Antennen und Weichen

fastening angleLight AIS antenna with a steel whip stick and low-knob arm.Length: approx. 1,000 mm,Weight: approx. 265 g.Especially compared to the AIS frequencies. Suitable for most AIS recipients and class B AIS transponders.With 22 m antenna cable RG58 and PL connector

Stainless steel angle, suitable for direct intake of the in Art.-No.1926601 (old: 87195),1317301 (old: 7500),1343701 (old: 87192) and1874401 (old: wibal)Antenna included.Delivery takes place with counter mother to fasten the antenna.

(without GPS receiver)For AIS transponderParticularly compact GPS antenna for use with AIS transponders or GPS receivers.The only 8 cm long antenna in the lower part has a 1 '' /14T.p.i. Outside thread.Connection via N-socket, connection cable not included.Quadrifilar helix antenna, supply voltage 3? 6 V DC, power consumption 15 mA.

With this cable you can connect your AIS ClassB send/recipient to your VHF radio radio with integrated splitter (IS).Mottled RG213 cable with 2 PL plugsFor e.g. duplexers, AIS splinters, AIS transpondersLength approx. 1 m

- Material: water resistant fiberglass tube- Color white- connection via cable connector PL 259- Frequency range: 156-162 MHz- deck mounting- Gain 0 dB. Closed DC (i.e., constructive measure to reduce discharges. An integrated into the antenna circuit, the antenna for direct currents represents a short circuit)- Length: approximately 0.25 m- Weight: 0.1 kgMounting flange and PL-plugs are included!

fastening angleLight AIS antenna with a steel whip stick and low-knob arm.Length: approx. 1,000 mm,Weight: approx. 265 g.Especially compared to the AIS frequencies. Suitable for most AIS recipients and class B AIS transponders.With PL connector connection

Save the hassle of installing a costly second antenna and use your existing single antenna with VHF / AIS / FM, by enlisting the lightweight, compact NSPL 500 antenna splitter. When combined with the NAIS 500 AIS system, you can see and be seen on the water, Whether tackling busy shipping lanes or crowded ports.- FM connector for SonicHub ™ 2 or any compatible stereo FM unit.- Weight 260 grams.- Waterproof IPX7 standard.- Low Power Consumption, average power consumption of less than 150 mA at 12 V DC.- Suitable for 12 or 24 V DC system with a wide range of supported input Voltages from 9.6 V to 31.2 V DC.High Performance with Low LossThe NSPL 500's high-performance design means no insertion loss on AIS and VHF receive, and low insertion loss on AIS and VHF transmit.

With this cable you can connect your AIS ClassB transmitter / receiver easyTRX2S with integrated splitter (IS) to your VHF radiotelephone.RG213-assembled cable connectors 2 PLfor e.g. Duplexer AIS splitter AIS-transponderLength about 1.8 m

With this cable you can connect your AIS ClassB send/recipient to your VHF radio radio with integrated splitter (IS).Mottled RG213 cable with 2 PL plugsFor e.g. duplexers, AIS splinters, AIS transpondersLength approx. 1 m

Small magnetic active patch GPS antenna with waterproof housing for assembly on dashboard,Windshield or metallic surfaces. Size: 40 x 50 x 12.5 mm, cable length: 2.5m with FME connector;Contents: cleaning cloth, BNC-FME adapter, metal adhesive pad, mini GPS antenna

The easyTRX2S received Class A and Class B AIS signals and send the data your vessel according to the Class B standards. The devices interpret the incoming data and so have an independent CPA by the plotter alarm. The easyTRX2S have an SD card recorder, with which all data similar to a "black box" can be recorded. let separate harnessesto options such as "Silent Mode" or "PAN PAN" will enable via toggle switch.Common features of all models:- transmitting and receiving devices - Class B (for example, sport boats)- additional USB output- independent of the plotters CPA alarm possible- SD Card Recorder for "BlackBox" use- integrated multiplexer, connecting three devices with different baud rates- Connection for external signal generator for CPA and AIS S.A.R.T. alarm- separate cable for "Silent Mode" or emergency message type "PAN PAN"- NMEA0183 Baud rate: 38400 or 4800 baud selectable via software- Incl. PC software also used to display AIS data on the PC- A total of 8 LEDs for function display- BSH certified (BSH / 46162/4320939/10)- board power supply: 10 V 32 V DC- dimensions (LxWxH): 198 x 158 x 47 mmPorts (depending on model):- FM antenna terminal PL (SO239), 50 Ohm- FM radio PL (SO239), 50 Ohm- Connection GPS antenna, 50 ohms, BNC to TNC adapter- Radio, BNC, 50 Ohm- DVB-T, BNC, 50 Ohm- NMEA2000, Micro-C, MaleeasyTRX2S-ISAIS transmitter / receiver Class B, integrated antenna splitter

V0535 AIS GPS Antenna - 10m cable

A useful article from the group NAVIGATION

GPS antenna for use with the Easytrx and any other class B Aistruponder.Not suitable for use with AIS recipients, since the antenna does not provide NMEA position data.The GPS antenna is delivered with a 5m long cable.The cable can be easily extended up to a total of 15m with an Aircell 7 (or similarly good cable quality - please do not RG58).In addition to the GPS antenna, an AIS (VHF) antenna is also required for the operation of the AIS transponder.-Gps antenne: 5V DC-Connection: BNC connector-The delivery takes place with a plastic flange punch

A useful article from the group NAVIGATION

Die aktive GPS-Antenne von Victron sorgt für eine präzise Positionsbestimmung und ist kompatibel mit verschiedenen Victron-Kommunikationssystemen. Sie bietet eine hohe Empfangsleistung und ist für Anwendungen in Fahrzeugen und maritimen Umgebungen konzipiert.Technische Daten:GPS-Frequenz: 1575.42 MHzKabel: 5 m Länge.