Steca - PWM controllers & accessories

USB cable for PC, ´Al. FTDI chip, 1.8m, veiling offfen, for Tarom 4545 and 4545-48, TTL 0-3.3VArticle No.: 390824Manufacturer: StecaProduct weight: 0.30 kgWeight including packaging: 0.30 kgDimensions: 0 x 0 x 0 mm (L x W x H)USB cable for PC, ´Al. FTDI chip, 1.8m, veiling offfen, for Tarom 4545 and 4545-48, TTL 0-3.3VArticle No.: 390824Manufacturer: StecaProduct weight: 0.30 kgWeight including packaging: 0.30 kgDimensions: 0 x 0 x 0 mm (L x W x H)

DCL Voltage Converter The DCL extends the functions on of the DCS by adding excess energy management functions on did Provides usable energy did would normally be wasted Because The battery can not accept the extra solar energy. With DCL it is possible to charge a second battery with excess energy. This is Widely used in mobile homes and boats Which oft have a battery for the solar system and a second battery for starting the engine. Another typical application is to power a small fan for air exchange on a boat powered only with excess energy. Only your imagination limits the number of possible applications. CXM Remote Display Phocos CXM can be used in combination with Phocos CXN series charge controllers via interface connector. Phocos CXM remote display is designed to display panel current, load current and battery voltage of your PV system as true values

USB cable for PC, incl. FTDI chip, 1.8m, RJ45 connector, for Power Tarom, TTL 0-5VPart No: 390334Manufacturer: StecaProduct Weight: 0.30 kgWeight incl. Packaging: 0.30 kgDimensions: 1800 x 0 x 0 mm (L x B x H) USB cable for PC, incl. FTDI chip, 1.8m, RJ45 connector, for Power Tarom, TTL 0-5VPart No: 390334Manufacturer: StecaProduct Weight: 0.30 kgWeight incl. Packaging: 0.30 kgDimensions: 1800 x 0 x 0 mm (L x B x H)

This solar charge controller is a further development of the controller family Solarix PR. Thanks to the increased module and load current, they are suitable for even larger systems. In addition, the devices feature an integrated USB charging socket, which can be loaded on smartphones and tablets.Product features :: Reliable charging controller for PV off-grid systems, graphical LCD display, programmable, USB charging socket, 40A module, 40A load, 12 / 24VDC, LCD, IP32, screw terminal, programmable, USB 5V / 1.5APart No: 321321Manufacturer: PhaesunProduct Weight: 0.35 kgWeight incl. Packaging: 0.35 kgDimensions: 187 x 96 x 44 mm (L x B x H)

This solar charge controller is a further development of the controller family Solarix PR. Thanks to the increased module and load current, they are suitable for even larger systems. In addition, the devices feature an integrated USB charging socket, which can be loaded on smartphones and tablets.Product features :: Reliable charging controller for PV off-grid systems, graphical LCD display, programmable, USB charging socket, 25A module 25A load, 12 / 24VDC, LCD, IP32, screw terminal, programmable, USB 5V / 1.5APart No: 321320Manufacturer: PhaesunProduct Weight: 0.35 kgWeight incl. Packaging: 0.35 kgDimensions: 187 x 96 x 44 mm (L x B x H)

The solar charge controller Steca Solsum 2525 and 4040 are a further development of the controller family Solarix PRS. Thanks to the increased module and load current, they are suitable for even larger systems. In addition, the devices feature an integrated USB charging socket, which can be loaded on smartphones and tablets.Product features :: Reliable charge controller for off-grid PV systems, LEDs as a system display, programmable, USB charging socket, 40A module, 40A load, 12 / 24VDC, LED, | IP32, screw terminal, programmable with RC 100, 5V USB / 1.5APart No: 321319Manufacturer: PhaesunProduct Weight: 0.34 kgWeight incl. Packaging: 0.34 kgDimensions: 187 x 96 x 45 mm (L x B x H)

The solar loaders Steca Solsum 2525 and 4040 are a further development of the Solarix PRS regulator family. Thanks to the increased module and load current, they are suitable for even larger systems. In addition, the devices have an integrated USB charging socket on which smartphones and tablets can be loaded.Product features :: Reliable charge controller for PV Off-Grid systems, LEDs as a system display, programmable, USB charging socket,25a module, 25a load, 12/24vdc, LED, IP32, screw clamp, programmable with RC 100, 5V USB/ 1.5AArticle No.: 321318Manufacturer: PhaesunProduct weight: 0.34 kgWeight including packaging: 0.34 kgDimensions: 187 x 96 x 45 mm (L x W x H)

Remote Control for Steca Solarix PRS Solar Charge Controller.Remote control for the configuration of Steca Solarix PRS, Steca Solsum, Steca Solarix MpptArticle No.: 106798Manufacturer: StecaProduct weight: 0.09 kgWeight including packaging: 0.15 kgDimensions: 115 x 57 x 20 mm (L x W x H)

