LED Bulbs

Birne, 640 lm, 7 W, 12/24 VDC, warm weiß, E27, IP50

Consisting of 1x jack G13, 1x silicone cover, 2x mounting clipPart No: 500026Manufacturer: PhaesunProduct Weight: 0.00 kgWeight incl. Packaging: 0.00 kgDimensions: 0 x 0 x 0 mm (L x B x H)Shipping: Any Consisting of 1x jack G13, 1x silicone cover, 2x mounting clipPart No: 500026Manufacturer: PhaesunProduct Weight: 0.00 kgWeight incl. Packaging: 0.00 kgDimensions: 0 x 0 x 0 mm (L x B x H)Shipping: Any

These lamps are characterized by a high luminous flux, long life and high reliability for indoor applications from. Due to their high quality and unique overtemperature protection Phaesun Sun Flower bulbs can also withstand extreme environmental conditions. Your high-frequency LED driver technology without electrolytic capacitors ensures excellent light output, long life and high reliability. The unique heat dissipating design with no fins or cracks prevents the entry of insects or dust that can block heat radiation, thus increasing additional performance and reliability of the lamp.Product features: reflector, 12VDC, cold light, E27, IP50, weight: 0.12 kg, Reflector 300 lm, 3 W, 12 VDC, cool white, E27, IP50Part No: 360147Manufacturer: PhaesunProduct Weight: 0.12 kgWeight incl. Packaging: 0.15 kgDimensions: 122 x 122 x 61 mm (L x B x H)

These lamps are characterized by a high luminous flux, long lifespan and high reliability for indoor applications. Due to their high -quality and unique over -temperature protection, Phaesun Sun Flower lamps also resist extreme environmental conditions. Your high -frequency LED driver technology without electrolyte capacitors ensures excellent light output, long service life and high reliability. The unique heat -dissipating design without slats or cracks prevents the penetration of insects or dust that can block the heat radiation and thus also increase the power and reliability of the lamp.Product features: reflector, 12VDC, Kallicht, E27, IP50, weight: 0.12 kg,Reflector, 200 lm, 2 W, 12 VDC, cold white, E27, IP50Article No.: 360146Manufacturer: PhaesunProduct weight: 0.12 kgWeight including packaging: 0.15 kgDimensions: 122 x 122 x 60 mm (L x W x H)

High -efficient LED lamp in the design of an ordinary MR11 spot for networked applications, e.g. huts, tent, motorhome etc. Due to its very low energy consumption, it can be operated for 16 hours with a 5W solar module and a small 4Ah battery. In this way, the total cost of the system can be reduced to a minimum. The light output is comparable to a 12W halogen spot with a long lifespan of more than 40,000 hours. In addition, the lamp is now available as a G4 without housing, especially for use in motorhomes and caravans.Product features: 1 x high-performance LED, 12 VDC, 1.2 W, 100 lm neutral white, 4500,1 x high -performance LED Cree, 100lm, 12VDC, Daylight White, 4500K, G4Article No.: 360094Manufacturer: PhaesunProduct weight: 0.01 kgWeight including packaging: 0.01 kgDimensions: 20 x 20 x 0 mm (L x W x H)

The PN- OP 300 G5.3 is a highly efficient LED lamp with 3x1.25W LEDs and a light output of 300 lm with standard G5.3 base. Due to the very low energy consumption, it can be operated with a 4W solar panel and a small battery of 10 AH over 8 hours. The lifespan is more than 50,000 hours.Product characteristics: specially designed for street lights and applications in difficult environmental conditions. , Robustly completely protected housing (IP67), buck/boost converter for various string tensions for all industrial standard LED blocks, external temperature sensor and soft start for longer LED lifespan, linear or PWM LED dimming output, small size suitable for most applications,3 x 1.2W LED, 12 - 24VDC, 75lm/wattsArticle No.: 360082Manufacturer: PhaesunProduct weight: 0.04 kgWeight including packaging: 0.04 kgDimensions: 49 x 50 x 0 mm (L x W x H)

PN-OP PL LED Panels Phaesun PN - OP PL LED are compact LED lights for 24 V DC applications. The stable PMMA casing is unbreakable so that the lamp can be used in almost any environment. Because of their long life, it offers an optimal solution for use in remote regions.Features :: Highest efficiency in class through direct download technology, low weight, design ultra flat, Very long lifetime, installation Simple, Maintenance-free, best reliability through approved components and best in class LEDs, Made in Germany, 24VDC, 12W, 500mA, 1200lm, 100lm / W, daylight white, 4500KPart No: 360057Manufacturer: PhaesunProduct Weight: 0.10 kgWeight incl. Packaging: 0.10 kgDimensions: 155 x 155 x 6 mm (L x B x H)

Energy -saving Power LED lamp Ø 30mm with G4 pen base for installation spotlights with side G4 pen base. The low heat development enables usealso in heat -sensitive areas.Constant brightness for different supply voltages 9-28 V DC, 1.6W, light color warm white approx. 3000 ° K

NO BSH approval, export only!60SMD LEDØ 31mm x H69mm with base,Bayonet BAY15dred

No BSH approval, only export!60smd LEDØ 31mm x H69mm with base,Bajonettsockel Bay15dgreen

