Studer Xtender XTM

The combined inverters of the Xtender series offer an unusual versatility through its many features. The basic functions of the Xtender are the inverter, battery charger, transfer system and the support of external AC power sources. These functions can be combined and controlled fully automatically. As an exceptional ease of use and very good exploitation of the energy available on offer. Its programmable auxiliary contacts allow the interconnection with existing systems or the implementation of other functions. The Xtender is fully adjustable by remote control. When a software with new functions is available, it can later be transferred into the system, so the Xtender is always up to date. Several devices can be connected in parallel or three phase, to increase the available power. So the series can work together Xtender up to nine inverter.Product features: programmable battery charger with PFC Automatic load detection Standby load detection widely adjustable from a low value switchable, used Pure sine wave voltage Excellent overload capacity Optimal battery protection Adjustable integrated battery charger, multi-stage parallel Highest reliability Can be used as back-up system or uninterruptible power source be (UPS) multifunction contacts, Adjustable power sharing, Reliable and silent with any kind of load, supports AC source (Smart boost) Automatic support for Lastspitzehn (power sharing), Ultra-fast transfer relay high efficiency, control by digital signal processor (DSP) Electronic protection functions: deep discharge battery overvoltage shutdown, over temperature and overload protection, short circuit protection, polarity reversal protection by internal fuse Acoustic alarm at deep discharge or overheating, Pure sine wave voltage 1500 VA, the input 12VDC, output: 230V 50Hz, battery charger 0-70APart No: 303040Manufacturer: StuderProduct Weight: 15.00 kgWeight incl. Packaging: 16.00 kgDimensions: 133 x 322 x 466 mm (L x B x H)

Sine wave inverter-charger combination12V / 230V / 1500VA-70A Type XTM 1500-12S / N @

reine Sinusspannung 3500VA, Eingang: 48VDC, Ausgang: 120V 50/60Hz, Batterieladegerät 0-50A

Sinus inverter charging combination24V/230V/2400VA-55A Type XTM 2400-24# @

Thanks to their many functions, the Xtender series's combination inverters offer unusual versatility. The basic functions of the Xtender are the inverter, the battery loader, the switchover function and the support of external intercourse. These functions can be combined and controlled completely automatically. In this way, exceptional user comfort and very good use of the available energy are offered. Its programmable auxiliary contacts allow the connection with existing systems or the use of further functions. The xtender can be completely adjusted via the remote control. If software is available with new functions, it can be transferred to the system later, so that the Xtender is always up to date. Several devices can be connected parallel or three -phase to increase the available performance. This means that up to nine inverters of the Xtender series can work together.Product features: pure sinus shaft voltage, excellent overload, optimal battery protection, adjustable integrated battery charger, multi-stage battery charger with PFC, automatic load detection, standby load detection Setting, from low value, parallel, highest reliability, can be used as a back-up system or uninterrupted current source are (UPS), multifunctional contacts, adjustable power sharing, reliable and noisy for any type of load, AC sources (smart boost), automatic support for load point (power sharing), ultra -fast transferrelais, highly efficient, control by digital signal processor (DSP) , Electronic protective functions: deep discharge protection, battery overvoltage shutdown, over -temperature and overload protection, short -circuit protection, spotting protection through internal backup, acoustic alarm for deep discharge or overheating,Pure sinus voltage 3000VA, entrance: 24VDC, output: 230V 50Hz, battery charger 0-90aArticle No.: 106002Manufacturer: StuderProduct weight: 21.20 kgWeight including packaging: 24.10 kgDimensions: 133 x 322 x 466 mm (L x W x H)

Sinus inverter charging combination12V/230V/2000VA-100A Type XTM 2000-12S/n @

Thanks to their many functions, the Xtender series's combination inverters offer unusual versatility. The basic functions of the Xtender are the inverter, the battery loader, the switchover function and the support of external intercourse. These functions can be combined and controlled completely automatically. In this way, exceptional user comfort and very good use of the available energy are offered. Its programmable auxiliary contacts allow the connection with existing systems or the use of further functions. The xtender can be completely adjusted via the remote control. If software is available with new functions, it can be transferred to the system later, so that the Xtender is always up to date. Several devices can be connected parallel or three -phase to increase the available performance. This means that up to nine inverters of the Xtender series can work together.Product features: pure sinus shaft voltage, excellent overload, optimal battery protection, adjustable integrated battery charger, multi-stage battery charger with PFC, automatic load detection, standby load detection Setting, from low value, parallel, highest reliability, can be used as a back-up system or uninterrupted current source are (UPS), multifunctional contacts, adjustable power sharing, reliable and noisy for any type of load, AC sources (smart boost), automatic support for load point (power sharing), ultra -fast transferrelais, highly efficient, control by digital signal processor (DSP) , Electronic protective functions: deep discharge protection, battery overvoltage shutdown, over -temperature and overload protection, short -circuit protection, spotting protection through internal backup, acoustic alarm for deep discharge or overheating,Pure sinus voltage 2000VA, entrance: 12VDC, output: 230V 50Hz, battery charger 0-100aArticle No.: 106001Manufacturer: StuderProduct weight: 18.50 kgWeight including packaging: 18.50 kgDimensions: 133 x 322 x 466 mm (L x W x H)

reine Sinusspannung 2000VA, Eingang: 48VDC, Ausgang: 120V 50/60Hz, Batterieladegerät 0-30A

reine Sinusspannung 1500VA, Eingang: 12VDC, Ausgang: 120V 50/60Hz, Batterieladegerät 0-70A

