Antennas

20 in stock

FME coupling for RG58

The FME coupling is crimped onto the antenna cable with the cable inner light and the cable shielding. Plug adapters can then be screwed onto this coupling for different plug -in forms. An FME connector can be used for the opposite side to manufacture a separation point.-Iity connection without soldering through crimp pressures.-Sauver assembly with very low transition resistance-"Cold" soldering connections in cold and wind.-No -corrode corrode the soldering under the influence of the aggressive sea clima.Suitable for coaxial cable RG58.Not suitable for low-loss cable H2005 or Aircell 5!

€3.28* €3.70* (11.35% saved vs. recommended price)

55 in stock

PL connector for RG58 / H2005

Suitable for coaxial cable with 5 mm in outer diameter, e.g. RG58, H2005 or Aircell 5. Cable installation by solder joint.

€4.40* €4.90* (10.2% saved vs. recommended price)

17 in stock

PL connector for H2007 / Aircell 7 cable

Suitable for H2007 LOW LOSS or AIRCELL 7 - cable.

€9.70* €10.90* (11.01% saved vs. recommended price)

Backordered

FME connector for RG58

The FME connector is crimped onto the antenna cable with the cable inner light and the cable shielding.-Iity connection without soldering through crimp pressures.-Sauver assembly with very low transition resistance-"Cold" soldering connections in cold and wind.-No -corrode corrode the soldering under the influence of the aggressive sea clima.Suitable for coaxial cable RG58.Not suitable for low-loss cable H2005 or Aircell 5!

€2.09*

11 in stock

Push on boot for cable RG 174/U

Knickschutztülle schwarz, für Kabel RG 174/U

€0.85* €0.90* (5.56% saved vs. recommended price)

25 in stock

PL connector Crimpio version for RG58 / H2005

Suitable for coaxial cable with 5 mm in outer diameter, e.g. RG58, Aircell H2005 or fifthThe outer conductor is crimped. The inner conductor is to be soldered.

€5.50*

41 in stock

FME coupling for RG174

€3.70*

5 in stock

FME coupling for H2005 / Aircell 5

The FME coupling is crimped with the Kabelinnenlitze and the cable shield of the antenna cable. It can then plug adapters are screwed for different plug standards in this coupling. To produce a separation point a FME connector can be used for the opposite side.-Dauerhafte connection without soldering by crimping pressures.-Clean assembly with very low contact resistance-No "cold" solder joints in the cold and wind.-No corrosion of the solder under the influence of aggressive maritime climate.Especially for low-loss cable H2005 or Aircell 5!

€5.90*

21 in stock

FME connector for RG174

The FME coupling is crimped with the Kabelinnenlitze and the cable shield of the antenna cable.-Dauerhafte connection without soldering by crimping pressures.-Clean assembly with very low contact resistance-No "cold" solder joints in the cold and wind.-No corrosion of the solder under the influence of aggressive maritime climate.

€2.11* €2.40* (12.08% saved vs. recommended price)

35 in stock

FME connector for H2005 / Aircell 5

€3.49* €3.90* (10.51% saved vs. recommended price)

2 in stock

PL double socket PL 258

For the production of a separation point with commercially available PL connectors.- PL connector not included -(Corresponds to Philippi 600060258)

€2.59* €2.90* (10.69% saved vs. recommended price)

26 in stock

Coax connector

Coax connector (for screwing with protective hood), for TV / radio antenna cable.

€1.44* €1.99* (27.64% saved vs. recommended price)

30 in stock

PL connector for RG213

Suitable for coaxial cable with 10 - 11 mm outer diameter.

€4.40* €4.90* (10.2% saved vs. recommended price)

99 in stock

F-connection piece, double socket

To produce a separating point with conventional F-connectors. (F-connector is not included)

€1.95* €2.95* (33.9% saved vs. recommended price)

9 in stock

BANTEN -Gummitülle

For sealing coaxial connectors (PL 259) and antenna connections for Antenna Catalog No .: 7500, 87186, 90,001th Dimensions (Durchm.xL): 25 x 70 mm.

€5.40* €5.90* (8.47% saved vs. recommended price)

4 in stock

PL-angle connection

A sensible article from the communication product group

€3.45* €3.90* (11.54% saved vs. recommended price)

16 in stock

PL connector for coupling FME

FME - plug adapter for screwing on FME Coupling / FME Buchse.Passend for the made-FME antenna cable from our range.

€5.60* €6.50* (13.85% saved vs. recommended price)

2 in stock

Crimping pliers for FME connectors

Crimping tool for coaxial cable RG58, RG59 and RG174.Geeignet for FME connector and FME couplings from our range.-Dauerhafte connection without soldering by crimping pressures.-Clean assembly with very low contact resistance-No "cold" solder joints in the cold and wind.-No corrosion of the solder under the influence of aggressive maritime climate.

€49.40* €56.91* (13.2% saved vs. recommended price)

5 in stock

PL coupling for RG58 / H2005

Suitable for coaxial cable with 5 mm in outer diameter, e.g. RG58, H2005 or Aircell 5. Cable installation by solder joint.

€7.90* €8.90* (11.24% saved vs. recommended price)

23 in stock

Coax plug

TV / radio antenna plug.

€1.44* €1.99* (27.64% saved vs. recommended price)

13 in stock

N plug for RG213

Suitable for coaxial cable with 10 - 11 mm Außendurchmesser.Mittelkontakt for solder joint.

€6.75* €7.50* (10% saved vs. recommended price)

6 in stock

N plug for RG58 / H2005

Suitable for coaxial cable with 5 mm in outer diameter, e.g. RG58, Aircell H2005 or fifth central contact for solder joint.

€8.45* €9.60* (11.98% saved vs. recommended price)

17 in stock

BNC/PL adapter

Plug Adapter with BNC plug to PL female.

€4.50* €5.20* (13.46% saved vs. recommended price)

Backordered

BNC connector crima power for RG58 / H2005

Suitable for coaxial cable with 5 mm in outer diameter, e.g. RG58, Aircell H2005 or fifthCenter contact for crimp or solder connection suitable.

€3.61* €3.90* (7.44% saved vs. recommended price)

Filter products

Antennas