DCL Voltage Converter The DCL extends the functions on of the DCS by adding excess energy management functions on did Provides usable energy did would normally be wasted Because The battery can not accept the extra solar energy. With DCL it is possible to charge a second battery with excess energy. This is Widely used in mobile homes and boats Which oft have a battery for the solar system and a second battery for starting the engine. Another typical application is to power a small fan for air exchange on a boat powered only with excess energy. Only your imagination limits the number of possible applications. CXM Remote Display Phocos CXM can be used in combination with Phocos CXN series charge controllers via interface connector. Phocos CXM remote display is designed to display panel current, load current and battery voltage of your PV system as true values

The Steca PR 10-30 charge controller series is the highlight of the solar charge controllers. The latest charging technologies, combined with a much improved Steca-AtonIC charge state determination result in an optimum battery maintenance and control of up to 900 Wp module power that can be connected. A large display informs the user with the help of icons all operating conditions. The state of charge is represented visually in the form of a fuel gauge. Data such. As voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter, the user can reset itself.Functions: Hybrid controller, state of charge calculating PWM shunt (SOC), Automatic detection of voltage, PWM control Multistage charging technology, SOC-dependent load disconnection, Automatic load reconnection, temperature compensation, common positive or negative grounding a terminal, Integrated data logger, night light and morning light function, self-test function, Monthly maintenance charge electronic protection functions: overcharge protection, discharge protection, reverse polarity protection of load, module and battery Automatic electronic fuse, short circuit protection of load and module overvoltage protection at module input Open circuit protection without battery reverse current protection at night Overtemperature and overload protection, shutdown battery overvoltage displays: graphic LCD display for operating parameters, fault messages, self test operation: Simple menu-driven operation, programming by buttons Manual load switch, certificates: Weltbankzertifik at, CE compliant for Nepal, RoHS compliant, Made in Germany, developed in Germany Manufactured according to ISO 9001 and ISO 14001, Options: Prepayment interface External temperature sensor Alarm contact, 2 / 24V 30A module current, 30A load current, graphic LCD displayPart No: 104517Manufacturer: StecaProduct Weight: 0.35 kgWeight incl. Packaging: 0.45 kgDimensions: 187 x 96 x 44 mm (L x B x H)

The Steca PR 10-30 charge controller series is the highlight among the solar loaders. The latest charging technologies combined with a significantly improved Steca-Atonic charging state determination result in optimal battery care and control of the up to 900 WP module power that can be connected. A large display provides the user about all operating states with the help of symbols. The state of charge is visually presented in the manner of a fuel gauge. Data such as B. voltage, electricity and charging status can also be displayed digitally as a number on the display. The controller also has an energy meter that the user can reset.Functions: Hybrid controller, charging status calculation by Steca Atonic (SOC), automatic voltage adjustment, PWM control, multi-stage charging technology, SoC-dependent load absorption threshold, automatic load recovery, temperature compensation, common positive or negative grounding of a clamp, integrated data logger, night light and tomorrow light function, Self-test function, monthly maintenance charging, electronic protective functions: overload, deep release, discharge protection of module, load and battery, automatic electronic backup, short-circuit protection of load and module, overvoltage protection at the module input, idle protection without battery protection at night, overload and overload protection, shutdown with battery overvoltage , Show: Graphics LCD display for operating parameters, fault messages, self-test, operation: simple menu-listed operation, programming through buttons, manual load switches, certificates: World Bank certificate AT for Nepal, CE-compliant, raw-compliant, made in Germany, developed in Germany, manufactured under ISO 9001 and ISO 14001, options: prepayment interface, external temperature sensor, alarm contact,12/24V 20A module current, 20A load current, graphic LCD displayArticle No.: 104516Manufacturer: StecaProduct weight: 0.35 kgWeight including packaging: 0.45 kgDimensions: 187 x 96 x 44 mm (L x W x H)

The Steca PR 10-30 charge controller series is the highlight of the solar charge controllers. The latest charging technologies, combined with a much improved Steca-AtonIC charge state determination result in an optimum battery maintenance and control of up to 900 Wp module power that can be connected. A large display informs the user with the help of icons all operating conditions. The state of charge is represented visually in the form of a fuel gauge. Data such. As voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter, the user can reset itself.Functions: Hybrid controller, state of charge calculating PWM shunt (SOC), Automatic detection of voltage, PWM control Multistage charging technology, SOC-dependent load disconnection, Automatic load reconnection, temperature compensation, common positive or negative grounding a terminal, Integrated data logger, night light and morning light function, self-test function, Monthly maintenance charge electronic protection functions: overcharge protection, discharge protection, reverse polarity protection of load, module and battery Automatic electronic fuse, short circuit protection of load and module overvoltage protection at module input Open circuit protection without battery reverse current protection at night Overtemperature and overload protection, shutdown battery overvoltage displays: graphic LCD display for operating parameters, fault messages, self test operation: Simple menu-driven operation, programming by buttons Manual load switch, certificates: Weltbankzertifik at, CE compliant for Nepal, RoHS compliant, Made in Germany, developed in Germany Manufactured according to ISO 9001 and ISO 14001, Options: Prepayment interface External temperature sensor Alarm contact, 12 / 24V 15A module current, 15A load current, graphic LCD displayPart No: 104515Manufacturer: StecaProduct Weight: 0.35 kgWeight incl. Packaging: 0.45 kgDimensions: 187 x 96 x 44 mm (L x B x H)

