NASA Clipper Serie

9 in stock

NASA - Clipper - Wind measuring system - wireless, complete

The new NASA CLIPPER anemometer works without any cables in the mast. The mounted below deck receiver unit is via a cable connection, the wind speed and direction to the CLIPPER display or any other NMEA0183-compatible display such. as yourPlotter from.The receiver is supplied via the 12 V vehicle electrical system with voltage, the mast assembly needs only intermittently to recharge the battery of the transmitter on the integrated solar cell to bright daylight. With a fully charged battery operation of 2,000 hours is possible without recharging.- In keeping with the popular CLIPPER navigation equipment series- Easy installation - no cable required in mast- orientation of the advance direction via receiver unit- Large digital display, especially easy to read- Full 360 degree indicating the wind direction by 60 segments- Adjustable red backlighting- Dimensions, display device (W x H): 110 x 110 mm- Easy installation, mounting template is- PVC cap included- Suitable for Cockpiontage or exterior helm- NMEA0183 data output, 4800 baud, record MWV- supply (display and receiver) 12 V DC, approximately 67 mA + 25 mA for illumination- battery life (transmitter):> 2000 hours- Battery charging time (transmitter): <150 hours at broad daylight

€484.90* €522.00* (7.11% saved vs. recommended price)

4 in stock

NASA - replacement wind flag for windmaker V2.0 / wireless

Replacement wind flag, usable for all NASA Marine Marine Windmesser of the new generation (V2.0).Suitable for:Clipper Wireless Wind (wireless donor)Clipper Tactical WindClipper Wind V2.0Target Wind V2.0Cruiser Wind V2.0.

€30.90* €34.20* (9.65% saved vs. recommended price)

3 in stock

NASA - Clipper - Ride measuring system - Logge

Clipper-High-quality Navigation device series from NASA- Large digital display, up to 40 mm high digits, easy to read- Connection option for a second ad except for NCZ and NC89- simple and unproblematic operation- Suitable for robust seaside operation- Easy installation, assembly blocks are included- Dimensions (BXH): 110 x 110 mm- Back lighting, controllable- PVC protective cap included- Power supply 12 V- Suitable for cockpion days or outdoor driving.Clipper driving system- Measurement area 0 to 30 nodes- Resolution 0.1 nodes- Speed in knots or land meals- Daily miles and total parts meters- Trend indicator (rising, consistent, falling)- adjustment of the display over the keyboard- Closure cap for installation sleeve included- Giver with 6.5 m of cable in the scope of delivery- Very low power consumption, approx. 20 MA + 25 mA for lighting- Paddel cyclists can be removed for cleaning purposes- NMEA output, NMEA0183, data record: VLW, VHW

€202.30* €213.00* (5.02% saved vs. recommended price)

3 in stock

NASA - CLIPPER - Compass

Clipper-High-quality Navigation device series from NASA- Large digital display, up to 40 mm high digits, easy to read- Connection option for a second ad except for NCZ and NC89- simple and unproblematic operation- Suitable for robust seaside operation- Easy installation, assembly blocks are included- Dimensions (BXH): 110 x 110 mm- Back lighting, controllable- PVC protective cap included- Power supply 12 V- Suitable for cockpion days or outdoor driving.Clipper-Fluxgate-compass- fully cardanously suspended sensor- Fluxgate accuracy +/- 1 degree- Advertising resolution 1 degree- Magnetic misfortune adjustable- Tax indicator by means of a bar display- adjustable spa salar- adjustable electronic damping- Very low power consumption, approx. 120 MA + 25 mA for lighting- NMEA output, NMEA0183, data record: HDG-Small and waterproof NMEA fluxgate sensor with 10 m cable in the scope of delivery.

€271.90* €293.00* (7.2% saved vs. recommended price)

2 in stock

NASA - CLIPPER - Compass - Repeater / Remote display

Clipper-High-quality Navigation device series from NASA- Large digital display, up to 40 mm high digits, easy to read- Connection option for a second ad except for NCZ and NC89- simple and unproblematic operation- Suitable for robust seaside operation- Easy installation, assembly blocks are included- Dimensions (BXH): 110 x 110 mm- Back lighting, controllable- PVC protective cap included- Power supply 12 V- Suitable for cockpion days or outdoor driving.Daughter / second display / repeater for clipper seriesDaughter devices are available in the same design and the same dimensions for the clipper devices Echlot, Log, compass and wind measuring system.Clipper compass daughter, with NMEA0183 - EntranceNotes: This is "only" a subsidiary / second ad / repeater!No (!) Complete compass device is sold here!

