi-fi system etc. These devices are generally designed for 12 V.Victron Energy is supplying DC converter which make the 24 V onboard network a stable 12 V DC voltage available.The products are characterized by high efficiency and safety. An inferior supply can damage your sensitive equipment beyond repair.With Orion voltage transformers this danger is excluded. Beside the 24/12 V converters, other combinations are of course available.Models with an adjustable output can be used as battery charger use. For example, for charging a 24 volt starter or additional battery in an otherwise 12 V system.In addition, all models can be connected in parallel with adjustable output, in order to increase the output current. It can be connected in parallel up to five devices.- Orion DC-DC converters Type: 12 / 24-20- Input voltage range: 9-18 V- switching off at low voltage: 8 V- restart under voltage: 10 V- output voltage adjustable by potentiometer: yes- Output Voltage: 20-30 V preset 26.4 V- efficiency: 93%- continuous current at the output: 20 A- Maximum output current: 30 A- forced ventilation (temperature-controlled): yes- Standby current: <30 mA- Remote-controlled on / off switch: yes- Weight: 0.9 kg- Dimensions HxWxD: 65 x 88 x 195 mm

The number of electric used on board and electronic devices is steadily increasing. In most cases these are low-voltage applications such as the navigation and radio equipment, mobile phones, hi-fi system etc. These devices are generally designed for 12 V. Victron Energy is supplying DC converter which make the 24 V onboard network a stable 12 V DC voltage available. The products are characterized by high efficiency and safety. An inferior supply can damage your sensitive equipment beyond repair. With Orion voltage transformers this danger is excluded. Beside the 24/12 V converters, other combinations are of course available. - Orion DC-DC converters Type: 24 / 12-40- Input voltage range: 18-35 V- switching off at low voltage: 14 V- restart under voltage: 18 V- Output voltage adjustable by potentiometer: No- Output voltage: 12 V- Efficiency: 95%- continuous current at output: 40 A- Maximum output current: 55 A- forced ventilation (temperature-controlled): yes- Standby current: <20 mA- Remote-controlled on / off switch: yes- Weight: 0.85 kg- Dimensions HxWxD: 65 x 88 x 185 mm

Der Orion-Tr 24/12-15 DC-DC-Wandler bietet 180 W Ausgangsleistung und ist für Anwendungen konzipiert, die eine stabile Spannungsumwandlung und galvanische Trennung erfordern.Technische Daten:- Maße: 130 x 186 x 70 mm- Gewicht: 1,2 kg- Leistung: 180 W

DC-DC Converters

VICTRON - Orion IP67 24/12-20A (240W)

Der Orion-Tr 24/12-5 ist ein kompakter, isolierter DC-DC-Wandler, der 60 W Leistung bietet. Er eignet sich ideal für den Einsatz in kleinen Installationen, bei denen eine galvanische Trennung erforderlich ist.Technische Daten:- Maße: 130 x 186 x 70 mm- Gewicht: 0,9 kg- Leistung: 60 W