Studer XPC / XPC -S

X-Connect System: The X-Connect System offers a flexible and inexpensive way to install systems with several XTH. The frame is delivered with: assembled DC overcurrent control switch, assembled DC faults, assembled DIN rails. Protection for wiring the auxiliary contacts. Connection tube for AC cabling. Screw connection for the frame. In the event of a power failure, the network inverters switch off even if they have a solar system on their house. Thus, the solar generator then becomes useless. The Solsafe Box is the ultimate solution for this problem. "Background: White" RCC 02 Remote Control: The Xtender has 2 programmable aid contacts. They enable the Xtender to be used together with existing inverters and can switch on a car start generator or trigger an alarm. The Xtender series can be programmed via the RCC 02.Auxiliary relay solar module ARM-01Article No.: 106358Manufacturer: StuderProduct weight: 0.13 kgWeight including packaging: 0.20 kgDimensions: 90 x 79 x 45 mm (L x W x H)

X-Connect System: The X-Connect System offers a flexible and inexpensive way to install systems with several XTH. The frame is delivered with: assembled DC overcurrent control switch, assembled DC faults, assembled DIN rails. Protection for wiring the auxiliary contacts. Connection tube for AC cabling. Screw connection for the frame. In the event of a power failure, the network inverters switch off even if they have a solar system on their house. Thus, the solar generator then becomes useless. The Solsafe Box is the ultimate solution for this problem. "Background: White" RCC 02 Remote Control: The Xtender has 2 programmable aid contacts. They enable the Xtender to be used together with existing inverters and can switch on a car start generator or trigger an alarm. The Xtender series can be programmed via the RCC 02.Top cover IP22 for XPC and CompactArticle No.: 106356Manufacturer: StuderProduct weight: 0.55 kgWeight including packaging: 0.55 kgDimensions: 0 x 0 x 0 mm (L x W x H)

X-Connect System: The X-Connect System offers a flexible and cost-effective way systems with multiple XTH to install. The frame is supplied with: Mounted DC overcurrent circuit breaker, mounted DC fuses, mounted DIN-rails. Protection for wiring of the auxiliary contacts. Connecting tube for AC wiring. Screw for the frame. In the event of a power failure, the power inverters switch off, even if you have solar panels on your house. Thus, the solar generator is then useless. The Solsafe Box is the ultimate solution to this problem. RCC: "BACKGROUND white" 02 Remote Control: The Xtender has two programmable auxiliary contacts. They allow the Xtender is used together with existing inverters and can turn on a generator start auto or trigger an alarm. The Xtender series can be programmed via the RCC 02. Front panel AC in / out for XPC and CompactPart No: 106325Manufacturer: StuderProduct Weight: 0.20 kgWeight incl. Packaging: 0.20 kgDimensions: 0 x 0 x 0 mm (L x B x H)

X-Connect System: The X-Connect System offers a flexible and cost-effective way systems with multiple XTH to install. The frame is supplied with: Mounted DC overcurrent circuit breaker, mounted DC fuses, mounted DIN-rails. Protection for wiring of the auxiliary contacts. Connecting tube for AC wiring. Screw for the frame. In the event of a power failure, the power inverters switch off, even if you have solar panels on your house. Thus, the solar generator is then useless. The Solsafe Box is the ultimate solution to this problem. RCC: "BACKGROUND white" 02 Remote Control: The Xtender has two programmable auxiliary contacts. They allow the Xtender is used together with existing inverters and can turn on a generator start auto or trigger an alarm. The Xtender series can be programmed via the RCC 02. Battery temperature sensor incl. 5m cable for XPC, HPC and C seriesPart No: 106318Manufacturer: StuderProduct Weight: 0.10 kgWeight incl. Packaging: 0.10 kgDimensions: 58 x 51 x 22 mm (L x B x H)

X-Connect System: The X-Connect System offers a flexible and cost-effective way systems with multiple XTH to install. The frame is supplied with: Mounted DC overcurrent circuit breaker, mounted DC fuses, mounted DIN-rails. Protection for wiring of the auxiliary contacts. Connecting tube for AC wiring. Screw for the frame. In the event of a power failure, the power inverters switch off, even if you have solar panels on your house. Thus, the solar generator is then useless. The Solsafe Box is the ultimate solution to this problem. RCC: "BACKGROUND white" 02 Remote Control: The Xtender has two programmable auxiliary contacts. They allow the Xtender is used together with existing inverters and can turn on a generator start auto or trigger an alarm. The Xtender series can be programmed via the RCC 02. LED display, for inverters of the Compact series, incl. 20m cablePart No: 101394Manufacturer: StuderProduct Weight: 0.85 kgWeight incl. Packaging: 1.00 kgDimensions: 114 x 110 x 25 mm (L x B x H)