€147.90* €159.00* (6.98% saved vs. recommended price)

1 in stock

NASA - EML -2 & Clipper Log Display - Electromagnetic Log

Airspeed indicator system without a paddlewheel and no moving parts! The electromagnetic speed transducer EML-2 does not require a paddle wheel, which could be blocked by floating debris, vegetation or shells.The transducer generates an alternating magnetic field under the boat, and measuring the resulting electric field which is generated by the boat moves through the water.With an excellent linearity interface included converts the sensor signal to boat speed, trip- and total distance.About the CLIPPER EML log display device comes with a large and significant SOG display.- display of speed (with GPS over ground), daily and total miles.- Large digital display, up to 40 mm high, easy to read- backlight in 20 steps dimmable- Speed

€289.90* €312.00* (7.08% saved vs. recommended price)

1 in stock

NASA - Clipper True Wind Display V2.0 - Display

The CLIPPER TRUE WIND display shows the apparent wind speed and direction from an optional NMEA0183 wind sensor (for example, NASA V2.0 or wireless transmitter). If the NMEA input of the display a log or GPS connected can also be shown the true wind speed and direction (true wind).Technical data CLIPPER TRUE WIND display:- Power supply 12 V DC- Current consumption 10 mA + max. 10 mA for display lighting- Data format NMEA0183, 4800 Baud- Data Input 1: Record MWV by the Wind Transmitter- Data Input 2: Input speed, NMEA sentences RMC (by GPS) or VHW (the log)- In keeping with the popular CLIPPER navigation equipment series- Large digital display, especially easy to read- Full 360 degree indicating the wind direction by 60 segments- wind speed display 0-99 node- Adjustable red backlighting- Dimensions, display device (W x H): 110 x 110 mmfor NMEA0183 transmitter (V2.0 or wireless),Display true wind when connected to solder or GPS

€133.90* €144.00* (7.01% saved vs. recommended price)

1 in stock

NASA - Clipper - Wind - Advice device V2.0 / Repeater

CLIPPER - High quality navigation equipment series of NASA- Large digital display, up to 40 mm high, easy to read- Simple and uncomplicated operation- Suitable for robust sea operation- Easy installation, mounting template is- Dimensions (W x H): 110 x 110 mm- backlight, adjustable- PVC cap included- Power supply 12 V- Suitable for Cockpiontage or exterior helmClipper Wind display for all CLIPPER wind measuring systems V2.0 or wireless anemometer.Also be used as a Repeater / Repeater for all CLIPPER wind measuring systems with NMEA0183 output(V1.0, V2.0 and wireless anemometer)Not suitable for direct connection to NASA Wind Transmitter V1.0!

€111.90* €120.00* (6.75% saved vs. recommended price)

1 in stock

NASA - Clipper - EchOLOT only display as a spare part

Attention, this article is only the display as a spare part.

€173.90* €186.80* (6.91% saved vs. recommended price)

1 in stock

NASA - CLIPPER - sounder - Repeater / Remote display

€111.90* €120.00* (6.75% saved vs. recommended price)

1 in stock

NASA - CLIPPER - Hauled - Repeater / Remote display

CLIPPER - High quality navigation equipment series of NASA- Large digital display, up to 40 mm high, easy to read- Simple and uncomplicated operation- Suitable for robust sea operation- Easy installation, mounting template is- Dimensions (W x H): 110 x 110 mm- backlight, adjustable- PVC cap included- Power supply 12 V- Suitable for Cockpiontage or exterior helmClipper wind Motion, with NMEA0183 - input, suitable for all CLIPPER wind measuring systems with output NMEA0183(V1.0, V2.0 and wireless anemometer)

€111.90* €120.00* (6.75% saved vs. recommended price)

will be ordered for you

NASA - Clipper - Duet only instrument as a spare part

Attention, this article is just about the display as a spare part.

€199.90* €215.40* (7.2% saved vs. recommended price)

will be ordered for you

NASA - Ersatzlöffelrad for Wind Transmitter V2.0 / wireless

Ersatzlöffelrad, suitable for all NASA MARINE wind transmitter of the new generation (V2.0).Suitable for:CLIPPER WIND WIRELESS (wireless transmitter)CLIPPER WIND TACTICALCLIPPER WIND V2.0TARGET WIND V2.0CRUISER WIND V2.0.