NO BSH approval, export only!15SMD LEDØ 26mm x H52mm with base,Bayonet BAY15dred

No BSH approval, only export!15SMD LEDØ 26mm x H52mm with base,Bajonettsockel Bay15dgreen

Marine LED- Very low energy requirement- Pleasant warm and white light color- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control '' burns' 'burn' and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.1 lamp with 9 SMD LED (6x red, 10x warm white). Ideal for reading card at naval applications.The light color is switched through repeated switching on and off in a direct result.Series: 16 SMD moduleLight current tax type.: 80 lumen ww / 20 lumens redColor temperature: warm white (approx. 3000 Kelvin) / red 623 nmCRI:> 80 at 3000KRated /nominal life duration: up to 30,000 hLight stream maintenance: 0.7Ray angle: 125 °Base type (standard designation): G4Consumption: 1.4 watts WW / 0.5 watts redInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz EffectiveReplaced: 10 - 15 W halogenic pencil lampDimmable: yes (PWM dimension)Dimensions: 33 mm (+8.5 mm pins)Weight: 4 gWeight in the blister: 16 gSchlag cycles:> 25,000Color consistency: SDCM

The voltage in the electrical system of a yacht is not due to influences from the alternator and battery charger constant.At full charge of the battery voltages of up to 14.8 V, the control, in some systems, the short term higher voltagesreached.The life span of LED lights without integrated voltage stabilization is greatly reduced by such surges. In most cases, the damage isnot directly visible to the user. Only after prolonged operation, a brownish discoloration of the LEDs and a deterioration in luminance can be recognized.This can burn a constant-voltage regulator can be prevented by the installation.- Input voltage: 9.2 to 18 V DC- Output voltage: 10.8 to 13.2 V DC, adjustable- output current: 0 - 1.25 A / rated power 15 watts.- dimensions (LxWxH): 78 x 51 x 28 mm.

MARINE LED range- Very low power consumption- Pleasant warm white light color- The light color corresponds to conventional incandescent lamps- Large input voltage range, suitable for 12 and 24 V systems- Insensitive against voltage spikes (by dynamo, charger, etc.)- "burn out" prevents Integrated voltage regulation and guarantees long service life- The lamps with integrated power control function independently of the polarity- In connection with an electronic dimmer (pulse width modulation), the LED can be dimmed- Due to continuous development we reserve the right without notice in design and specifications to supply different items successor.- Energy efficiency class A +1 Lamp 16 SMD-LED (red 6x, 10x warm white).Ideal for reading maps in marine applications.The switching of the light color is performed by repeatedly turning on and off in direct succession. With lens.Series 16er SMD moduleLuminous flux output typ .: 150 lumens ww / 30 lumens redColor temperature: warm white (3000 Kelvin) / red 623 NmCRI:> 60 at 3000KRated / rated life: up to 50,000 hLumen maintenance: 0.7Angle: 125 °Socket type (standard designation) GU5.3Consumption: 1.8 W ww / 1.5 watts redInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz effectivelySubstitutes: 16 W halogen spot at ww *Dimmable: YesDimensions: 50mm x 45 mm ØWeight: 35 gWeight in blister: 47 gSwitching cycles:> 25,000Color Consistency: SDCM

MARINE LED- Very low power consumption- Pleasant warm white light color- The light color corresponds to conventional incandescent lamps- Large input voltage range, suitable for 12 and 24 V systems- Insensitive against voltage spikes (by dynamo, charger, etc.)- prevents Integrated Voltage Regulation '' burn '' and guarantees long service life- The Leuchittel with integrated power control function independently of the polarity- In connection with an electronic dimmer (pulse width modulation), the LED can be dimmed- Due to continuous development we reserve the right without notice in design and specifications to supply different items successor.1 Lamp 16 SMD-LED (red 6x, 10x warm white). Ideal for reading maps in marine applications.The switching of the light color is performed by repeatedly turning on and off in direct succession.Series: 16er SMD moduleLuminous flux output typ .: 150 lumens ww / 30 lumens redColor temperature: warm white (3000 Kelvin) / red 623 NmCRI:> 80 at 3000KRated / rated life: up to 30,000 hLumen maintenance: 0.7Angle: 125 °Socket type (standard designation): G4Consumption: 1.8 W ww / 1 watt redInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz effectivelyReplaces: 16 W halogen pin lamp at 3000 K *Dimmable: Yes (PWM dimming)Dimensions: 33 mm (+9 mm pins)Weight: 5 gWeight in the Blister: 17 gSwitching cycles:> 25,000Color Consistency: SDCM

Marine LED- Very low energy requirement- Pleasant warm and white light color- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control '' burns' 'burn' and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.Series 1 lamp with 12 SMD pen baseArticle number LED12STG4LEAN code 4260106547199Light current tax type 65 lumensColor temperature warm white (approx. 2700 Kelvin)CRI> 80Rated /nominal life of up to 30,000 hLight current maintenance 0.7Ray angle 300 °Base type (standard designation) G4Consumption 0.6 wattsInput voltage 10-30V DC / 10-18V AC at 50/60 Hz EffectiveReplaces approx. 5-10W halogen pen lamp*Dimmable yesDimensions Ø 9.4mm x 36.5 mmWeight 2 gWeight in the blister 12 gSchlag cycles> 25,000Color consistency SDCM