Thanks to their many functions, the Xtender series's combination inverters offer unusual versatility. The basic functions of the Xtender are the inverter, the battery loader, the switchover function and the support of external intercourse. These functions can be combined and controlled completely automatically. In this way, exceptional user comfort and very good use of the available energy are offered. Its programmable auxiliary contacts allow the connection with existing systems or the use of further functions. The xtender can be completely adjusted via the remote control. If software is available with new functions, it can be transferred to the system later, so that the Xtender is always up to date. Several devices can be connected parallel or three -phase to increase the available performance. This means that up to nine inverters of the Xtender series can work together.Product features: pure sinus shaft voltage, excellent overload, optimal battery protection, adjustable integrated battery charger, multi-stage battery charger with PFC, automatic load detection, standby load detection Setting, from low value, parallel, highest reliability, can be used as a back-up system or uninterrupted current source are (UPS), multifunctional contacts, adjustable power sharing, reliable and noisy for any type of load, AC sources (smart boost), automatic support for load point (power sharing), ultra -fast transferrelais, highly efficient, control by digital signal processor (DSP) , Electronic protective functions: deep discharge protection, battery overvoltage shutdown, over -temperature and overload protection, short -circuit protection, spotting protection through internal backup, acoustic alarm for deep discharge or overheating,Pure sinus voltage 2000VA, input: 48VDC, output: 240V 50Hz, battery charger 0-30ar a sine voltage 2000VA, input: 48VDC, output: 240V 50Hz, battery charger 0-30AArticle No.: 303045Manufacturer: StuderProduct weight: 16.20 kgWeight including packaging: 17.50 kgDimensions: 133 x 322 x 466 mm (L x W x H)

Sine wave inverter-charger combination24V / 230V / 3500VA-90A Type XTM 3500-24# @

reine Sinusspannung 2000VA, Eingang: 12VDC, Ausgang: 120V 50/60Hz, Batterieladegerät 0-100A

Additional module for remote control on / from the combination inverter of the XTM / XTH series. This can reduce the self -consumption of the XTM / Xthunter 1 ma. Including Connection cable 3 m. Dimensions B 45 x H 73 x D 45 mm

The combined inverters of the Xtender series offer an unusual versatility through its many features. The basic functions of the Xtender are the inverter, battery charger, transfer system and the support of external AC power sources. These functions can be combined and controlled fully automatically. As an exceptional ease of use and very good exploitation of the energy available on offer. Its programmable auxiliary contacts allow the interconnection with existing systems or the implementation of other functions. The Xtender is fully adjustable by remote control. When a software with new functions is available, it can later be transferred into the system, so the Xtender is always up to date. Several devices can be connected in parallel or three phase, to increase the available power. So the series can work together Xtender up to nine inverter.Product features: programmable battery charger with PFC Automatic load detection Standby load detection widely adjustable from a low value switchable, used Pure sine wave voltage Excellent overload capacity Optimal battery protection Adjustable integrated battery charger, multi-stage parallel Highest reliability Can be used as back-up system or uninterruptible power source be (UPS) multifunction contacts, Adjustable power sharing, Reliable and silent with any kind of load, supports AC source (Smart boost) Automatic support for Lastspitzehn (power sharing), Ultra-fast transfer relay high efficiency, control by digital signal processor (DSP) Electronic protection functions: deep discharge battery overvoltage shutdown, over temperature and overload protection, short circuit protection, polarity reversal protection by internal fuse Acoustic alarm at deep discharge or overheating, Pure sine wave voltage 2000 VA, input: 24VDC, output: 230V 50Hz, battery charger 0-55APart No: 303043Manufacturer: StuderProduct weight: 16:20 kgWeight incl. Packaging: 21.00 kgDimensions: 133 x 322 x 466 mm (L x B x H)

Thanks to their many functions, the Xtender series's combination inverters offer unusual versatility. The basic functions of the Xtender are the inverter, the battery loader, the switchover function and the support of external intercourse. These functions can be combined and controlled completely automatically. In this way, exceptional user comfort and very good use of the available energy are offered. Its programmable auxiliary contacts allow the connection with existing systems or the use of further functions. The xtender can be completely adjusted via the remote control. If software is available with new functions, it can be transferred to the system later, so that the Xtender is always up to date. Several devices can be connected parallel or three -phase to increase the available performance. This means that up to nine inverters of the Xtender series can work together.Product features: pure sinus shaft voltage, excellent overload, optimal battery protection, adjustable integrated battery charger, multi-stage battery charger with PFC, automatic load detection, standby load detection Setting, from low value, parallel, highest reliability, can be used as a back-up system or uninterrupted current source are (UPS), multifunctional contacts, adjustable power sharing, reliable and noisy for any type of load, AC sources (smart boost), automatic support for load point (power sharing), ultra -fast transferrelais, highly efficient, control by digital signal processor (DSP) , Electronic protective functions: deep discharge protection, battery overvoltage shutdown, over -temperature and overload protection, short -circuit protection, spotting protection through internal backup, acoustic alarm for deep discharge or overheating,Pure sinus voltage 3500VA, entrance: 48VDC, output: 230V 50Hz, battery charger 0-50aArticle No.: 106003Manufacturer: StuderProduct weight: 22.90 kgWeight including packaging: 25.35 kgDimensions: 133 x 322 x 466 mm (L x W x H)