€31.90* €34.40* (7.27% saved vs. recommended price)

will be ordered for you

NASA - CLIPPER - anemometer V2.0

Complete system consisting of display, NMEA0183 donor and connecting cableThe newly constructed winder with NMEA0183 Output offers a particularly direct reaction to changes in the wind incurrance thanks to its update rate of 10Hz. With ten updates per second, it shows, even with fast maneuvers, any change in the wind speed and direction. The contained clipper wind display shows the apparent wind direction and speed. The mast unit is delivered entirely with a assembly kit and a 20m long connection cable. The data output in the NMEA0183 format can be connected with any compatible display device that can reproduce the "MWV" data record issued.Clipper-High-quality Navigation device series from NASA- Large digital display, up to 40 mm high digits, easy to read- Connection option for a second ad except for NCZ and NC89- simple and unproblematic operation- Suitable for robust seaside operation- Easy installation, assembly blocks are included- Dimensions (BXH): 110 x 110 mm- Back lighting, controllable- PVC protective cap included- Power supply 12 V- Suitable for cockpit assembly or outdoor driving levelClipper wind measurement system V2.0- Wind speed in knots, miles or meters/second- the second display or wind magnifier connected- Giver with 20 m of cable in the scope of delivery- Very low power consumption, approx. 20 MA + 10 MA for lighting- Full 360 degree display of the wind direction using a wind direction pointer with 60 segments- NMEA output, NMEA0183, data record: MWV- Wind mast unit with water-protected plug connection!

€306.90* €330.00* (7% saved vs. recommended price)

will be ordered for you

NASA - Clipper - Duet - Echlot/Logge

CLIPPER - High quality navigation equipment series of NASA- Large digital display, up to 40 mm high, easy to read- Connection option for a second display except for NCZ and NC89- Simple and uncomplicated operation- Suitable for robust sea operation- Easy installation, mounting template is- Dimensions (W x H): 110 x 110 mm- backlight, adjustable- PVC cap included- Power supply 12 V- Suitable for Cockpiontage or exterior helmCLIPPER DUET- Combined instrument for depth and speed- Both donors, each with 6.5 m cable included- Very low power consumption, about 50 mA + 25 mA for illumination functions sounder:- Measuring the range of 0.8 up to 100 m- Programmable Gain- 150 kHz oscillator- Adjustable acoustic shallow water alarm- two measurement methods: depth beneath the keel or depth below the transducer (many already mounted sensors can be used, for example SEAFARER.)Features Log:- Range 0 to 30 knots- Resolution 0.1 nodes- speed in knots or statute miles - Tagesmeilen- and GESAM ropes counter- Adjust the display using the keyboard - closing cap for mounting sleeve included- paddlewheel can be removed for cleaning purposes

€270.13* €284.00* (4.88% saved vs. recommended price)

will be ordered for you

NASA - CLIPPER - Wind - Indicator V1.0

€176.90* €190.40* (7.09% saved vs. recommended price)

will be ordered for you

NASA - Clipper Tactical Wind Measure Tanks

The NASA Clipper Tactical wind measurement system enables the display of the true wind at the log or GPS connected via NMEA0183.The newly constructed winder with NMEA0183 Output offers a particularly direct reaction to changes in the wind incurrance thanks to its update rate of 10Hz.Where a high performance is required under demanding conditions, the Clipper Tactical wind measuring system is the right choice. With ten updates per second, it shows, even with fast maneuvers, any change in the wind speed and direction. The Clipper True Wind display contained shows the apparent wind direction and speed. If a log or GPS is connected to the NMEA input of the display, the true wind speed and direction (true wind) can also be shown.The mast unit is delivered entirely with a assembly kit and a 20m long connection cable. The data output in the NMEA0183 format can be connected to any compatible display device that can reproduce the "MWV" data record output.Technical data Clipper True Wind Display:- Voltage supply 12 V DC- Electricity consumption 10 MA + max. 10 MA for display lighting- Data format NMEA0183, 4800 Baud- Data input 1: Data record MWV from the windbook- Data input 2: Speed input, NMEA data records RMC (from GPS) or VHW (from the log)-Suitable for the popular Clipper navigation device series- Large digital display, particularly easy to read- Full 360 degree display of the wind direction with 60 segments- Display of the wind speed of 0 - 99 nodes- Regular red background lighting- Dimensions, display device (BXH): 110 x 110 mmTechnical data Clipper True Wind Geber:- Voltage supply 12 V DC- Electricity intake 9 MA- Data output: data format NMEA0183, 4800 Baud, data record MWV- Connection cable, length 20 m