The Steca PR 10-30 charge controller series is the highlight of the solar charge controllers. The latest charging technologies, combined with a much improved Steca-AtonIC charge state determination result in an optimum battery maintenance and control of up to 900 Wp module power that can be connected. A large display informs the user with the help of icons all operating conditions. The state of charge is represented visually in the form of a fuel gauge. Data such. As voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter, the user can reset itself.Functions: Hybrid controller, state of charge calculating PWM shunt (SOC), Automatic detection of voltage, PWM control Multistage charging technology, SOC-dependent load disconnection, Automatic load reconnection, temperature compensation, common positive or negative grounding a terminal, Integrated data logger, night light and morning light function, self-test function, Monthly maintenance charge electronic protection functions: overcharge protection, discharge protection, reverse polarity protection of load, module and battery Automatic electronic fuse, short circuit protection of load and module overvoltage protection at module input Open circuit protection without battery reverse current protection at night Overtemperature and overload protection, shutdown battery overvoltage displays: graphic LCD display for operating parameters, fault messages, self test operation: Simple menu-driven operation, programming by buttons Manual load switch, certificates: Weltbankzertifik at, CE compliant for Nepal, RoHS compliant, Made in Germany, developed in Germany Manufactured according to ISO 9001 and ISO 14001, Options: Prepayment interface External temperature sensor Alarm contact, 12 / 24V 10A module current, 10A load current, graphic LCD displayPart No: 104514Manufacturer: StecaProduct Weight: 0.35 kgWeight incl. Packaging: 0.45 kgDimensions: 187 x 96 x 44 mm (L x B x H)

The simplicity and high performance of the new Solarix PRS solar charge controller make it particularly attractive. Here Steca latest algorithms are used to ensure optimal battery maintenance. The Solarix PRS charge controllers are equipped with an electronic fuse, thus providing optimal protection. They operate on the serial principle, and separate the solar module from the battery, to protect against Überladung.Die Solarix PRS charge controllers are universal charging controller: They can be used with lead-acid batteries or gel batteries, without the need for complex configuration settings. For larger projects, the charge controllers can also be equipped with special functions: eg. B. with night light function and selectable charging plateau and Tiefentladeschutzspannungen.Product features: series regulators, Automatic detection of voltage, voltage and current control, PWM control Multistage charging technology, power compensated load disconnection, Automatic load reconnection, temperature compensation, common positive or negative grounding a terminal self-test function, Monthly maintenance charge, electronic protection: Overcharge protection, discharge protection, polarity reversal protection of load, module and battery Automatic electronic fuse, short circuit protection of load and module overvoltage protection at module input Open circuit protection without battery reverse current protection at night Overtemperature and overload protection, shutdown battery overvoltage, displays: multifunction LED display Multi-colored LED, 5 LEDs show operating states for operation, state of charge, fault messages, options: night light function works or via Steca PA RC100 adjustable parameterisation of function values

The simplicity and high performance of the new Solarix PRS solar charge controller make it particularly attractive. Here Steca latest algorithms are used to ensure optimal battery maintenance. The Solarix PRS charge controllers are equipped with an electronic fuse, thus providing optimal protection. They operate on the serial principle, and separate the solar module from the battery, to protect against Überladung.Die Solarix PRS charge controllers are universal charging controller: They can be used with lead-acid batteries or gel batteries, without the need for complex configuration settings. For larger projects, the charge controllers can also be equipped with special functions: eg. B. with night light function and selectable charging plateau and Tiefentladeschutzspannungen.Product features: series regulators, Automatic detection of voltage, voltage and current control, PWM control Multistage charging technology, power compensated load disconnection, Automatic load reconnection, temperature compensation, common positive or negative grounding a terminal self-test function, Monthly maintenance charge, electronic protection: Overcharge protection, discharge protection, polarity reversal protection of load, module and battery Automatic electronic fuse, short circuit protection of load and module overvoltage protection at module input Open circuit protection without battery reverse current protection at night Overtemperature and overload protection, shutdown battery overvoltage, displays: multifunction LED display Multi-colored LED, 5 LEDs show operating states for operation, state of charge, fault messages, options: night light function works or via Steca PA RC100 adjustable parameterisation of function values