€340.90* €367.00* (7.11% saved vs. recommended price)

will be ordered for you

NASA - Unterlegscheiben-Set für Windmessgeber V1.0, V2.0 & k

3 x Unterlegscheiben, 1 Klemmring (starlock grip fastener), 1 selbstsichernde Mutter, verwendbar für alle NÁSA-Windmessgeber(V1.0, V2.0 und kabellosen Geber)

€4.10* €4.40* (6.82% saved vs. recommended price)

will be ordered for you

NASA - CLIPPER - EASYLOG - NMEA0183 Speed

Drive system without measuring paddle wheel and without moving parts. No through hull required !!!Simply connect the data input of CLIPPER EASYLOG with NMEA0183 output of your GPS receiver or plotter and receive a large and significant SOG display.- display of speed (with GPS over ground), daily and total miles.- connects to any GPS device or plotter with NMEA 0183 output.- Can also be used as a second display for an existing log with NMEA output.- Large digital display, up to 40 mm high, easy to read- Easy installation, mounting template is- Dimensions (W x H): 110 x 110 mm- PVC cap included- Suitable for cockpit assembly or external helmTechnical specifications- display with 0.1 nodes / 0.1 NM resolution- Total mileage counter up to 9999 NM- Opto-isolated NMEA input- NMEA 0183 sentences: RMC (from GPS), VHW, VLW (the log)- backlight in 20 steps dimmable- Power consumption 1.5 mA at 12 V (10 mA with backlight)- Speed

€111.90* €120.00* (6.75% saved vs. recommended price)

will be ordered for you

NASA - CLIPPER - GPS Repeater / Remote display

CLIPPER - High quality navigation equipment series of NASA Large digital display, up to 40 mm high digits, well Readability connectivity for a second display except for NCZ and NC89- Simple and uncomplicated operation- Suitable for cockpit assembly or external helm- Easy installation, mounting template is- dimensions (W x H): 110 x 110 mm backlight, adjustable- PVC cap included- Power supply 12 VRepeater / Remote display / repeater for CLIPPER seriesCLIPPER GPS auxiliary display- Can be connected to almost any GPS receiver with NMEA format (NMEA0183, V.2) The GPS auxiliary display requires the NMEA sentences RMB and RMC for display. Many GPS receivers of record RMB is issued only when the drive was activated at a waypoint. With these devices all display features are available only with active waypoint!- Display of ground speed, compass heading, position- Display of distance and course to the waypoint and course deviation- Graphical representation of the course (highway display), good tax help- Very low power consumption, about 3 mA + 25 mA for illumination

€161.90* €174.00* (6.95% saved vs. recommended price)

will be ordered for you

NASA - EML-3 CLIPPER DUET - Electromagnetic Log

€415.90* €439.90* (5.46% saved vs. recommended price)

will be ordered for you

NASA - CLIPPER - sounder

Clipper-High-quality Navigation device series from NASA- Large digital display, up to 40 mm high digits, easy to read- Connection option for a second ad except for NCZ and NC89- simple and unproblematic operation- Suitable for robust seaside operation- Easy installation, assembly blocks are included- Dimensions (BXH): 110 x 110 mm- Back lighting, controllable- PVC protective cap included- Power supply 12 V- Suitable for cockpion days or outdoor driving.Clipper- Measuring range 0.8 to 100 m- Programmable reinforcement- Adjustable acoustic deep and shallow alarm- Trend indicator (rising, consistent, falling)- Three measuring methods: depth under the keel, depth under the encoder or depth from the water surface- Giver with 6.5 m of cable in the scope of delivery- Very low power consumption, approx. 20 MA + 25 mA for lighting- 150 KHz swingers (many donors already assembled can continue to be used, e.g. Seafarer)

€202.30* €213.00* (5.02% saved vs. recommended price)

Filter products

NASA Clipper Serie